CHEMTRONICS(R) TDS # CW9000 Technical Data Sheet CircuitWorks(R) Flux Remover Pens TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES PRODUCT DESCRIPTION CircuitWorks(R) Flux Remover Pens are designed specifically to remove each type of flux. The Rosin Flux Remover Pen quickly cleans type R, RMA, and RA flux residues. The No Clean Flux Remover Pen precisely removes both organic and synthetic low solid no clean fluxes. A pen for removing rosin flux residues A pen for spot removal of no clean fluxes Penetrates hard to reach areas Marker pen dispenser provides controlled and exact application Removes ionic and non-ionic residues Excellent material compatibility Fast drying TYPICAL APPLICATIONS CircuitWorks(R) Flux Remover Pens remove flux residues and clean precise areas on: Printed Circuit Boards Chip Carriers Heat Sinks Surface Mount Device Pads Switches Sockets Rosin Flux Remover Pen Flash Point (TCC) 70 F (21 C) Vapor Density (air=1) >1 Surface Tension 21.3 dyne/cm Appearance Clear Liquid Odor Alcohol No Clean Flux Remover Pen Flash Point (TCC) 102 F (39 C) Vapor Density (air=1) >1 Surface Tension 17.7 dyne/cm Appearance Clear Liquid Odor Characteristic Water Soluble Flux Remover Pen Flash Point (TCC) Vapor Density (air=1) Surface Tension Appearance Odor Shelflife RoHS/WEEE Status 70 F (21 C) >1 21.1 dyne/cm Clear Liquid Alcohol 5 years COMPATIBILITY CircuitWorks(R) Flux Remover Pens are generally compatible with most materials used in the electronics industry. As with any cleaning agent, material compatibility should be determined on a non-critical area prior to use. USAGE INSTRUCTIONS For industrial use only. Read MSDS carefully prior to use. Hold pen vertically and briefly depress tip to start liquid flow. Rub pen tip on surface to be cleaned. Wipe tip on a ControlWipeTM dry wipe to remove buildup. CAUTION: Product is Flammable - Do not use near sources of ignition and energized equipment. ASSISTANCE Chemtronics(R) provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH401. NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS(R) does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. MANUFACTURED BY: ITW CHEMTRONICS 8125 COBB CENTER DRIVE KENNESAW, GA 30152 REV. C (06/06) 1-770-424-4888 AVAILABILITY CW9100 9 gm (0.32 oz) No Clean Flux Remover Pen CW9200 8 gm (0.28 oz) Rosin Flux Remover Pen DISTRIBUTED BY: TECHNICAL & APPLICATION