The Ultimate in Performance MMICs
MMIC Selection Guide
DC-65GHz
Broadband Ampliers & Modules
Low-Noise Ampliers
Prescalers & Frequency Detectors
Switches
Attenuators
Function Frequency
(GHz)
P1dB
(dBm)
Gain
(dB)
OIP3
(dBm)
NF
(dB) Bias Package Part
Number
Distributed LNA DC-26 22.0 18.0 35.0 3.2 @ 13 GHz 7V, 150 mA Die MMA041AA
Distributed LNA DC-28 15.0 16.0 27.0 2.5 @ 10 GHz 8V, 60 mA Die MMA040AA
Wideband Amp DC-14 7.0-18.0113.0 18.0-29.012.6 @ 10 GHz 4V, 15-80mA1Die MMA015AA
Wideband Amp DC-16 7.0-18.0114.0 18.0-29.012.6 @ 10 GHz 4V, 15-80mA1Die MMA016AA
Wideband LNA DC-30 14.0-17.0 17.0 - - 5V, 150mA Die MMA022AA
Wideband Amp DC-30 18.0-24.0 17.0 - 3.0 @ 10 GHz 8V, 250mA Die MMA023AA
Wideband Amp DC-30 21.0 10.0 - 5.5 @ 20 GHz 8V, 250mA Die MMA024AA
Wideband LNA DC-30 14.0-17.0 17.0 - 1.9 @ 15 GHz 5V, 150mA Die MMA025AA
Wideband LNA DC-30 18.0-20.0 10.5 - 4.5 @ 20 GHz 7V, 150mA Die MMA026AA
Wideband Amp DC-30 14.0 11.0 - 2.5 @ 20 GHz 4.5V, 85mA Die MMA027AA
Wideband Amp DC-35 15.0-19.0 19.0 - - 5V, 180mA 7x7 QFN2UAS3LK
Wideband Amp DC-45 15.0-21.0 11.0 - 4.5 @ 20 GHz 7V, 150mA Die MMA029AA
Wideband LNA DC-45 11.5-14.0 11.5 - 2.5 @ 20 GHz 4.5V, 85mA Die MMA030AA
Wideband Amp DC-45 21.0 10.0 - 5.5 @ 20 GHz 8V, 250mA Die MMA031AA
Wideband Amp DC-45 17.0-21.0 10.5 - 5.5 @ 20 GHz 8V, 250mA Die MMA032AA
Wideband Amp DC-45 13.0-15.5 11.0 - 3.0 @ 20 GHz 7V, 85mA Die MMA033AA
Wideband Amp DC-65 17.0-21.0 10.5 - 5.5 @ 20 GHz 8V, 250mA Die MMA034AA
Wideband Amp DC-65 15.0-21.0 11.0 - 4.5 @ 20 GHz 7V, 150mA Die MMA035AA
Wideband LNA DC-65 11.0-14.0 11.0 - 2.3 @ 20 GHz 4.5V, 85mA Die MMA036AA
Wideband LNA 0.5-12 17.0 16.5 29.0 1.4 @ 7 GHz 5V, 55 mA Die MMA043AA
Wideband Amp 2-16 5.5-18.5111.5 13.5-26.51- 4V, 23-95mA1Die MMA017AA
Wideband Amp 5-18 17.5 13.0 - 6.5 @ 10 GHz 5V, 130mA 3x3 QFN UA5M15MP
Wideband LNA 6-18 17.0 21.0 30.0 1.7@ 12 GHz 4V, 102 mA Die MMA044AA
Wideband Amp 5-20 17.5 15.5 - 5.5 @ 10 GHz 5V, 135mA Die MMA021AA
1 Power can be selected by choosing on-chip source resistor.
2 Hermetic package
NEW
NEW
NEW
NEW
NEW
NEW
MMIC Selection Guide
Broadband Amplifiers
Microsemi’s portfolio of MMIC products targets a broad range of applications including those in electronic warfare, radars,
instrumentation (test and measurement) and microwave communications. The portfolio comprises broadband amplifiers (both power
and low-noise), amplifier modules, prescalers, attenuators and switches spanning DC to 65GHz based on high-performance process
technologies. Microsemi offers a large number of distributed amplifier products including industry-leading MMICs. Microsemi’s
prescalers combine higher frequency operation, the flexibility to divide by a large number of ratios and very good residual phase noise.
Frequency
(GHz) Function Pout
(dBm)
10kHz SSB Noise
(dBc/Hz) Pdiss (W) Package Part Number
DC-9 /8 to /511, Programmable Integer Divider +4 -147 1.10 6x6 QFN UXN6M9M
DC-14 /8 to /511, all integers +4 -147 1.10 6x6 QFN UXN14M9P
DC-15 /1 to /(232-1) +4 -150 0.30-0.80 4x4 Ceramic UXN14M32K
DC-15 /2/4/8 or /4/5/6/7/8/9 +5 -153 0.60 4x4 QFN UXM15P
DC-20 /2/4/8 +5 -153 0.50 4x4 QFN UXC20P
DC-20 /1/2/4/8 +5 -153 0.43 4x4 QFN UXD20P
DC-26.5 /1/2/4/8 +5 -153 0.43 4x4 Ceramic UXD20K
0.05-15 /2 to /220 -4 -153 1.40 6x6 QFN MX1DS10P
0.5-40 /1 to /127 Programmable, all integers +2 -153 0.75 4x4 Ceramic UXN40M7K
DC-40 8GHz Phase Frequency Detector w/Dual 40GHz
Prescalers 0.4Vp-p -153 1.32 6x6 Ceramic PFD1K
Function Frequency
(GHz)
Insertion Loss
(dB)
Isolation
(dB)
Input P1dB
(dBm) Control Voltage Package Part Number
SP4T Non-Reflective DC-8 1.6 45 28 0/-5V Die MMS008AA
SP2T Non-Reflective DC-20 2 40 24 0/-5V Die MMS006AA
NEW
NEW
NEW
Prescalers & Frequency Detectors
Switches
Function Frequency
(GHz)
Insertion Loss
(dB)
Dynamic Range
(dB)
Return Loss
(dB)
Input P1dB
(dBm) Package Part Number
Analog VVA DC-40 <3 17 >8 >8 Die MMS005AA
Analog VVA DC-50 <5 27 >12 >3 Die MMS004AA
Voltage Variable Attenuators
-160
-150
-140
-130
-120
-110
-100
-90
-80
-70
-60
100 1k 10k
100k
SSB Phase Noise (dBc/Hz)
Offset Frequency (Hz)
Phase Noise 8 GHz Input
Divide-by-8
Divide-by-10
The Ultimate in Performance MMICs
UXN14M32K
/1 to /(232-1) DC-15 GHz
Prescaler
UA0L65VM
DC-65 GHz Wideband
Amplifier Module
UXD20K
/1/2/4/8 DC-26.5 GHz
Prescaler
MMS004AA
DC-50 GHz Voltage
Variable Attenuator
MMA025AA
DC-30 GHz
Wideband LNA
MMA029AA
DC-45 GHz 11dB Gain
Wideband Amplifier
UA2V50HM
2-50 GHz High Gain
Power Amplifier Module
MMA036AA
DC-65 GHz 11dB Gain
Wideband Amplifier
The Ultimate in Performance MMICs
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace
&
defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened
analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization
devices and precise time solutions, setting the world’s standard for time; voice processing devices; RF solutions; discrete
components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products;
Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is
headquartered in Aliso Viejo, California and has approximately 4,800 employees globally. Learn more at www.microsemi.com.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
©
2016 Microsemi Corporation. All rights reserved.
Microsemi and the Microsemi logo are registered
trademarks of Microsemi Corporation. All other
trademarks and service marks are the property
of their respective owners.
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular
purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other
products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance
specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and
together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s
responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is,
where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party
any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this
document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at
any time without notice.
MMIC 10/16
Frequency
(GHz)
Psat
(dBm)
Gain
(dB) Flatness (dB) NF
(dB) Bias Connector1Part Number
0.0001-30 23 33 ±2 4.5 @ 15 GHz 7V, 475mA 2.92 mm "K" UA0L30VM
0.0001-65 22 23-35 - 5.2 @ 30 GHz 7V, 475mA 2.4 mm UA0L65VM
0.01-50 22-30 25 ±3 10.0 @ 30 GHz 7V, 1800mA 2.4 mm UA0U50HM
2-50 22-30 23-30 ±4 10.5 @ 30 GHz 7V, 1800mA 2.4 mm UA2V50HM
2-50 22-30 18 ±4.5 - 6V, 1600mA 2.4 mm UA2V50LM
MMIC Selection Guide
Wideband Amplifier Modules
1 Contact sales for additional connector options and bias board information.
UA0L30VM UA0L65VM
UA2V50HMUA0U50HM UA2V50LM
