Model S-7000 Surface Mount Code Switch 7 mm Square SPECIFICATIONS General Operating Temp. Range Storage Temp. Range Sealing Method Electrical Contact Rating Non-Switching Switching Contact Resistance Insulation Resistance Dielectric Strength Features z z z z z Mechanical Shaft Torque Number Of Positions Step Angle Rotational Life Hexadecimal or Decimal to Binary Sealed to Allow for Automatic Processing Gull Wing and J Lead or Leaded Highly Automated Assembly Bulk or Tape and Reel Packaging Part Number S-7 0 1 0 Model Shaft Type 0 = Flush Code Type 1 = Decimal Real 3 = Decimal Complementary 5 = Hexadecimal Real 7 = Hexadecimal Complementary Adjustment 0 = Top 1 = Side Packaging Blank = Bulk T = Tape and Reel/500 Units Terminal Type A = J Hook B = Gull Wing C = Thru Hole Marking Units Marked With Two Digit Date Code, Mark for Complementary Code and Switch Position Marks T A Environmental Thermal Shock: (-25C to +70C, 30 min Dwell, 5 Cycles) Humidity: (90 95% RH, 40C, 240 Hrs.) Low Temp. Storage: (-25C, 96 Hrs.) High Temp. Storage: (70C, 96 Hrs.) Rotational Life: (10,000 Steps @ 0 Load or 100 mA, 5 VDC) Soldering Heat: (260C, 10 Sec.) Mechanical Shock: (50 g, 11 mS, Sawtooth, 6 Axes, 3 Cycles) Vibration: (10 g, .060 DA, 10 to 500 Hz., 2 Hrs, 3 Axes) Immersion: : -25C TO +70C : -25C TO +70C : O Ring Sealed : 100 mA @ 50 VDC max. : 100 mA @ 5 VDC max. : 100 mV max. @ 1KHz, 20 mV : 100 MV min @ 100 VDC : 1 mA max. 250 VAC @ 50 Hz For 60 Sec. : 200 g-cm (2.78 oz-in) max. : 10 (Decimal), 16 (Hex) : 36 (Decimal), 22.5 (Hex) : 10,000 Steps min. See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below See Criteria Note Below Contact Bounce 0.1 mS max. Contact Bounce 0.1 mS max. Fluorocarbon Liquid, 85C, 1 min. No Leaks Criteria Note: Contact Resistance Not Greater Than 100 mV Insulation Resistance Not Less Than 100 MV (10 MV Humidity) Shaft Torque Not Greater Than 200 g-cm 52 S-7000 Sealed Surface Mount Coded Switch S-7010A (Real Code) S-7030A (Comp. Code) J Lead Decimal S-7010B (Real Code) S-7030B (Comp. Code) Gull Wing Decimal S-7010C (Real Code) S-7030C (Comp. Code) Thru Hole Decimal Suggested Land Pattern Suggested Land Pattern S-7010A S-7030A S-7010B S-7030B 53 S-7000 Sealed Surface Mount Coded Switch S-7050A (Real Code) S-7070A (Comp. Code) J Lead Hexadecimal S-7050B (Real Code) S-7070B (Comp. Code) Gull Wing Hexadecimal S-7050C (Real Code) S-7070C (Comp. Code) Thru Hole Hexadecimal 54 Suggested Land Pattern Suggested Land Pattern S-7050A S-7070A S-7050B S-7070B S-7000 Sealed Surface Mount Coded Switch S-7011A (Real Code) S-7031A (Comp. Code) J Lead Decimal Side Adjust Available in bulk and tape and reel S-7011B (Real Code) S-7031B (Comp. Code) Gull Wing Decimal Side Adjust Available in bulk and tape and reel S-7011C (Real Code) S-7031C (Comp. Code) Thru Hole Decimal Side Adjust Available in bulk Suggested Land Pattern Suggested Land Pattern S-7011A S-7031A S-7011B S-7031B 55 S-7000 Sealed Surface Mount Coded Switch S-7051A (Real Code) S-7071A (Comp. Code) Side Adjust Hexadecimal Switch J-Lead Available in bulk and tape and reel S-7051B (Real Code) S-7071B (Comp. Code) Side Adjust Hexadecimal Switch Gull-Wing Available in bulk and tape and reel S-7051C (Real Code) S-7071C (Comp. Code) Side Adjust Hexadecimal Switch Thru-Hole Available in bulk 56 Suggested Land Pattern Suggested Land Pattern S-7051A S-7071A S-7051B S-7071B S-7000 Sealed Surface Mount Coded Switch Tape Dimensions Tape Dimensions (Side Adjust) SELECTOR POSITION 16 POSITION, BINARY CODED HEXADECIMAL (BCH) 10 POSITION, BINARY CODED DECIMAL (BCD) PIN 0 1 2 3 4 5 6 7 8 9 A B C D E F REAL CODE 1 2 4 COMPLEMENTARY CODE 8 1 2 4 8 Code Format CONTACT CLOSED 57