A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 D D D D D D D Short-Circuit Protection Offset-Voltage Null Capability Large Common-Mode and Differential Voltage Ranges No Frequency Compensation Required Low Power Consumption No Latch-Up Designed to Be Interchangeable With Fairchild A741 description The A741 is a general-purpose operational amplifier featuring offset-voltage null capability. A741M . . . J PACKAGE (TOP VIEW) NC NC OFFSET N1 IN - IN + VCC - NC OFFSET N1 IN - IN + VCC - The A741C is characterized for operation from 0C to 70C. The A741I is characterized for operation from - 40C to 85C.The A741M is characterized for operation over the full military temperature range of - 55C to 125C. NC OFFSET N1 IN - IN + VCC - 13 3 12 4 11 5 10 6 9 7 8 NC NC NC VCC + OUT OFFSET N2 NC 1 8 2 7 3 6 4 5 NC VCC+ OUT OFFSET N2 A741M . . . U PACKAGE (TOP VIEW) symbol 1 10 2 9 3 8 4 7 5 6 NC NC VCC + OUT OFFSET N2 A741M . . . FK PACKAGE (TOP VIEW) NC OFFSET N1 NC NC NC OFFSET N1 + OUT IN - 14 2 A741M . . . JG PACKAGE A741C, A741I . . . D, P, OR PW PACKAGE (TOP VIEW) The high common-mode input voltage range and the absence of latch-up make the amplifier ideal for voltage-follower applications. The device is short-circuit protected and the internal frequency compensation ensures stability without external components. A low value potentiometer may be connected between the offset null inputs to null out the offset voltage as shown in Figure 2. IN + 1 - OFFSET N2 4 3 2 1 20 19 18 5 17 6 16 7 15 8 14 9 10 11 12 13 NC VCC + NC OUT NC NC VCC- NC OFFSET N2 NC NC IN - NC IN + NC NC - No internal connection Copyright 2000, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 AVAILABLE OPTIONS PACKAGED DEVICES SMALL OUTLINE (D) TA CHIP CARRIER (FK) CERAMIC DIP (J) CERAMIC DIP (JG) PLASTIC DIP (P) TSSOP (PW) A741CPW 0C to 70C A741CD A741CP - 40C to 85C A741ID A741IP - 55C to 125C A741MFK A741MJ A741MJG FLAT PACK (U) CHIP FORM (Y) A741Y A741MU The D package is available taped and reeled. Add the suffix R (e.g., A741CDR). schematic VCC+ IN - OUT IN+ OFFSET N1 OFFSET N2 VCC - Component Count Transistors Resistors Diode Capacitor 2 POST OFFICE BOX 655303 22 11 1 1 * DALLAS, TEXAS 75265 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 A741Y chip information This chip, when properly assembled, displays characteristics similar to the A741C. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS (7) (6) IN + (3) (2) IN - (8) OFFSET N1 (1) OFFSET N2 (5) VCC+ (7) + (6) OUT - (4) VCC - 45 (5) (1) (4) CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 x 4 MINIMUM TJmax = 150C. (2) (3) TOLERANCES ARE 10%. ALL DIMENSIONS ARE IN MILS. 36 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) A741C A741I A741M UNIT Supply voltage, VCC+ (see Note 1) 18 22 22 V Supply voltage, VCC - (see Note 1) -18 - 22 - 22 V Differential input voltage, VID (see Note 2) 15 30 30 V Input voltage, VI any input (see Notes 1 and 3) 15 15 15 V Voltage between offset null (either OFFSET N1 or OFFSET N2) and VCC - 15 0.5 0.5 V Duration of output short circuit (see Note 4) unlimited Continuous total power dissipation unlimited unlimited See Dissipation Rating Table 0 to 70 - 40 to 85 - 55 to 125 C - 65 to 150 - 65 to 150 Operating free-air temperature range, TA - 65 to 150 C Case temperature for 60 seconds FK package 260 C Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds J, JG, or U package 300 C Storage temperature range Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds D, P, or PW package 260 260 C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC - . 2. Differential voltages are at IN+ with respect to IN -. 3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less. 4. The output may be shorted to ground or either power supply. For the A741M only, the unlimited duration of the short circuit applies at (or below) 125C case temperature or 75C free-air temperature. DISSIPATION RATING TABLE 4 PACKAGE TA 25C POWER RATING DERATING FACTOR D 500 mW 5.8 mW/C DERATE ABOVE TA 64C 464 mW 377 mW N/A FK 500 mW 11.0 mW/C 105C 500 mW 500 mW 275 mW J 500 mW 11.0 mW/C 105C 500 mW 500 mW 275 mW JG 500 mW 8.4 mW/C 90C 500 mW 500 mW 210 mW P 500 mW N/A N/A 500 mW 500 mW N/A PW 525 mW 4.2 mW/C 25C 336 mW N/A N/A U 500 mW 5.4 mW/C 57C 432 mW 351 mW 135 mW POST OFFICE BOX 655303 TA = 70C POWER RATING * DALLAS, TEXAS 75265 TA = 85C POWER RATING TA = 125C POWER RATING A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER TEST CONDITIONS VIO Input offset voltage VO = 0 VIO(adj) Offset voltage adjust range VO = 0 IIO Input offset current VO = 0 IIB Input bias current VO = 0 VICR Common-mode input voltage range VOM Maximum peak output voltage swing TA A741C MIN 25C 1 Full range 25C 15 25C 20 Full range 25C 80 Full range 12 RL = 10 k 25C 12 RL 10 k Full range 12 RL = 2 k 25C 10 RL 2 k Full range 10 RL 2 k VO = 10 V 25C 20 Full range 15 25C 0.3 ri Input resistance ro Output resistance Ci Input capacitance CMRR Common-mode rejection j ratio VIC = VICRmin kSVS Supply y voltage g sensitivity y (VIO /VCC) VCC = 9 V to 15 V IOS Short-circuit output current See Note 5 ICC Supply current VO = 0 0, No load PD Total power dissipation VO = 0 0, No load 6 TYP MAX 1 5 6 15 200 20 500 80 13 500 1500 12 13 12 10 nA nA 14 12 13 mV V 12 14 UNIT mV 200 500 800 12 Large-signal g g differential voltage amplification MIN 300 Full range AVD A741I, A741M MAX 7.5 25C VO = 0, TYP V 13 10 200 50 200 V/mV 25 2 0.3 2 M 25C 75 75 25C 1.4 1.4 pF 25C 70 Full range 70 90 70 90 dB 70 25C 30 Full range 150 30 150 150 150 25C 25 40 25 40 25C 1.7 2.8 1.7 2.8 Full range 3.3 25C 50 Full range 3.3 85 50 100 85 100 V/V mA mA mW All characteristics are measured under open-loop conditions with zero common-mode input voltage unless otherwise specified. Full range for the A741C is 0C to 70C, the A741I is - 40C to 85C, and the A741M is - 55C to 125C. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback. operating characteristics, VCC = 15 V, TA = 25C PARAMETER tr Rise time Overshoot factor SR Slew rate at unity gain TEST CONDITIONS VI = 20 mV,, CL = 100 pF, RL = 2 k,, See Figure 1 VI = 10 V, CL = 100 pF, RL = 2 k, See Figure 1 POST OFFICE BOX 655303 A741C MIN * DALLAS, TEXAS 75265 TYP A741I, A741M MAX MIN TYP 0.3 0.3 5% 5% 0.5 0.5 MAX UNIT s V/s 5 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 electrical characteristics at specified free-air temperature, VCC = 15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS VIO VIO(adj) Input offset voltage IIO IIB Input offset current VICR Common-mode input voltage range VOM Maximum peak output voltage swing AVD ri Large-signal differential voltage amplification ro Output resistance Ci Input capacitance CMRR Common-mode rejection ratio kSVS Supply voltage sensitivity (VIO /VCC) IOS ICC Short-circuit output current A741Y MIN VO = 0 VO = 0 Offset voltage adjust range 1 6 80 500 nA 12 14 RL = 2 k 10 13 RL 2 k 20 200 0.3 VIC = VICRmin VCC = 9 V to 15 V VO = 0, VO = 0, 70 No load mV nA RL = 10 k See Note 5 mV 200 13 VO = 0, UNIT 20 12 Input resistance Supply current MAX 15 VO = 0 VO = 0 Input bias current TYP V V V/mV 2 M 75 1.4 pF 90 dB 30 150 V/V 25 40 mA 1.7 2.8 mA PD Total power dissipation No load 50 85 mW All characteristics are measured under open-loop conditions with zero common-mode voltage unless otherwise specified. NOTE 5: This typical value applies only at frequencies above a few hundred hertz because of the effects of drift and thermal feedback. operating characteristics, VCC = 15 V, TA = 25C PARAMETER tr TEST CONDITIONS Rise time Overshoot factor SR 6 Slew rate at unity gain POST OFFICE BOX 655303 VI = 20 mV,, CL = 100 pF, RL = 2 k,, See Figure 1 VI = 10 V, CL = 100 pF, RL = 2 k, See Figure 1 * DALLAS, TEXAS 75265 A741Y MIN TYP 0.3 MAX UNIT s 5% 0.5 V/s A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 PARAMETER MEASUREMENT INFORMATION VI - OUT IN + 0V INPUT VOLTAGE WAVEFDORM CL = 100 pF RL = 2 k TEST CIRCUIT Figure 1. Rise Time, Overshoot, and Slew Rate APPLICATION INFORMATION Figure 2 shows a diagram for an input offset voltage null circuit. IN + + IN - - OUT OFFSET N2 OFFSET N1 10 k To VCC - Figure 2. Input Offset Voltage Null Circuit POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 TYPICAL CHARACTERISTICS INPUT OFFSET CURRENT vs FREE-AIR TEMPERATURE INPUT BIAS CURRENT vs FREE-AIR TEMPERATURE IIIII IIIII IIIII 400 100 350 I IB - Input Bias Current - nA I IO - Input Offset Current - nA 90 VCC+ = 15 V VCC - = -15 V 80 70 60 50 40 30 300 IIIII IIIII VCC+ = 15 V VCC - = -15 V 250 200 150 100 20 50 10 0 - 60 - 40 - 20 0 20 60 40 0 - 60 - 40 - 20 80 100 120 140 TA - Free-Air Temperature - C 0 20 40 60 80 100 120 140 TA - Free-Air Temperature - C Figure 4 Figure 3 MAXIMUM PEAK OUTPUT VOLTAGE vs LOAD RESISTANCE VOM - Maximum Peak Output Voltage - V 14 13 12 VCC+ = 15 V VCC - = -15 V TA = 25C 11 10 9 8 7 6 5 4 0.1 0.2 0.4 0.7 1 2 4 7 10 RL - Load Resistance - k Figure 5 Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices. 8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 TYPICAL CHARACTERISTICS OPEN-LOOP SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs SUPPLY VOLTAGE MAXIMUM PEAK OUTPUT VOLTAGE vs FREQUENCY 16 AVD - Open-Loop Signal Differential Voltage Amplification - V/mV 18 400 VCC+ = 15 V VCC - = -15 V RL = 10 k TA = 25C 14 12 10 8 6 4 VO = 10 V RL = 2 k TA = 25C 200 100 40 20 2 0 100 10 1k 10k 100k 1M 0 2 4 6 8 10 12 14 16 18 20 VCC - Supply Voltage - V f - Frequency - Hz Figure 6 Figure 7 OPEN-LOOP LARGE-SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION vs FREQUENCY 110 VCC+ = 15 V VCC - = -15 V VO = 10 V RL = 2 k TA = 25C 100 AVD - Open-Loop Signal Differential Voltage Amplification - dB VOM - Maximum Peak Output Voltage - V 20 90 80 70 60 50 40 30 20 10 0 -10 1 10 100 1k 10k 100k 1M 10M f - Frequency - Hz POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 9 A741, A741Y GENERAL-PURPOSE OPERATIONAL AMPLIFIERS SLOS094B - NOVEMBER 1970 - REVISED SEPTEMBER 2000 TYPICAL CHARACTERISTICS COMMON-MODE REJECTION RATIO vs FREQUENCY OUTPUT VOLTAGE vs ELAPSED TIME 28 VCC+ = 15 V VCC- = -15 V BS = 10 k TA = 25C 90 80 24 VO - Output Voltage - mV CMRR - Common-Mode Rejection Ratio - dB 100 70 60 50 40 30 20 II 20 90% 16 12 8 10% 0 10 tr 0 -4 1 100 10k 1M 100M 0 0.5 Figure 9 Figure 8 VOLTAGE-FOLLOWER LARGE-SIGNAL PULSE RESPONSE 8 VCC+ = 15 V VCC- = -15 V RL = 2 k CL = 100 pF TA = 25C 6 Input and Output Voltage - V 1 t - Time - s f - Frequency - Hz 4 VO 2 0 VI -2 -4 -6 -8 0 10 20 30 40 50 60 70 t - Time - s Figure 10 10 VCC+ = 15 V VCC- = -15 V RL = 2 k CL = 100 pF TA = 25C 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 80 90 1.5 2 2.5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 2000, Texas Instruments Incorporated