Thick Film Resistor Networks
Single-In-Line, Molded SIP; 01, 03, 05 Schematics
6, 8, 9 or 10 Pin “A” Profile and 6, 8 or 10 Pin “C” Profile
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510
1Revision: 28-Jul-06
MSP
Vishay Dale
FEATURES
•0.195" [4.95 mm] "A" or 0.350" [8.89 mm] "C"
maximum seated height
•Thick film resisitive elements
•
Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
•Rugged, molded case construction
•Reduces total assembly costs
•Compatible with automatic insertion equipment
and reduces PC board space
•Wide resistance range (10 Ω to 2.2 MΩ)
•Available in tube pack or side-by-side pack
•Lead (Pb)-free version is RoHS compliant
Available
RoHS*
COMPLIANT
e1
* Tighter tracking available
** Tolerances in brackets available on request
* Pb containing terminations are not RoHS compliant, exemptions may apply
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL/
SCHEMATIC
PROFILE RESISTOR
POWER RATING
Max. AT 70 °C
W
RESISTANCE
RANGE
Ω
STANDARD
TOLERANCE
%
TEMPERATURE
COEFFICIENT
(- 55 °C to + 125 °C)
ppm/°C
TCR
TRACKING*
(- 55 °C to + 125 °C)
ppm/°C
OPERATING
VOLTAGE
Max.
VDC
MSPxxx01 A
C
0.20
0.25 10 - 2.2M ± 2 Standard
(1, 5)** ± 100 ± 50 ppm/°C 100
MSPxxx03 A
C
0.30
0.40 10 - 2.2M ± 2 Standard
(1, 5)** ± 100 ± 50 ppm/°C 100
MSPxxx05 A
C
0.20
0.25 10 - 2.2M ± 2 Standard
(± 5 %)** ± 100 ± 150 ppm/°C 100
GLOBAL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE TOLERANCE SPECIAL
MODEL VALUE CODE
MSP 06 = 6 Pin A = “A” Profile 01 = Bussed R = Decimal F = ± 1 %Blank = Standard
08 = 8 Pin C = “C” Profile 03 =Isolated K = Thousand G = ± 2 %(Dash Number)
09 = 9 Pin 00 = Special M = Million J = ± 5 % (up to 3 digits)
10 = 10 Pin 10R0 = 10 Ω S = Special From 1-999
680K = 680 k Ω as applicable
1M00 = 1.0 M Ω
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MSP06A031K00GDA (preferred part numbering format)
Historical Part Number example: MSP06A03102G (will continue to be accepted)
HISTORICAL PIN COUNTPACKAGE SCHEMATIC RESISTANCE TOLERANCE PACKAGING
MODEL HEIGHT VALUE CODE
MSP06A031K00GDA
PACKAGING
EJ = Lead (Pb)-free,
Tube
DA = Tin/Lead, Tube
GLOBAL PIN COUNT PACKAGE HEIGHT SCHEMATIC RESISTANCE TOLERANCE SPECIAL
MODEL VALUE CODE
MSP 06 = 6 Pin A = “A” Profile 05 = Dual 3 digit F = ± 1 %Blank = Standard
08 = 8 Pin C = “C” Profile Terminator Impedence code, G = ± 2 %(Dash Number)
09 = 9 Pin followed byJ = ± 5 % (up to 3 digits)
10 = 10 Pin Alpha modifier From 1-999
(see Impedence as applicable
codes table)
New Global Part Numbering: MSP08C05131AGDA (preferred part numbering format)
Historical Part Number example: MSP08C05221331G (will continue to be accepted)
HISTORICAL PIN COUNTPACKAGE SCHEMATIC RESISTANCE RESISTANCE TOLERANCE PACKAGING
MODEL HEIGHT VALUE 1 VALUE 2
MS P 08C051 31AGDA
MSP 08C 05 221 331 G DO3
MSP 06 A 03 102 G DO3
PACKAGING
EJ = Lead (Pb)-free,
Tube
DA = Tin/Lead, Tube
Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 28-Jul-06 2
MSP
Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
Vishay Dale
DIMENSIONS in inches [millimeters]
A
Max.
D Max.
0.135 + 0.015
- 0.010
[3.43 + 0.381
- 0.254]
B
C Equal Space
0.016 ± 0.003
[0.406 ± 0.076]
0.100 ± 0.010
[2.54 ± 0.254]
Non-Accumulative
0.040 ± 0.010
[1.02 ± 0.254]
0.015
[0.381]
Min.
PIN #1
0.012 ± 0.003
[0.305 ± 0.076]
0.090 [2.29]
Max.
GLOBAL MODEL A (Max.) B C D (Max.)
MSP06 0.590 [14.99] 0.500 [12.70] 5 MSPxxA = 0.195 [4.95]
MSPxxC = 0.350 [8.89]
MSP08 0.790 [20.07] 0.700 [17.78] 7
MSP10 0.990 [25.15] 0.900 [22.86] 9
MSP09 0.890 [22.61] 0.800 [20.32] 8 0.195 [4.95] ONLY
TECCHNICAL SPECIFICATIONS
PARAMETER UNIT MSP SERIES
Package Power Rating
Maximum at + 25 °C and + 70 °C See Derating Curves
Voltage Coefficient of Resistance Veff < 50 ppm typical
Dielectric Strength VAC 200
Isolation Resistance (03 Schematic) Ω> 100M
Operating Temperature Range °C - 55 to + 125
Storage Temperature Range °C - 55 to + 150
MECHANICAL SPECIFICATIONS
Marking Resistance to Solvents: Permanency testing per MIL-STD-202, Method 215
Solderability: Per MIL-STD-202, Method 208E, RMA flux
Body: Molded epoxy
Terminals: Copper alloy, solder plated
Weight: MSP06A = 0.4 gram MSP06C = 0.7 gram
MSP08A = 0.5 gram MSP08C = 0.9 gram
MSP09A = 0.55 gram MSP10C = 1.1 gram
MSP10A = 0.6 gram
www.vishay.com For technical questions, contact: ff2aresistors@vishay.com Document Number: 31510
3Revision: 28-Jul-06
MSP
Vishay Dale Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
IMPEDANCE CODES
CODE R1(Ω) R2(Ω)CODE R1(Ω) R2(Ω)
500B 82 130 141A 270 270
750B 120 200 181A 330 390
800C 130 210 191A 330 470
990A 160 260 221B 330 680
101C 180 240 281B 560 560
111C 180 270 381B 560 1.2K
121B 180 390 501C 620 2.7K
121C 220 270 102A 1.5K 3.3K
131A 220 330 202B 3K 6.2K
CIRCUIT APPLICATIONS
01 Schematic 5, 7, 8* or 9 resistors with one pin common
The MSPxxx01 circuit contains 5, 7, 8* or 9 nominally equal resistors,
each connected between a common pin (Pin No. 1) and a discrete
PC board pin. Commonly used in the following applications:
• "Wired OR" Pull-up • MOS/ROM Pull-up/Pull-down
• Power Gate Pull-up • Open Collector Pull-up
• TTL Input Pull-down • TTL Unused Gate Pull-up
* Available in "A" Profile only
Standard E-24 resistance values stocked. Consult factory.
03 Schematic
3, 4 or 5 isolated resistors
The MSPxxx03 circuit contains 3, 4 or 5 resistors of nominally equal
value in a compact package. Each resistor is connected to two
discrete PC pins.
Standard E-24 resistance values stocked. Consult factory.
05 Schematic
Pulse squaring and TTL dual-line terminators
The MSPxxx05 circuits contain 4, 6, 7* or 8 series pair of resistors.
Each series pair is connected between two common lines. The
junction of these resistor pairs is connected to the input terminals.
The 05 circuits are designed for TTL dual-line termination and pulse
squaring.
* Available in "A" Profile only
Many dual terminator resistance values stocked. Consult factory.
1 2 3 n-1 n
1 2 3 4 n-1 n
1 2 3 n-1 n
R2
R1
MSP
Thick Film Resistor Networks Single-In-Line, Molded SIP;
01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile
and 6, 8 or 10 Pin "C" Profile
Vishay Dale
Document Number: 31510 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com
Revision: 28-Jul-06 4
Higher power ratings available. Contact factory.
Single Resistor
03
01 and 05
0.30
- 50 + 25 + 70 + 125 + 150
DeratingAmbient Temperature °C
Power Rating (Watts)
0.45
1.15
1.50
1.90
MSP06A Package
MSP08A Package
MSP10A Package
“A” Profile
Single Resistor
03
01 and 05
0.38
- 50 + 25 + 70 + 125 + 150
Derating Ambient Temperature °C
Power Rating (Watts)
0.60
1.50
2.00
2.50
MSP06C Package
MSP08C Package
MSP10C Package
“C” Profile
3.00
"A" PROFILE + 70 °C PACKAGE RATINGS
MSP10A 1.25 watts
MSP09A 1.12 watts
MSP08A 1.00 watts
MSP06A 0.75 watts
"C" PROFILE + 70 °C PACKAGE RATINGS
MSP10C 1.60 watts
MSP08C 1.30 watts
MSP06C 1.00 watts
PERFORMANCE
TEST CONDITIONS MAX. ΔR (Typical Test Lots)
Power Conditioning 1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hrs.
± 4 hrs. at + 25 °C ambient temperature ± 0.50 % ΔR
Thermal Shock 5 cycles between - 65 °C and + 125 °C ± 0.50 % ΔR
Short Time Overload 2.5 x rated working voltage 5 seconds ± 0.25 % ΔR
Low Temperature Operation 45 minutes at full rated working voltage at - 65 °C ± 0.25 % ΔR
Moisture Resistance 240 hrs. with humidity ranging from 80 % RH to 98 % RH ± 0.50 % ΔR
Resistance to Soldering Heat Leads immersed in + 260 °C solder to within 1/16" of device body for
10 seconds ± 0.25 % ΔR
Shock Total of 18 shocks at 100 G's ± 0.25 % ΔR
Vibration 12 hours at maximum of 20 G's between 10 and 2000 Hz ± 0.25 % ΔR
Load Life 1000 hrs. at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour
“OFF” for full 1000 hour period. Derated according to the curve. ± 1.00 % ΔR
Terminal Strength 4.5 pound pull for 30 seconds ± 0.25 % ΔR
Insulation Resistance 10 000 Megohm (minimum) -
Dielectric Withstanding Voltage -
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
