MSP Vishay Dale Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile FEATURES * 0.195" [4.95 mm] "A" or 0.350" [8.89 mm] "C" maximum seated height * Thick film resisitive elements * Low temperature coefficient (- 55 C to + 125 C) 100 ppm/C * Rugged, molded case construction * Reduces total assembly costs * Compatible with automatic insertion equipment and reduces PC board space * Wide resistance range (10 to 2.2 M) * Available in tube pack or side-by-side pack * Lead (Pb)-free version is RoHS compliant Available e1 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL/ SCHEMATIC PROFILE RESISTOR RESISTANCE POWER RATING RANGE Max. AT 70 C W MSPxxx01 A C 0.20 0.25 MSPxxx03 A C 0.30 0.40 A 0.20 C 0.25 * Tighter tracking available ** Tolerances in brackets available on request MSPxxx05 STANDARD TOLERANCE TEMPERATURE TCR COEFFICIENT TRACKING* (- 55 C to + 125 C) (- 55 C to + 125 C) ppm/C ppm/C % OPERATING VOLTAGE Max. VDC 10 - 2.2M 2 Standard (1, 5)** 100 50 ppm/C 100 10 - 2.2M 2 Standard (1, 5)** 100 50 ppm/C 100 10 - 2.2M 2 Standard ( 5 %)** 100 150 ppm/C 100 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format) M GLOBAL MODEL MSP S P 0 6 A 0 3 1 K 0 0 G D PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE TOLERANCE VALUE CODE 06 = 6 Pin A = "A" Profile 01 = Bussed R = Decimal F=1% 08 = 8 Pin C = "C" Profile 03 =Isolated K = Thousand G=2% 09 = 9 Pin 00 = Special M = Million J=5% 10 = 10 Pin 10R0 = 10 S = Special 680K = 680 k 1M00 = 1.0 M Historical Part Number example: MSP06A03102G (will continue to be accepted) MSP HISTORICAL MODEL 06 A PIN COUNT PACKAGE HEIGHT A PACKAGING SPECIAL EJ = Lead (Pb)-free, Tube DA = Tin/Lead, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable 03 102 G DO3 SCHEMATIC RESISTANCE VALUE TOLERANCE CODE PACKAGING New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format) M GLOBAL MODEL MSP S P 0 8 C 0 5 1 3 1 A G D PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE TOLERANCE VALUE CODE 06 = 6 Pin A = "A" Profile 05 = Dual 3 digit F=1% 08 = 8 Pin C = "C" Profile Terminator Impedence code, G=2% 09 = 9 Pin followed by J=5% 10 = 10 Pin Alpha modifier (see Impedence codes table) Historical Part Number example: MSP08C05221331G (will continue to be accepted) MSP HISTORICAL MODEL 08 C PIN COUNT PACKAGE HEIGHT A SPECIAL PACKAGING EJ = Lead (Pb)-free, Tube DA = Tin/Lead, Tube Blank = Standard (Dash Number) (up to 3 digits) From 1-999 as applicable 05 221 331 G DO3 SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 1 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510 Revision: 28-Jul-06 MSP Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile Vishay Dale DIMENSIONS in inches [millimeters] 0.090 [2.29] Max. A Max. 0.015 [0.381] Min. PIN #1 0.040 0.010 [1.02 0.254] 0.100 0.010 [2.54 0.254] Non-Accumulative D Max. 0.016 0.003 [0.406 0.076] B C Equal Space GLOBAL MODEL 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] 0.012 0.003 [0.305 0.076] A (Max.) B C MSP06 0.590 [14.99] 0.500 [12.70] 5 MSP08 0.790 [20.07] 0.700 [17.78] 7 MSP10 0.990 [25.15] 0.900 [22.86] 9 MSP09 0.890 [22.61] 0.800 [20.32] 8 D (Max.) MSPxxA = 0.195 [4.95] MSPxxC = 0.350 [8.89] 0.195 [4.95] ONLY TECCHNICAL SPECIFICATIONS PARAMETER UNIT MSP SERIES Package Power Rating Maximum at + 25 C and + 70 C See Derating Curves Voltage Coefficient of Resistance Veff Dielectric Strength VAC 200 > 100M Isolation Resistance (03 Schematic) < 50 ppm typical Operating Temperature Range C - 55 to + 125 Storage Temperature Range C - 55 to + 150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215 Solderability: Per MIL-STD-202, Method 208E, RMA flux Body: Molded epoxy Terminals: Copper alloy, solder plated Weight: MSP06A = 0.4 gram MSP08A = 0.5 gram MSP09A = 0.55 gram MSP10A = 0.6 gram Document Number: 31510 Revision: 28-Jul-06 For technical questions, contact: ff2aresistors@vishay.com MSP06C = 0.7 gram MSP08C = 0.9 gram MSP10C = 1.1 gram www.vishay.com 2 MSP Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile Vishay Dale IMPEDANCE CODES CODE R1() R2() CODE R1() R2() 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K CIRCUIT APPLICATIONS 01 Schematic 5, 7, 8* or 9 resistors with one pin common 1 2 3 n-1 The MSPxxx01 circuit contains 5, 7, 8* or 9 nominally equal resistors, each connected between a common pin (Pin No. 1) and a discrete PC board pin. Commonly used in the following applications: * "Wired OR" Pull-up * MOS/ROM Pull-up/Pull-down * Power Gate Pull-up * Open Collector Pull-up * TTL Input Pull-down * TTL Unused Gate Pull-up * Available in "A" Profile only n Standard E-24 resistance values stocked. Consult factory. 03 Schematic 3, 4 or 5 isolated resistors The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal value in a compact package. Each resistor is connected to two discrete PC pins. Standard E-24 resistance values stocked. Consult factory. 1 2 3 4 n-1 n 05 Schematic Pulse squaring and TTL dual-line terminators The MSPxxx05 circuits contain 4, 6, 7* or 8 series pair of resistors. Each series pair is connected between two common lines. The junction of these resistor pairs is connected to the input terminals. R2 R1 The 05 circuits are designed for TTL dual-line termination and pulse squaring. * Available in "A" Profile only Many dual terminator resistance values stocked. Consult factory. 1 www.vishay.com 3 2 3 n-1 n For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510 Revision: 28-Jul-06 MSP Thick Film Resistor Networks Single-In-Line, Molded SIP; 01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile and 6, 8 or 10 Pin "C" Profile 1.90 "C" Profile MSP10A Package 1.50 1.15 Power Rating (Watts) Power Rating (Watts) "A" Profile MSP08A Package MSP06A Package 3.00 MSP10C Package 2.50 MSP08C Package 2.00 1.50 0.45 MSP06C Package Single Resistor 03 0.30 0.60 01 and 05 - 50 Vishay Dale Single Resistor 03 0.38 + 25 Derating + 70 + 125 + 150 Ambient Temperature C "A" PROFILE + 70 C PACKAGE RATINGS 01 and 05 - 50 + 25 Derating + 70 + 125 + 150 Ambient Temperature C "C" PROFILE + 70 C PACKAGE RATINGS MSP10A 1.25 watts MSP10C 1.60 watts MSP09A 1.12 watts MSP08C 1.30 watts MSP08A 1.00 watts MSP06C 1.00 watts MSP06A 0.75 watts Higher power ratings available. Contact factory. PERFORMANCE MAX. R (Typical Test Lots) TEST CONDITIONS Power Conditioning 1.5 x rated power, applied 1.5 hours "ON" and 0.5 hour "OFF" for 100 hrs. 4 hrs. at + 25 C ambient temperature 0.50 % R Thermal Shock 5 cycles between - 65 C and + 125 C 0.50 % R Short Time Overload 2.5 x rated working voltage 5 seconds 0.25 % R Low Temperature Operation 45 minutes at full rated working voltage at - 65 C 0.25 % R Moisture Resistance 240 hrs. with humidity ranging from 80 % RH to 98 % RH 0.50 % R Resistance to Soldering Heat Leads immersed in + 260 C solder to within 1/16" of device body for 10 seconds 0.25 % R Shock Total of 18 shocks at 100 G's 0.25 % R Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz 0.25 % R Load Life 1000 hrs. at + 70 C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period. Derated according to the curve. 1.00 % R Terminal Strength 4.5 pound pull for 30 seconds 0.25 % R Insulation Resistance 10 000 Megohm (minimum) Dielectric Withstanding Voltage Document Number: 31510 Revision: 28-Jul-06 - For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 4 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1