131
8533 Series
Applications
Engine area/sensors in harsh environ-
ments, railways (brake system), for all
purposes in severe climatical environ-
ment and high temperature.
Description
• Screw coupling
• Interchangeable and intermateable with
MIL-C 83723 Series III T type
• Plug with self locking system
• High temperature connector
• High level shock and vibration
• Thermocouple contacts available except
hermetic connectors.
Standards
NFL 54143 - EN 2997
Characteristics
Mechanical
• Shell : aluminum alloy (class R-W-A)
stainless steel (class K, E, Y and YE)
• Plating : nickel (class R)
olive green cadmium (class W)
black anodized (class A)
passivated (class K, E, Y and YE)
• Insulator : thermoset
• Grommet and seal : silicone elastomer
• Contact : copper alloy
ferrous alloy (class Y and YE)
• Plating : gold over nickel
• Mechanical endurance :
250 operations (class R and W)
500 operations (class K, E, Y and YE)
• Shock : 300 g during 3 ms
• Vibration : random 5 Hz to 2000 Hz -
1G
2/Hz (2x8 hours)
• Contact retention :
size 20 : 090 N
size 16 : 111 N
size 12 : 133 N
Electrical
• Dielectric withstanding
Altitude Service
At ground 1500 Vrms
15 000 m 600 Vrms
21 000 m 400 Vrms
33 000 m 200 Vrms
• Contact resistance : as per NFL 54143 and
EN 2997
• Insulation resistance :
> 5000 MΩat 500 Vdc
• Max current rating per contact :
size 20 : 7.5 A size 20 : 05 A class Y
size 16 : 13,0 A size 16 : 10 A
}
size 12 : 23,0 A size 12 : 17 A and YE
• Electrical continuity :
- 5 mΩwith RFI shielded
- 60 mΩwithout RFI shielded
• Shielding : to 100 MHz at 1 GHz
attenuation > 65 dB
Climatic
• Working temperature :
- 65°C to 175°C (class W)
- 65°C to 200°C (class R, A, K and Y)
- 65°C to 260°C cyclic (class E and YE)
• Leakage : low pressure immersion -
L54001 and interfacial sealing :
pressure 2kPa
• Hermeticity : differential pressure of 1 bar
(air helium) leakage is ≤0,36 mm3/hr
• Damp heat : as per NFL 54143
and EN 2997
10 cycles of 24 hours
• Salt spray : 48 hours
(class R-K-E-Y and YE)
500 hours (class W)
• Fire resistance : as per NFL 54143 and
EN 2997 (class K and E)
Resistance to fluids
MIL-H 5606 - SKYDROL 500 B4 - LD4
JP5 - MIL-L 7870 A - MIL-L 23699
MIL-L 7808 - MIL-C 25769 - MIL-A 8243
specification
without specification - connector supplied with standard contacts
08 - connector supplied with large barrel contacts
L-connector supplied without contacts
polarization - N-6-7-8-9-Y - see p 136
contact type P-male S - female
contact layouts -see table p 135
shell size - 08-10-12-14-16-18-20-22-24-26-28
S-with 360° teeth
class W-175°C (aluminum version with olive green cadmium plating)
R-200°C (aluminum version with nickel plating)
A-200°C (aluminum version with black anodized plating)
K-200°C (stainless steel version)
E-260°C (stainless steel version)
shell type 0-square flange receptacle
7-jam nut receptacle
3-plug with self locking and RFI shielding
4-plug with self locking
basic series 8533
-
0RS14
-
15 P N •
Ordering information
Environmental connectors
132
8533 Series
polarization see table p 136
contact type P -male only
contact layouts see table p 135
shell size - 08-10-12-14-16-18-20-22-24
plating N-nickel
A-black anodized
W-olive green cadmium
backshell type 31-backnut
52-straight cable clamp
51-elbow cable clamp
basic series 852
-
31N14
Backshells
aluminum version
specification A-obligatory suffix for backshell type 02 only
shell size - 08-10-12-14-16-18-20-22-24
backshell type 01-backnut
02-straight cable clamp
basic series 8527
-
01 14 •
Backshells
stainless steel version
shell size - 08-10-12-14-16-18-20*-22-24*
class Y-200°
YE-260°
shell type 1-solder fixing receptacle
2-square flange receptacle
7-jam nut receptacle
basic series 8533
-
1Y10
-
05 P N
Hermetic connectors
NOTE : for others types and sizes backshells - See catalogue M 85049
* Consult us
shell size - 08-10-12-14-16-18-20-22
plating R-nickel
W-olive green cadmium
A-black anodized
cap type 21-cap for receptacle
22-cap for plug
basic series 83723
-
21 R 14
Protective caps
aluminum version
133
8533 Series
FCI Souriau
EN 2997 AEROSPATIALE ROLLS ROYCE Description
NFL 54143 (1)
Cross reference list
Contact
Class 260° C Class 175° C and 200° C
Female Male Female Male
Stainless
steel
version
Aluminum
version
852-31 •• - ASN-E0455-01 •• N - Backnut
852-52N •• - ASN-E0455-02 •• N - Straight cable clamp
852-51N •• - ASN-E0455-03 •• N - Elbow cable clamp
8527-01 •• - ASN-E0199-01 •• K - Backnut
8527-02 •• A - ASN-E0199-02 •• K - Straight cable clamp
8526-1348 EN 3155-018 M 2020 - - Standard size 20
8526-1349 EN 3155-018 M 1616 NSA 938 151 PA 1600 - Standard size 16
8526-1350 EN 3155-018 M 1212 NSA 938 151 PA 1200 - Standard size 12
8522-2349A EN 3155-018 M 2018 NSA 938 151 PA 2000 - Large barrel size 20
8522-6179A EN 3155-018 M 1614 NSA 938 151 PA 1601 - Large barrel size 16
8526-4175 EN 3155-018 M 1618 NSA 938 151 PA 1602 - Small barrel size 16
8526-5041 EN 3155-018 M 1218 NSA 938 151 PA 1202 - Small barrel size 12
8526-1344 EN 3155-019 F 2020 - - Standard size 20
8526-1346 EN 3155-019 F 1616 NSA 938 152 SA 1600 - Standard size 16
8526-1347 EN 3155-019 F 1212 NSA 938 152 SA 1200 - Standard size 12
8520-292 EN 3155-019 F 2018 NSA 938 152 SA 2000 - Large barrel size 20
8522-6180A EN 3155-019 F 1614 NSA 938 152 SA 1601 - Large barrel size 16
8526-4176 EN 3155-019 F 1618 NSA 938 152 SA 1602 - Small barrel size 16
8526-5591 EN 3155-019 F 1218 NSA 938 152 SA 1202 - Small barrel size 12
8533-1000 EN 3155-004 M 2020 - ESC30 P20 BC Standard size 20
8533-1004 EN 3155-004 M 1616 ASN-E 0445 FW 1600 ESC30 P16 BC Standard size 16
8533-1002 EN 3155-004 M 2018 ASN-E 0445 FW 2001 - Large barrel size 20
8533-1006 EN 3155-004 M 1614 ASN-E 0445 FW 1601 - Large barrel size 16
8533-1008 EN 3155-004 M 1618 ASN-E 0445 FW 1602 - Small barrel size 16
8533-1035 EN 3155-004 M 1212 ASN-E 0445 FW 1200 ESC30 P12 BC Small barrel size 1
8533-1019 EN 3155-044 M 2022 - - Double crimping size 20
8533-1001 EN 3155-005 F 2020 - ESC30 S20 BC Standard size 20
8533-1005 EN 3155-005 F 1616 ASN-E 0446 DW 1600 ESC30 S16 BC Standard size 16
8533-1003 EN 3155-005 F 2018 ASN-E 0446 DW 2001 - Large barrel size 20
8533-1007 EN 3155-005 F 1614 ASN-E 0446 DW 1601 - Large barrel size 16
8533-1009 EN 3155-005 F 1618 ASN-E 0446 DW 1602 - Small barrel size 16
8533-1036 EN 3155-005 F 1212 ASN-E 0446 DW 1200 ESC30 S12 BC Standard size 12
8533-1018 EN 3155-045 F 2022 - - Double crimping size 20
134
8533 Series
FCI Souriau EN 2997 AEROSPATIALE BOEING BOEING ROLLS ROYCE Description
NFL 54143 (1) BACC 63 CN/CM BACC 63 BR/BT(2)
8533-0RS ••-•• P
S■■ 08(3) - ASN-E0454RS ••-•• P
S■■- - - Square flange receptacle
8533-0WS ••-•• P
S■■ 08(3) -- - - -
8533-0RS ••-•• P
S■■EN2997-RS0 ••-•• M
F■■ ----
8533-0WS ••-•• P
S■■ EN2997-WS0 ••-•• M
F■■ ----
8533-0RS ••-•• P
S■■ L EN2997-RS0 ••-•• A
B■■ ASN-E0454RS ••-•• P
S■■A- - -
8533-0WS ••-•• P
S■■ L EN2997-WS0 ••-•• A
B■■----
8533-3RS ••-•• P
S■■ 08(3) - ASN-E0452RS ••-•• P
S■■- - - Plug with self locking
8533-3WS ••-•• P
S■■ 08(3) - - - - - and RFI shielded
8533-3RS ••-•• P
S■■ EN2997-RS6 ••-•• M
F■■ ----
8533-3WS ••-•• P
S■■EN2997-WS6 ••-•• A
B■■----
8533-3RS ••-•• P
S■■ L EN2997-RS6 ••-•• A
B■■ASN-E0452RS ••-•• P
S■■ A- - -
8533-3WS ••-•• P
S■■ L EN2997-WS6 ••-•• A
B■■----
8533-4RS ••-•• P
S■■ 08(3) - ASN-E0451R ••-•• P
S■■- - - plug with self locking
8533-4WS ••-•• P
S■■ 08(3 -- - - -
8533-4RS ••-•• P
S■■ EN2997-R6 ••-•• M
F■■ ----
8533-4WS ••-•• P
S■■ EN2997-W6 ••-•• M
F■■----
8533-4RS ••-•• P
S■■ L EN2997-R6 ••-•• A
B■■ASN-E0451R ••-•• P
S■■A- - -
8533-4WS ••-•• P
S■■ L EN2997-W6 ••-•• A
B■■----
8533-0KS ••-•• P
S■■ 08(3 - - - - - square flange receptacle
8533-0KS ••-•• P
S■■EN2997-S0 ••-•• M
F■■----
8533-0KS ••-•• P
S■■ L EN2997-S0 ••-•• A
B■■----
8533-3KS ••-•• P
S■■ 08(3 - - - - - plug with self locking
8533-3KS ••-•• P
S■■EN2997-S6 ••-•• M
F■■- - - - and RFI shielded
8533-3KS ••-•• P
S■■ L EN2997-S6 ••-•• A
B■■----
8533-4KS ••-•• P
S■■ 08(3) - - - - - plug with self locking
8533-4KS ••-•• P
S■■EN2997-K6 ••-•• M
F■■----
8533-4KS ••-•• P
S■■ L EN2997-K6 ••-•• A
B■■----
8533-1Y ••-•• P ■■EN2997-Y1 ••-•• M ■■- - - - solder fixing receptacle
8533-2Y ••-•• P ■■EN2997-Y0 ••-•• M ■■----
square flange hermetic receptacle
8533-7Y ••-•• P ■■EN2997-Y7 ••-•• M ■■----
jam nut hermetic receptacle
8533-0ES ••-•• P
S■■ 08(3 - ASN-E0444SE ••-•• P
S■■- - - square flange receptacle
8533-0ES ••-•• P
S■■EN2997-SE0 ••-•• M
F■■- BACC63CN••-•• P
S■■ A BACC63BT ••B•• P
S■■ A-
8533-0ES ••-•• P
S■■ L EN2997-SE0 ••-•• A
B■■ASN-E0444SE ••-•• P
S■■ A BACC63CN••-•• P
S■■BACC63BT ••B•• P
S■■ ESC10KE0 ••-•• P
S■■
8533-3ES ••-•• P
S■■ 08(3) - ASN-E0442SE ••-•• P
S■■- - - plug with self locking
8533-3ES ••-•• P
S■■EN2997-SE6 ••-•• M
F■■- BACC63CM••-•• P
S■■ A BACC63BR ••B•• P
S■■A - and RFI shielded
8533-3ES ••-•• P
S■■ L EN2997-SE6 ••-•• A
B■■ASN-E0442SE••-•• P
S■■A BACC63CM••-•• P
S■■BACC63BR ••B•• P
S■■ ESC10SE6 ••-•• P
S■■
8533-4ES ••-•• P
S■■ 08(3) - ASN-E0441KE••-•• P
S■■- - - plug with self locking
8533-4ES ••-•• P
S■■EN2997-KE6 ••-•• M
F■■----
8533-4ES ••-•• P
S■■ L EN2997-KE6 ••-•• A
B■■ASN-E0441KE••-•• P
S■■A - - ESC10KE6 ••-•• P
S■■
8533-KE5 •• EN2997-KE5 •• - - - - dummy receptacle
8533-1YE ••-•• P ■■EN2997-YE1 ••-•• M ■■- - - ESC10YE1 ••-•• P ■■solder fixing receptacle
8533-2YE ••-•• P ■■EN2997-YE0 ••-•• M ■■- - - ESC10YE2 ••-•• P ■■
square flange hermetic receptacle
8533-7YE ••-•• P ■■EN2997-YE7 ••-•• M ■■----
jam nut hermetic receptacle
Cross reference list
Stainless steel version Aluminum version
Class 260° C Class 175° C and 200° C
(1) : Part numbers in specification NLF 54143. Replace EN 2997 by 3.
(2) : Superseded by BACC 63 CN/CM
(3) : 08 for #20 contacts layouts
135
8533 Series
Contact layouts
viewed from front face of male insulator ▲ class 200°C ■ class 260°C ●hermetic
▲ ■ ● ▲ ■
08
08-03 3#20 08-98 3#20
▲ ■ ● ▲ ■ ●
10
10-05 5#20 10-06 6#20
▲ ■ ● ▲ ■ ●
12
12-03 3#16 12-12 12#20
▲ ■ ● ▲ ■ ● ▲ ■ ●
14
14-04 4#12 14-07 7#16 14-15 15#20
▲ ■ ▲ ■ ● ▲
16
4 Coax 50 Ω
16-10 10#16 16-24 24#20 SN393 1#16
▲ ■ ▲ ■ ● ▲ ■
18
18-14 14#16 18-31 31#20 18-08 8#12
▲ ■ ▲ ■ ▲ ■
20
37#20
20-39 2#16 20-41 41#20 20-16 16#16
▲ ■ ▲ ■ ▲ ■ ●
22
22-12 12#12 22-19 19#16 22-55 55#20
▲ ■ ▲ ■
24
24-61 61#20 24-30 30#16
▲ ■
28
28-42 42#16
1
2
34
5
Consult us - Special product.
For other contacts layout please consult us.
136
8533 Series
alternative shell key and insert positions (MIL STD 1554)
positions shell 20 shell 22 shell 24 shell 28
key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°
N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265
6 0 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259
7 0 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342
8 0 84 152 204 334
9 0 24 135 199 240
Y 0 98 152 268 338
alternative shell key and insert positions (MIL STD 1554)
positions shell 08 shell 10 shell 12 shell 14 shell 16 shell 18
key e°insert a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d° a° b° c° d°
N 0 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265 105 140 215 265
6 0 102 132 248 320 102 132 248 320 18 149 192 259 18 149 192 259 18 149 192 259 18 149 192 259
7 0 80 118 230 312 80 118 230 312 92 152 222 342 92 152 222 342 92 152 222 342 92 152 222 342
8 0 35 140 205 275 35 140 205 275 84 152 204 334 84 152 204 334 84 152 204 334 84 152 204 334
9 0 24 135 199 240 24 135 199 240 24 135 199 240
Y 0 98 152 268 338 98 152 268 338
Polarization
Crimp contacts
contact type part numbers code by colour bands admissible wire section external ø over insulator
size male contact female contact AWG mm2min. Max.
20 standard 8526-1348 8526-1344 red - red 24-20 0.21-0.60 0.85 2.10
large barrel 8522-2349A 8520-292 red - violet 22-18 0.38-0.93 0.85 2.10
standard 8526-1349 8526-1346 blue - blue 20-16 0.60-1.34 1.20 2.70
16 large barrel 8522-6179A 8522-6180A blue - orange 18-14 0.93-1.91 1.20 2.70
small barrel 8526-4175 8526-4176 blue - orange 22-18 0.38-0.93 1.20 2.70
12 standard 8526-1350 8526-1347 yellow - yellow 14-12 1.91-3.18 1.90 4.01
small barrel 8526-5041 8526-5591 yellow - violet 22-18 0.38-0.93 1.90 4.01
20 standard 8533-1000 8533-1001 red - red + 1 white dot 24-20 0.25-0.60 0.85 2.10
small barrel 8533-1002 8533-1003 red - violet + 1 white dot 22-18 0.38-0.93 0.85 2.10
20 double crimping 8533-1019 8533-1018 red - green + 1 white dot 22 0.4 - 1.25
standard 8533-1004 8533-1005 blue - blue + 1 white dot 20-16 0.60-1.34 1.20 2.70
16 large barrel 8533-1006 8533-1007 blue - orange + 1 white dot 18-14 0.93-1.91 1.20 2.70
small barrel 8533-1008 8533-1009 blue - violet + 1 white dot 22-18 0.38-0.93 1.20 2.70
12 standard 8533-1035 8533-1036 yellow - yellow + 1 white dot 14-12 1.91-3.18 1.90 4.01
class 175°C and 200°C
class 260°C
view of front face of plug
Thermocouple contacts
contact
type male contact female contact admissible wire section external ø over insulator
size C : chromel part code by colour part code by colour
A : alumel numbers bands numbers bands AWG mm2min. Max.
standard
C 8522-875A
brown-orange-green
8522-877A brown-yel.-brown
24-20 0.21-0.60 0.85 2.10
20
A 8522-876A
brown-orange-yel.
8522-878A brown-yel.-black
large barrel
C 8522-3761 yellow 2 dots 8522-3770 yellow 2 dots
22-18 0.38-0.93 0.85 2.10
A 8522-3760 black 2 dots 8522-3771 black 2 dots
16 standard
C 8522-881 yellow 1 dot 8522-883 yellow 1 dot
20-16 0.60-1.34 1.20 2.70
A 8522-882 black 1 dot 8522-884 black 1 dot
12 standard
C 8522-887 yellow 1 dot 8522-889 yellow 1 dot
14-12 1.91-3.18 1.90 4.01
A 8522-888 black 1 dot 8522-890 black 1 dot
class 175°C and 200°C
137
8533 Series
Dimensions
Plug type 3 classes WS - RS - KS - ES and type 4 classes WS - AS - KS - ES with backshells
Aluminum backshells
Stainless steel backshells
shell 08 10 12 14 16 18 20 22 24 28
size
A Max 21.30 24.90 29.60 31.25 34.42 37.34 41.91 44.07 47.24 52.00
.839 .980 1.165 1.230 1.355 1.470 1.650 1.735 1.860 2.047
B1/2”-20 5/8”-24 3/4”-20 7/8”-20 1”-20
1-1/16”-18 1-3/16”-18 1-5/16”-18 1-7/16”-18 1-3/4”-18
UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF UNEF
Thread 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A
CMax 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50 34.50
1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358 1.358
DMax 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -
E6.75 9.40 12.80 14.75 17.93 19.94 23.11 26.29 29.20 -
.266 .370 .504 .581 .706 .785 .910 1.035 1.150 -
FMax 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -
.506 .506 .506 .506 .506 .506 .506 . 506 .506 -
L1 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -
G
min 3.20 4.75 7.40 8.90 12.75 13.45 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .530 .581 .644 .707 -
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -
HMax 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -
JMax 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -
L2 Max 45.80 47.60 51.00 51.00 54.00 61.00 63.60 67.50 69.90 -
1.803 1.874 2.008 2.008 2.126 2.402 2.504 2.657 2.752 -
NMax 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -
L
min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .518 .581 .644 .707 -
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -
MMax 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -
L3 Max 50.75 52.45 55.05 56.55 60.45 61.85 63.40 65.05 66.65 -
1.998 2.065 2.167 2.226 2.380 2.435 2.496 2.561 2.624 -
PMax 15.20 18.30 21.50 24.70 28.70 29.60 32.90 36.00 39.50 -
.598 .720 .846 .972 1.130 1.165 1.295 1.417 1.555 -
QMax 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -
.295 .382 .508 .587 .711 .789 .921 1.039 1.161 -
RMax 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -
.500 .500 .500 .500 .500 .500 .500 .500 .500 -
L4 Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 -
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 -
S
min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -
.125 .187 .291 .351 .501 .518 .581 .644 .706 -
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -
.204 .286 .416 .476 .623 .706 .831 .956 1.081 -
T Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -
U Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -
L5 Max 45.80 48.65 51.80 51.80 55.00 61.35 64.80 67.70 70.90 -
1.803 1.915 2.039 2.039 2.165 2.415 2.551 2.665 2.791 -
Ø for flange
Ø for flange Ø for flange
Backnut 31
Straight
cable clamp
52
Elbow
cable clamp
51
Backnut 01
Straight
cable clamp
02
138
8533 Series
shell 08 10 12 14 16 18 20 22 24 28
size
A Max 14.27 17.48 22.22 23.83 26.97 30.18 33.32 36.53 39.67 45.99
.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562 1.811
BMax 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35 18.35
.722 .722 .722 .722 .722 .722 .722 .722 .722 .722
C Max 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45 1.45
.057 .057 .057 .057 .057 .057 .057 .057 .057 .057
DMax 12.66 15.84 19.02 22.19 25.36 26.95 30.12 33.30 36.47 44.41
.498 .624 .749 .874 .998 1.061 1.186 1.311 1.436 1.748
EMax 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417
F Max 20.75 23.95 26.31 28.69 31.88 34.24 36.63 39.80 43.38 50.83
.817 .943 1.036 1.130 1.255 1.348 1.442 1.567 1.708 2.001
G15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67
.594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562
H Max 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.90 3.90
.122 .122 .122 .122 .122 .122 .122 .122 .154 .154
JMax 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45 -
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593 -
K6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45 -
.266 .370 .504 .581 .707 .785 .909 1.035 1.593 -
L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 -
.506 .506 .506 .506 .506 .506 .506 .506 .506 -
L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -
M
min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .518 .581 .644 .707 -
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -
N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10 -
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776 -
P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75 -
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841 -
L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50 -
1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815 -
QMax 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10 -
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421 -
R
min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95 -
.126 .187 .291 .350 .502 .518 .581 .644 .707 -
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50 -
.205 .285 .417 .476 .626 .705 .831 .957 1.083 -
S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50 -
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713 -
L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25 -
2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687 -
T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50 -
.598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555 -
U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50 -
.295 .382 .508 .587 .711 .789 .921 1.039 1.161 -
V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 -
.500 .500 .500 .500 .500 .500 .500 .500 .500 -
L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 -
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 -
W
min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93 -
.125 .187 .291 .351 .501 .518 .581 .644 .706 -
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46 -
.204 .286 .416 .476 .625 .706 .831 .956 1.081 -
X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10 -
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776 -
Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60 -
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874 -
L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60 -
1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858 -
Square flange receptacle type 0 classes WS - RS - AS - KS - ES with backshells
Aluminum backshells
Stainless steel backshells
Thread as plug (DIM.B)
Ø for flange
Ø for flange
Ø for flange
Backnut 31
Straight
cable clamp
52
Elbow
cable clamp
51
Backnut 01
Straight
cable clamp
02
139
8533 Series
Jam nut receptacle type 7 classes WS - RS - AS - KS - ES with backshells
Aluminum backshells
Stainless steel backshells
shell 08 10 12 14 16 18 20 22 24
size
A Max 14.27 17.47 22.22 23.82 26.97 30.18 33.32 36.53 39.67
.562 .688 .875 .938 1.062 1.188 1.312 1.438 1.562
B Max 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84 19.84
.781 .781 .781 .781 .781 .781 .781 .781 .781
D
min 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125
Max 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57 1.57
.062 .062 .062 .062 .062 .062 .062 .062 .062
E Max 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00 36.00
1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417 1.417
F Max 27.38 30.28 35.05 38.51 41.68 44.86 49.63 52.78 55.42
1.078 1.192 1.380 1.516 1.641 1.766 1.954 2.078 2.182
G Max 24.89 28.04 32.79 35.33 38.51 41.68 44.86 49.63 52.81
.980 1.104 1.291 1.391 1.516 1.641 1.766 1.954 2.079
HMax 21.06 24.23 29.01 30.61 33.76 36.96 40.11 43.31 46.46
.829 .954 1.142 1.205 1.329 1.455 1.579 1.705 1.829
J Max 15.65 18.60 21.75 24.95 28.20 30.90 34.15 37.25 40.45
.616 .732 .856 .982 1.110 1.217 1.344 1.467 1.593
K6.75 9.40 12.80 14.75 17.95 19.95 23.10 26.30 40.45
.266 .370 .504 .581 .707 .785 .909 1.035 1.593
L Max 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85 12.85
.506 .506 .506 .506 .506 .506 .506 .506 .506
L1 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480
M
min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95
.126 .187 .291 .350 .502 .518 .581 .644 .707
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50
.205 .285 .417 .476 .626 .705 .831 .957 1.083
N Max 19.10 21.10 25.10 26.60 33.50 36.90 39.50 42.00 45.10
.752 .831 .988 1.047 1.319 1.453 1.555 1.654 1.776
P Max 22.65 24.45 27.85 27.85 30.85 37.85 40.45 44.35 46.75
.892 .963 1.096 1.096 1.215 1.490 1.593 1.746 1.841
L2 Max 47.40 49.20 52.60 52.60 55.60 62.60 65.20 69.10 71.50
1.866 1.937 2.071 2.071 2.189 2.465 2.567 2.720 2.815
O Max 20.50 22.00 23.60 25.20 26.80 31.30 32.90 34.50 36.10
.807 .866 .929 .992 1.055 1.232 1.295 1.358 1.421
R
min 3.20 4.75 7.40 8.90 12.75 13.15 14.75 16.35 17.95
.126 .187 .291 .350 .502 .518 .581 .644 .707
Max 5.20 7.25 10.60 12.10 15.90 17.90 21.10 24.30 27.50
.205 .285 .417 .476 .626 .705 .831 .957 1.083
S Max 27.60 29.30 31.90 33.40 37.30 38.70 40.25 41.90 43.50
1.087 1.154 1.256 1.315 1.469 1.524 1.585 1.650 1.713
L3 Max 52.35 54.05 56.65 58.15 62.05 63.45 65.00 66.65 68.25
2.061 2.128 2.230 2.289 2.443 2.498 2.559 2.624 2.687
T Max 15.20 18.30 21.50 24.70 28.10 29.60 32.90 36.00 39.50
.598 .720 .846 .972 1.106 1.165 1.295 1.417 1.555
U Max 7.50 9.70 12.90 14.90 18.05 20.05 23.40 26.40 29.50
.295 .382 .508 .587 .711 .789 .921 1.039 1.161
V Max 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70 12.70
.500 .500 .500 .500 .500 .500 .500 .500 .500
L4 Max 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60 37.60
1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480 1.480
W
min 3.18 4.75 7.40 8.91 12.72 13.16 14.76 16.36 17.93
.125 .187 .291 .351 .501 .354 .581 .644 .706
Max 5.18 7.26 10.57 12.10 15.88 17.93 21.11 24.28 27.46
.204 .286 .416 .476 .625 .706 .831 .956 1.081
X Max 19.10 21.15 25.10 26.60 33.50 36.90 39.60 42.00 45.10
.752 .833 .988 1.047 1.319 1.453 1.559 1.654 1.776
Y Max 22.50 25.35 28.50 28.50 31.70 38.05 41.50 44.40 47.60
.886 .998 1.122 1.122 1.248 1.498 1.634 1.748 1.874
L5 Max 47.40 50.25 53.40 53.40 56.60 62.95 66.40 69.30 72.60
1.866 1.978 2.102 2.102 2.228 2.478 2.614 2.728 2.858
Thread as plug (DIM.B)
Ø for flange
Ø for flange
Ø for flange
Backnut 31
Straight
cable clamp
52
Elbow
cable clamp
51
Backnut 01
Straight
cable clamp
02
140
8533 Series
Panel cut-out Type 0
Panel cut-out Type 7
Dimensions
Hermetic receptacle Type 1Y/1YE
shell 08 10 12 14 16 18 20 22 24 28
size
Amin 15.80 18.70 23.40 24.90 28.30 31.10 34.50 37.50 40.60 48.00
.622 .736 .921 .980 1.114 1.224 1.358 1.476 1.598 1.890
E15.09 18.26 20.62 23.01 24.61 26.97 29.36 31.75 34.92 39.67
.594 .719 .812 .906 .969 1.062 1.156 1.250 1.375 1.562
J3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.20 3.80 3.80
.126 .126 .126 .126 .126 .126 .126 .126 .150 .150
CMax 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125
DMax 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125 .125
shell 08 10 12 14 16 18 20 22 24
size
J16.00 19.17 23.92 25.52 28.70 31.87 35.05 38.22 41.40
.630 .755 .942 1.005 1.130 1.255 1.380 1.505 1.630
H15.24 18.41 23.16 24.76 27.94 30.99 34.16 37.33 40.51
.600 .725 .912 .975 1.100 1.220 1.345 1.470 1.595
KMax 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18 3.18
.125 .125 .125 .125 .125 .125 .125 .125 .125
Panel cut-out
shell A B C D E F G ØJ
size Max Max Max Max Max Max Max min
08 1.45 22.05 18.45 14.29 18.12 12.70 26.50 12.96
.057 .868 .726 .563 .713 .500 1.043 .510
10 1.45 22.05 18.45 17.46 21.52 14.25 26.50 14.53
.057 .868 .726 .687 .847 .561 1.043 .572
12 1.45 22.05 18.45 22.22 26.57 19.05 26.50 19.30
.057 .868 .726 .875 1.046 .750 1.043 .760
14 1.45 22.05 18.45 23.81 27.82 20.60 26.50 20.88
.057 .868 .726 .937 1.095 .811 1.043 .822
16 1.45 22.05 18.45 26.99 30.92 23.79 26.50 24.05
.057 .868 .726 1.063 1.217 .937 1.043 .947
18 1.45 22.05 18.45 30.16 34.22 26.95 26.50 27.23
.057 .868 .726 1.187 1.347 1.061 1.043 1.072
20* 1.45 22.05 18.45 33.34 37.22 30.12 26.50 30.40
.057 .868 .726 1.313 1.465 1.186 1.043 1.097
22 1.45 22.05 18.45 36.51 40.62 33.30 26.50 23.58
.057 .868 .726 1.437 1.599 1.311 1.043 .928
24* 1.45 22.05 18.45 39.69 43.62 36.47 26.50 36.70
.057 .868 .726 1.563 1.717 1.436 1.043 1.445
* Consult us
141
8533 Series
Hermetic receptacle type 2Y/2YE Panel cut-out
Hermetic receptacle type 7Y/7YE Panel cut-out
shell A B C D E F G H J
size Max Max Max Max Max Max Max Max Max
08 1.45 18.35 22.05 14.29 12.70 26.50 3.00 20.75 15.09
.057 .722 .868 .563 .500 1.043 .118 .817 .594
10 1.45 18.35 22.05 17.46 14.25 26.50 3.00 23.95 18.26
.057 .722 .868 .687 .561 1.043 .118 .943 .719
12 1.45 18.35 22.05 22.22 19.05 26.50 3.00 26.31 20.62
.057 .722 .868 .875 .750 1.043 .118 1.036 .812
14 1.45 18.35 22.05 23.81 20.60 26.50 3.00 28.69 23.01
.057 .722 .868 .937 .811 1.043 .118 1.130 .906
16 1.45 18.35 22.05 26.99 23.79 26.50 3.00 31.88 24.61
.057 .722 .868 1.063 .937 1.043 .118 1.255 .969
18 1.45 18.35 22.05 30.16 26.95 26.50 3.00 34.24 26.97
.057 .722 .868 1.187 1.061 1.043 .118 1.348 1.062
20* 1.45 18.35 22.05 33.34 30.12 26.50 3.00 36.63 29.36
.057 .722 .868 1.313 1.186 1.043 .118 1.442 1.156
22 1.45 18.35 22.05 36.51 33.30 26.50 3.00 39.80 31.75
.057 .722 .868 1.437 1.311 1.043 .118 1.567 1.250
24* 1.45 18.35 22.05 39.69 36.47 26.50 3.80 43.38 34.92
.057 .722 .868 1.563 1.436 1.043 .150 1.708 1.375
K L M N P
Max min
15.09 3.20 3.18 3.18 15.70
.594 .126 .125 .125 .618
18.26 3.20 3.18 3.18 18.90
.719 .126 .125 .125 .744
20.62 3.20 3.18 3.18 23.50
.812 .126 .125 .125 .925
23.01 3.20 3.18 3.18 25.10
.906 .126 .125 .125 .988
24.61 3.20 3.18 3.18 28.30
.969 .126 .125 .125 1.114
26.97 3.20 3.18 3.18 31.40
1.062 .126 .125 .125 1.236
29.36 3.20 3.18 3.18 34.60
1.156 .126 .125 .125 1.362
31.75 3.20 3.18 3.18 37.80
1.250 .126 .125 .125 1.488
34.92 4.00 3.18 3.18 40.90
1.375 .157 .125 .125 1.610
shell A B C D E F G
size Max Max Max Max Max Max Max
08 2.60 26.50 19.52 14.29 27.35 24.85 20.12
.102 1.043 .769 .563 1.077 .978 .792
10 2.60 26.50 19.52 17.46 30.24 28.00 24.20
.102 1.043 .769 .687 1.191 1.102 .953
12 2.60 26.50 19.52 22.22 35.01 32.75 28.95
.102 1.043 .769 .875 1.378 1.289 1.140
14 2.60 26.50 19.52 23.81 38.46 35.29 30.30
.102 1.043 .769 .937 1.514 1.389 1.193
16 2.60 26.50 19.52 26.99 41.64 38.46 33.45
.102 1.043 .769 1.063 1.639 1.514 1.317
18 2.60 26.50 19.52 30.16 44.81 41.64 34.64
.102 1.043 .769 1.187 1.764 1.639 1.364
20* 3.35 26.50 19.52 33.34 49.60 44.86 39.80
.132 1.043 .769 1.313 1.953 1.766 1.567
22 3.35 26.50 19.52 36.51 52.74 49.59 43.00
.132 1.043 .769 1.437 2.076 1.952 1.693
24* 3.35 26.50 19.52 39.69 55.40 52.81 46.15
.132 1.043 .769 1.563 2.181 2.079 1.817
H J K
Max
15.24 16.00 3.17
.600 .630 .125
18.41 19.17 3.17
.725 .755 .125
23.16 23.92 3.17
.912 .942 .125
24.76 25.52 3.17
.975 1.005 .125
27.94 28.70 3.17
1.100 1.130 .125
30.99 31.87 3.17
1.220 1.255 .125
34.16 35.05 3.17
1.345 1.380 .125
37.33 38.22 3.17
1.470 1.505 .125
40.51 41.40 3.17
1.595 1.630 .125
* Not industrialized
* Not industrialized
4 holes ØG
142
8533 Series
Tooling
crimping
cap for plug cap for receptacle
shells AB
Max Max
08 3.20 134.00
.126 5.276
10 3.20 134.00
.126 5.276
12 3.20 134.00
.126 5.276
14 3.20 134.00
.126 5.276
16 3.20 134.00
.126 5.276
18 3.20 134.00
.126 5.276
22 3.20 134.00
.126 5.276
contact wires part numbers
sizes mm2AWG crimping pliers locator
0.93 18 8365 (M 22520 / 1-01) 8365-02 (M22520 / 1-02)
20 0.60 20 or or
0.38 22 8476-01 (M 22520 / 2-01) 8476-02 (M22520 / 2-02)
0.21 24
1.91 14
1.34 16
16 0.93 18 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
0.60 20
0.38 22
12 3.18 12 8365 (M 22520 / 1-01) 8365-02 (M 22520 / 1-02)
1.91 14
Insertion and extraction
of wired contacts
disposable plastic tool :
•colored tip for insertion
•white tip for extraction
Extraction
of unwired contacts
Filler plug
these filler plugs are installed at the rear
of unwired contacts to maintain connector
sealing
Reusable fixing plate
Two, three or four holes self locking fixing
plates, see page 126.
contact sizes part numbers colour
20 (M 81969-14-11) 8522-20 red
16 (M 81969-14-03) 8522-16 blue
12 (M 81969-14-04) 8522-12 yellow
contact sizes part numbers
20 8522-56
16 8522-57
12 8522-58
contact sizes part numbers colour
20 8522-389 A*/MS 27488-20 red
16 8522-390 A/MS 27488-16 blue
12 8522-391 A/MS 27488-12 yellow
* for class 200°C only
Protective caps Aluminum version
