4
SCD8521 Rev B 5/17/11 Aeroflex Plainview
Positive Input
Leakage Current
(CH0-CH15) +ISOFFOUTPUT(ALL)VIN = +10V, VEN = 4V, output and all unused MUX inputs
under test = -10V 2/, 3/-100 +700 nA
Negative Input
Leakage Current
(CH0-CH15) -ISOFFOUTPUT(ALL)VIN = -10V, VEN = 4V, output and all unused MUX inputs
under test = +10V 2/, 3/-100 +700 nA
Positive Output
Leakage Current
OUTPUTS (pins 12,45) +IDOFFOUTPUT(ALL)VOUT = +10V, VEN = 4V, output and all unused MUX
inputs under test = -10V 3/, 4/-100 +100 nA
Negative Output
Leakage Current
OUTPUTS (pins 12,45) -IDOFFOUTPUT(ALL)VOUT = -10V, V EN = 4V, output and all unused MUX inputs
under test = +10V 3/, 4/-100 +100 nA
Input Clamped Voltage
(CH0-CH15) +VCLMP VEN = 4V, all unused MUX inputs under test
are open. 3/
+25°C
+125°C
-55°C
18.0
18.0
17.5
23.0
23.5
22.5
V
V
V
Input Clamped Voltage
(CH0-CH15) -VCLMP +25°C
+125°C
-55°C
-23.0
-23.5
-22.5
-18.0
-18.0
-17.5
V
V
V
Switch ON Resistance
OUTPUTS (pins 12,45)
RDS(ON)(0-15)AVIN = +15V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/ 500 3000
RDS(ON)(0-15)BVIN = +5V, VEN = 0.8V, IOUT = -1mA 2/, 3/, 5/ 500 3000
RDS(ON)(0-15)CVIN = -5V, VEN = 0.8V, IOUT = +1mA 2/, 3/, 5/ 500 3000
Notes:
1/ Measure inputs sequentially. Ground all unused inputs of the device under test. VA is the applied input voltage to the address lines A(0-3).
2/ VIN is the applied input voltage to the input channels (CH0-CH15).
3/ VEN is the applied input voltage to the enable line EN(0-15).
4/ VOUT is the applied input voltage to the output lines OUTPUT ( 0-15), CURRENT (0-15)
5/ Negative current is the current flowing out of each of the MUX pins. Positive current is the current flowing into each MUX pin.
6/ Not tested, guaranteed to the specified limits.
SWITCHING CHARACTERISTICS
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V -- UNLESS OTHERWISE SPECIFIED)
Parameter Symbol Conditions Min Max Units
Switching Test MUX
tAHL RL = 10KCL = 50pF 10 1500 ns
tALH RL = 10KCL = 50pF
Tc = +25°C, +125°C
Tc = -55°C 10
10 2000
5000 ns
ns
tONEN RL = 1KCL = 50pF 10 1500 ns
tOFFEN 10 1000 ns
DC ELECTRICAL PERFORMANCE CHARACTERISTICS 1/ (continued)
(TC = -55°C TO +125°C, +VEE = +15V, -VEE = -15V, VREF = +5.0V -- UNLESS OTHERWISE SPECIFIED)
Parameter Symbol Conditions Min Max Units