SKA15 9.9~15W DC-DC Regulated Single Output Converter EE1/2 EE EE EE EE EE series Features : 2:1 wide input range 4:1 wide input range(option) 1000VDC I/O isolation 3000VDC I/O isolation(option) Built-in EMI filter Protections: Short circuit / Overload Cooling by free air convection Six-sided shield metal case 100% burn-in test Low cost / High reliability Approvals: FCC / CE 2 years warranty SPECIFICATION ORDER NO. OUTPUT DC VOLTAGE SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C- SKA15A- SKA15B- SKA15C033 033 033 05 05 05 12 12 15 15 15 12 3.3V 5V 12V 15V CURRENT RANGE 300 ~ 3000mA 300 ~ 3000mA RATED POWER 9.9W 15W RIPPLE & NOISE (max.) Note.2 50mVp-p LINE REGULATION VOLTAGE ACCURACY SWITCHING FREQUENCY VOLTAGE RANGE EFFICIENCY (Typ.) DC CURRENT 60mVp-p 60mVp-p 150KHz min. A: 9 ~ 18VDC B: 18 ~ 36VDC C: 36 ~ 72VDC 76% 78% 76% 76% 78% Full load A: 1700mA B: 800mA C: 400mA No load A: 20mA C: 15mA B: 30mA 80% 82% 80% 82% 82% 80% 82% Pi network Fuse recommended FILTER PROTECTION 110% ~ 250% rated output power OVER CURRENT Protection type : Hiccup mode, recovers automatically after fault condition is removed All output equipped with short circuit PROTECTION (Note. 5) 100 ~ 1000mA Note.3 LOAD REGULATION INPUT 50mVp-p O0.2% Note.4 O0.5% O2.0% 125 ~ 1250mA SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed J J J -40 ~ +71 (Refer to output load derating curve) 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +105 , 10 ~ 95% RH 0.03% / (0 ~ 50 ) TEMP. COEFFICIENT 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION I/P-O/P:1KVDC WITHSTAND VOLTAGE I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMC EMISSION EMC Compliance to EN55022 Class B, FCC part 15 Class B EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8, light industry level, criteria A WORKING TEMP. WORKING HUMIDITY O J J OTHERS J 300Khrs min. MIL-HDBK-217F(25 ) MTBF DIMENSION 50.8*25.4*11.27 mm or 2"*1"*0.44" inch (L*W*H) WEIGHT 32g Derating Curve Pin Configuration Mechanical Specification Unit:mm(inch) 50.8 11.27 15.2 4 2 BOTTOM VIEW 5 r + 0.2/-0.1 1.0 Output 1 2 3 4 5 + Vi n - Vi n + Vo u t No Pin - Vo u t 5.8 LOAD (%) 1 10.2 10.2 3 Pin No. 100 2.5 20.3 2.5 25.4 10.2 5.1 10.1 15.3 80 -40 0 25 50 60 71 Ta ( NOTE J) 100 J 1.All parameters are specified at normal input, rated load, 25 70% RH ambient. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 3.Line regulation is measured from low line to high line at rated load. 4.Load regulation is measured from 10% to 100% rated load. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds. File Name:SKA15-SPEC 2012-07-18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: SKA-15A-05 SKA15A-12 SKA15A-15 SKA15B-033 SKA15B-05 SKA15B-12 SKA15B-15 SKA15C-033 SKA15C05 SKA15C-12 SKA15C-15