SN74LVC2G07DCKRE4 - Texas Instruments

GND

VCC

GND

VCC

DRY PACKAGE

(TOP VIEW)

DSF PACKAGE

(TOP VIEW)

GND

VCC

YZP PACKAGE

(BOTTOM VIEW)

GND

VCC

DCK PACKAGE

(TOP VIEW)

VCC

DBV PACKAGE

(TOP VIEW)

SN74LVC2G07

www.ti.com

SCES308J –AUGUST 2001–REVISED AUGUST 2012

DUAL BUFFER/DRIVER WITH OPEN DRAIN OUTPUTS

Check for Samples: SN74LVC2G07

1FEATURES

2• Available in the Texas Instruments NanoFree™ • Typical VOHV (Output VOH Undershoot)

Package >2 V at VCC = 3.3 V, TA= 25°C

• Supports 5-V VCC Operation • Ioff Supports Partial-Power-Down Mode

Operation

• Inputs and Open-Drain Outputs Accept

Voltages up to 5.5 V • Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• Max tpd of 3.7 ns at 3.3 V • ESD Protection Exceeds JESD 22

• Low Power Consumption, 10-μA Max ICC – 2000-V Human-Body Model (A114-A)

• ±24-mA Output Drive at 3.3 V – 200-V Machine Model (A115-A)

• Typical VOLP (Output Ground Bounce)

<0.8 V at VCC = 3.3 V, TA= 25°C – 1000-V Charged-Device Model (C101)

DESCRIPTION/ORDERING INFORMATION

This dual buffer/driver is designed for 1.65-V to 5.5-V VCC operation. The output of the SN74LVC2G07 is open

drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-

AND functions. The maximum sink current is 32 mA.

NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the

package.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

1A 1Y

1 6

2A 2Y

3 4

SN74LVC2G07

SCES308J –AUGUST 2001–REVISED AUGUST 2012

www.ti.com

ORDERING INFORMATION

TAPACKAGE(1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING(3)

NanoFree™ – WCSP (DSBGA) Reel of 3000 SN74LVC2G07YZPR _ _ _CV_

0.23-mm Large Bump – YZP (Pb-free)

SOT (SOT-23) – DBV Reel of 3000 SN74LVC2G07DBVR C07_

QFN - DRY (4) Reel of 5000 SN74LVC2G07DRYR CV

–40°C to 85°C

μQFN - DSF(4) Reel of 5000 SN74LVC2G07DSFR CV

Reel of 3000 SN74LVC2G07DCKR

SOT (SC-70) – DCK CV_

Reel of 250 SN74LVC2G07DCKT

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(3) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.

YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following

character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).

(4) ESD protection exceeds 150-V machine model.

FUNCTION TABLE

(EACH BUFFER/DRIVER)

INPUT OUTPUT

A Y

L L

H Z

LOGIC DIAGRAM (POSITIVE LOGIC)

Product Folder Links: SN74LVC2G07

SN74LVC2G07

www.ti.com

SCES308J –AUGUST 2001–REVISED AUGUST 2012

ABSOLUTE MAXIMUM RATINGS(1)

over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT

VCC Supply voltage range –0.5 6.5 V

VIInput voltage range(2) –0.5 6.5 V

VOVoltage range applied to any output in the high-impedance or power-off state(2) –0.5 6.5 V

VOVoltage range applied to any output in the high or low state(2) (3) –0.5 6.5 V

IIK Input clamp current VI< 0 –50 mA

IOK Output clamp current VO< 0 –50 mA

IOContinuous output current ±50 mA

Continuous current through VCC or GND ±100 mA

DBV package 165

DCK package 259

θJA Package thermal impedance(4) YZP package 123 °C/W

DRY package 234

DSF package 300

Tstg Storage temperature range –65 150 °C

(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The value of VCC is provided in the recommended operating conditions table.

(4) The package thermal impedance is calculated in accordance with JESD 51-7.

RECOMMENDED OPERATING CONDITIONS(1)

MIN MAX UNIT

Operating 1.65 5.5

VCC Supply voltage V

Data retention only 1.5

VCC = 1.65 V to 1.95 V 0.65 × VCC

VCC = 2.3 V to 2.7 V 1.7

VIH High-level input voltage V

VCC = 3 V to 3.6 V 2

VCC = 4.5 V to 5.5 V 0.7 × VCC

VCC = 1.65 V to 1.95 V 0.35 × VCC

VCC = 2.3 V to 2.7 V 0.7

VIL Low-level input voltage V

VCC = 3 V to 3.6 V 0.8

VCC = 4.5 V to 5.5 V 0.3 × VCC

VIInput voltage 0 5.5 V

VOOutput voltage 0 5.5 V

VCC = 1.65 V 4

VCC = 2.3 V 8

IOL Low-level output current 16 mA

VCC = 3 V 24

VCC = 4.5 V 32

VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V 20

Δt/Δv Input transition rise or fall rate VCC = 3.3 V ± 0.3 V 10 ns/V

VCC = 5 V ± 0.5 V 5

TAOperating free-air temperature –40 85 °C

(1) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,

Implications of Slow or Floating CMOS Inputs, literature number SCBA004.

Product Folder Links: SN74LVC2G07

SN74LVC2G07

SCES308J –AUGUST 2001–REVISED AUGUST 2012

www.ti.com

ELECTRICAL CHARACTERISTICS

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER TEST CONDITIONS VCC MIN TYP(1) MAX UNIT

IOL = 100 μA 1.65 V to 5.5 V 0.1

IOL = 4 mA 1.65 V 0.45

IOL = 8 mA 2.3 V 0.3

VOL V

IOL = 16 mA 0.4

3 V

IOL = 24 mA 0.55

IOL = 32 mA 4.5 V 0.55

IIA inputs VI= 5.5 V or GND 0 to 5.5 V ±5 μA

Ioff VIor VO= 5.5 V 0 ±10 μA

ICC VI= 5.5 V or GND, IO= 0 1.65 V to 5.5 V 10 μA

ΔICC One input at VCC – 0.6 V, Other inputs at VCC or GND 3 V to 5.5 V 500 μA

CIVI= VCC or GND 3.3 V 3.5 pF

(1) All typical values are at VCC = 3.3 V, TA= 25°C.

SWITCHING CHARACTERISTICS

over recommended operating free-air temperature range (unless otherwise noted) (see Figure 1)

VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V

FROM TO ± 0.15 V ± 0.2 V ± 0.3 V ± 0.5 V

PARAMETER UNIT

(INPUT) (OUTPUT) MIN MAX MIN MAX MIN MAX MIN MAX

tpd A Y 1.5 8.6 1 4.4 1 3.7 1 2.9 ns

OPERATING CHARACTERISTICS

TA= 25°C VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V VCC = 5 V

PARAMETER TEST CONDITIONS UNIT

TYP TYP TYP TYP

Cpd Power dissipation capacitance f = 10 MHz 3 3 4 4 pF

Product Folder Links: SN74LVC2G07

tsu

From Output

UnderTestC

(see Note A)

LOAD CIRCUIT

S1 VLOAD

Open

GND

Data Input

Timing Input 0V

Input

Output

Waveform 1

S1 atV

(see Note B)

LOAD

Output

Waveform 2

S1 at GND

(see Note B)

VOL

VOH

≈0V

Output

TEST S1

Output

Control

VMVM

1.8V 0.15 V±

2.5V 0.2 V±

3.3V 0.3 V±

5V 0.5 V±

1 kΩ

500 Ω

VCC RL

2 ×VCC

VLOAD CL

30 pF

50 pF

0.15V

0.3V

V∆

VCC/2

1.5V

VCC/2

≤2 ns

≤2.5 ns

INPUTS

t/t

r f

VCC

t (see Notes E and F)

PZL VLOAD

VOLTAGE WAVEFORMS

ENABLE AND DISABLETIMES

LOW- AND HIGH-LEVEL ENABLING

VOLTAGE WAVEFORMS

PROPAGATION DELAYTIMES

INVERTING AND NONINVERTING OUTPUTS

NOTES: A. C includes probe and jig capacitance.

B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.

Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.

C. All input pulses are supplied by generators have the following characteristics: PRR 10 MHz, Z = 50 .

D. The outputs are measured one at a time, with one transition per measurement.

≤ Ω

E. Because this device has open-drain outputs, t and t are the same as t .

F. t is measured at V .

G. t is measured atV + V .

H. All parameters and waveforms are not applicable to all devices.

PLZ PZL PD

PZL M

PLZ OL ∆

VOLTAGE WAVEFORMS

PULSE DURATION VOLTAGE WAVEFORMS

SETUP AND HOLDTIMES

V /2

LOAD

tPZL tPLZ

tPHZ

tPZH

V –V

OH ∆

V +V

OL ∆

VMVM

VOL

VOH

VOL

tPLH tPHL

tPLH

tPHL

t (see Notes E and G)

PLZ VLOAD

t /t

PHZ PZH VLOAD

SN74LVC2G07

www.ti.com

SCES308J –AUGUST 2001–REVISED AUGUST 2012

PARAMETER MEASUREMENT INFORMATION

(OPEN DRAIN)

Figure 1. Load Circuit and Voltage Waveforms

Product Folder Links: SN74LVC2G07

SN74LVC2G07

SCES308J –AUGUST 2001–REVISED AUGUST 2012

www.ti.com

REVISION HISTORY

Changes from Revision H (June 2008) to Revision I Page

• Added new orderable parts, DRY and DSF. ......................................................................................................................... 2

Changes from Revision I (July 2012) to Revision J Page

• Updated pin out packages. ................................................................................................................................................... 1

Product Folder Links: SN74LVC2G07

PACKAGE OPTION ADDENDUM

www.ti.com 16-Aug-2012

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

SN74LVC2G07DBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS