MMIC Selection Guide The Ultimate in Performance MMICs DC-65GHz Broadband Amplifiers & Modules Low-Noise Amplifiers Prescalers & Frequency Detectors Switches Attenuators MMIC Selection Guide Microsemi's portfolio of MMIC products targets a broad range of applications including those in electronic warfare, radars, instrumentation (test and measurement) and microwave communications. The portfolio comprises broadband amplifiers (both power and low-noise), amplifier modules, prescalers, attenuators and switches spanning DC to 65GHz based on high-performance process technologies. Microsemi offers a large number of distributed amplifier products including industry-leading MMICs. Microsemi's prescalers combine higher frequency operation, the flexibility to divide by a large number of ratios and very good residual phase noise. Broadband Amplifiers Frequency (GHz) P1dB (dBm) Gain (dB) OIP3 (dBm) NF (dB) Bias Package Part Number Distributed LNA DC-26 22.0 18.0 35.0 3.2 @ 13 GHz 7V, 150 mA Die MMA041AA NEW Distributed LNA DC-28 15.0 16.0 27.0 2.5 @ 10 GHz 8V, 60 mA Die MMA040AA NEW Wideband Amp DC-14 7.0-18.01 13.0 18.0-29.01 2.6 @ 10 GHz 4V, 15-80mA1 Die MMA015AA NEW Wideband Amp DC-16 7.0-18.01 14.0 18.0-29.01 2.6 @ 10 GHz 4V, 15-80mA1 Die MMA016AA NEW Wideband LNA DC-30 14.0-17.0 17.0 - - 5V, 150mA Die MMA022AA Wideband Amp DC-30 18.0-24.0 17.0 - 3.0 @ 10 GHz 8V, 250mA Die MMA023AA Wideband Amp DC-30 21.0 10.0 - 5.5 @ 20 GHz 8V, 250mA Die MMA024AA Wideband LNA DC-30 14.0-17.0 17.0 - 1.9 @ 15 GHz 5V, 150mA Die MMA025AA Wideband LNA DC-30 18.0-20.0 10.5 - 4.5 @ 20 GHz 7V, 150mA Die MMA026AA Wideband Amp DC-30 14.0 11.0 - 2.5 @ 20 GHz 4.5V, 85mA Die MMA027AA Wideband Amp DC-35 15.0-19.0 19.0 - - 5V, 180mA 7x7 QFN2 UAS3LK Wideband Amp DC-45 15.0-21.0 11.0 - 4.5 @ 20 GHz 7V, 150mA Die MMA029AA Wideband LNA DC-45 11.5-14.0 11.5 - 2.5 @ 20 GHz 4.5V, 85mA Die MMA030AA Wideband Amp DC-45 21.0 10.0 - 5.5 @ 20 GHz 8V, 250mA Die MMA031AA Wideband Amp DC-45 17.0-21.0 10.5 - 5.5 @ 20 GHz 8V, 250mA Die MMA032AA Wideband Amp DC-45 13.0-15.5 11.0 - 3.0 @ 20 GHz 7V, 85mA Die MMA033AA Wideband Amp DC-65 17.0-21.0 10.5 - 5.5 @ 20 GHz 8V, 250mA Die MMA034AA Wideband Amp DC-65 15.0-21.0 11.0 - 4.5 @ 20 GHz 7V, 150mA Die MMA035AA Wideband LNA DC-65 11.0-14.0 11.0 - 2.3 @ 20 GHz 4.5V, 85mA Die MMA036AA Wideband LNA 0.5-12 17.0 16.5 29.0 1.4 @ 7 GHz 5V, 55 mA Die MMA043AA Wideband Amp 2-16 5.5-18.51 11.5 13.5-26.51 - 4V, 23-95mA1 Die MMA017AA Wideband Amp 5-18 17.5 13.0 - 6.5 @ 10 GHz 5V, 130mA 3x3 QFN UA5M15MP Wideband LNA 6-18 17.0 21.0 30.0 1.7@ 12 GHz 4V, 102 mA Die MMA044AA Wideband Amp 5-20 17.5 15.5 - 5.5 @ 10 GHz 5V, 135mA Die MMA021AA Function 1 2 Power can be selected by choosing on-chip source resistor. Hermetic package NEW NEW Prescalers & Frequency Detectors Frequency (GHz) Function Pout (dBm) 10kHz SSB Noise (dBc/Hz) Pdiss (W) Package Part Number DC-9 /8 to /511, Programmable Integer Divider +4 -147 1.10 6x6 QFN UXN6M9M DC-14 /8 to /511, all integers +4 -147 1.10 6x6 QFN UXN14M9P DC-15 /1 to /(232-1) +4 -150 0.30-0.80 4x4 Ceramic UXN14M32K DC-15 /2/4/8 or /4/5/6/7/8/9 +5 -153 0.60 4x4 QFN UXM15P DC-20 /2/4/8 +5 -153 0.50 4x4 QFN UXC20P DC-20 /1/2/4/8 +5 -153 0.43 4x4 QFN UXD20P DC-26.5 /1/2/4/8 +5 -153 0.43 4x4 Ceramic UXD20K 0.05-15 /2 to /220 -4 -153 1.40 6x6 QFN MX1DS10P 0.5-40 /1 to /127 Programmable, all integers +2 -153 0.75 4x4 Ceramic UXN40M7K DC-40 8GHz Phase Frequency Detector w/Dual 40GHz Prescalers 0.4Vp-p -153 1.32 6x6 Ceramic PFD1K NEW Switches Frequency (GHz) Insertion Loss (dB) Isolation (dB) Input P1dB (dBm) Control Voltage Package SP4T Non-Reflective DC-8 1.6 45 28 0/-5V Die MMS008AA NEW SP2T Non-Reflective DC-20 2 40 24 0/-5V Die MMS006AA NEW Frequency (GHz) Insertion Loss (dB) Dynamic Range (dB) Return Loss (dB) Input P1dB (dBm) Package Analog VVA DC-40 <3 17 >8 >8 Die MMS005AA Analog VVA DC-50 <5 27 >12 >3 Die MMS004AA Function Part Number Voltage Variable Attenuators Function Part Number The Ultimate in Performance MMICs UXN14M32K UXD20K /1 to /(232-1) DC-15 GHz Prescaler /1/2/4/8 DC-26.5 GHz Prescaler Phase Noise 8 GHz Input -60 Divide-by-8 Divide-by-10 -70 -80 SSB Phase Noise (dBc/Hz) -90 -100 -110 -120 -130 -140 -150 -160 100 1k 10k 100k Offset Frequency (Hz) UA0L65VM MMS004AA DC-65 GHz Wideband Amplifier Module DC-50 GHz Voltage Variable Attenuator The Ultimate in Performance MMICs MMA025AA UA2V50HM DC-30 GHz Wideband LNA 2-50 GHz High Gain Power Amplifier Module MMA029AA MMA036AA DC-45 GHz 11dB Gain Wideband Amplifier DC-65 GHz 11dB Gain Wideband Amplifier MMIC Selection Guide Wideband Amplifier Modules 1 Frequency (GHz) Psat (dBm) Gain (dB) Flatness (dB) NF (dB) Bias Connector1 Part Number 0.0001-30 23 33 2 4.5 @ 15 GHz 7V, 475mA 2.92 mm "K" UA0L30VM 0.0001-65 22 23-35 - 5.2 @ 30 GHz 7V, 475mA 2.4 mm UA0L65VM 0.01-50 22-30 25 3 10.0 @ 30 GHz 7V, 1800mA 2.4 mm UA0U50HM 2-50 22-30 23-30 4 10.5 @ 30 GHz 7V, 1800mA 2.4 mm UA2V50HM 2-50 22-30 18 4.5 - 6V, 1600mA 2.4 mm UA2V50LM Contact sales for additional connector options and bias board information. UA0L30VM UA0U50HM Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com (c)2016 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. UA0L65VM UA2V50HM UA2V50LM Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com. Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer's responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. MMIC 10/16