A-22 APEM www.apem.com
5000 series
Toggle switches
Distinctive features
A
THE WIDEST RANGE IN MINIATURE SWITCHES
❑❑ 17 actuators including toggles, paddle levers and locking levers
in different lengths.
❑❑ 5 contact materials from dry circuit to 6A 125VAC
and high inrush up to 120A 2 ms.
❑❑ 8 functions including maintained and momentary versions.
❑❑ 1 to 4 pole configurations.
❑❑ 12 terminal types including 9 for PC board mounting.
Other types include quick-connect and wire-wrap.
❑❑ 6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded.
❑❑ 3 types of finish including military black.
❑❑ 4 approvals (UL - CSA - VDE - CECC) and 3 listings.
❑❑ 4 types of sealing for terminal or front panel requirements.
❑❑ Numerous accessories available for actuator and bushing
options.
APEM www.apem.com A-23
5000 series
Toggle switches
Specifications
A
MATERIALS
• Case : diallylphthalate (DAP) or
high temperature plastic material
(UL94-V0)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : stainless steel or steel
tin plated
• Contacts
A: silver
AD : silver, gold plated
CD : brass, gold plated
X814 : for peak currrents, see
“Special options”.
• Terminal seal : epoxy
• Paddles : UL94HB polyamide
• Lever caps : vinyl
ELECTRICAL SPECIFICATIONS
• Current/voltage rating with resistive load :
Contact Maximum Minimum Level*
Silver (A) 3A 250VAC - 6A 125VAC - 4A 30VDC 50mA 10VDC III and IV
Silver, 3A 250VAC - 6A 125 VAC - 4A 30VDC 10mA 50mV I to IV
gold plated (AD) Gold plating withstands up to 100mA 30VDC 10µA 5V
Brass, 0,4 VA at 20VAC or DC 10mA 50mV I and II
gold plated (CD) 10µA 5V
• For inductive, lamp or capacitive load, consult factory. * For details, see Technical Information, end of catalogue.
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
1.500 Vrms 50 Hz min. between poles
1.500 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life at full load :
50.000 cycles for single and double pole
40.000 cycles for 3 pole
30.000 cycles for 4 pole
• Low level or mechanical life : 100.000 cycles
GENERAL SPECIFICATIONS
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
• Operating temperature : -40°C to +85°C
AGENCY APPROVALS/PREFERENTIAL LISTS
For VDE, refer to 55000 series.
QPL (Europe only)
MUAHAG
NATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriate
box of ordering format.
Preferential lists do not appear on the switches.
CECC 96201-007
EN 61058-1
A-24 APEM www.apem.com
5000 series
Toggle switches
Overview
A
5
SERIES
Terminals and bushing
0Straight PC terminals, 5,08 (.200) terminal
spacing, with Ø 6,35 (1/4) threaded
bushing
1Straight PC or quick-connect terminals,
4,70 (.185) terminal spacing, with Ø 6
(.236) threaded bushing.
2Straight PC terminals, 4,70 (.185) terminal
spacing, right angle, quick-connect or
wire wrap terminals, with 6,35 (1/4)
threaded bushing
3Straight PC terminals, 4 (.157) terminal
spacing, with Ø 6 (.236) threaded
bushing
4Straight PC terminals, 4 (.157) terminal
spacing or right angle terminals , with
Ø 6,35 (1/4) threaded bushing
5Solder lug terminals, with Ø 6 (.236)
threaded bushing.
6Solder lug terminals, with Ø 6,35 (1/4)
or Ø 11,9 (15/32) threaded bushing.
7Solder lug terminals, with Ø 6,35 (1/4)
flatted bushing.
9Straight PC or quick-connect terminals,
with Ø 6,35 (1/4) flatted bushing, 4,70
(.185) terminal spacing.
Number of poles
3Single pole
4Double pole
5Three pole
6Four pole
Electrical functions
6ON - ON
9ON OFF ON
7MOM OFF MOM
8ON OFF MOM
2ON - MOM
4ON ON ON
ON ON MOM ▲
MOM ON MOM ▲
Function 4
Must not have blank in
"connections" box.
. ▲Must not have blank in
"momentary" box.
Connections for
function 4
TH Standard
CT Reversed
See wiring diagrams end of
catalogue.
. For functions 4, 4-1R, 4-2R
(leave blank for all other
functions).
Momentary for
function 4
1R ON ON MOM
2R MOM ON MOM
Leave blank for other
functions.
Terminals
Blank Solder lugs or straight PC depending
on model
MSolder lugs with Ø 11,9 (15/32)
bushing (5600 switches)
MIWR Wire wrap (for 5200 switches only)
WRight angle, horizontal mounting
(5200 - 5400 switches)
WW Right angle, vertical mounting
(5200 - 5400 switches)
Y]
Y4 ] Bracket mounting (5200 switches)
Y6 ]
Y7 ]
ZQuick connect (5200 - 5100 - 5900
switches)
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches with threaded bushing
- model structure of switches with plain bushing
- options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
APEM www.apem.com A-25
5000 series
Toggle switches
Overview
A
Sealing boots are available. They are presented in section H.
Mounting accessories : standard hardware supplied with all models with Ø 6,35 (1/4) or Ø 6 (.236) threaded bushing :
2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher.
Standard and special hardware available are presented in section I.
Packaging unit : 25 pieces or 50 pieces depending on models.
Finish
Blank Bright chrome finish
GMatt black finish on
bushing, actuator and
hardware.
Fluorescent tip
Blank None
0.38 White fluorescent
tip to lever
Available with matt black
finish (G) only.
Special options
Blank No special
requirement
X408 Front panel sealing
by two O-rings
X404 Horizontal right
angle with reduced
overall dimensions
Other : specific bushing
height, PC terminal length,
finish, ratings, etc... See
following pages.
Caps and paddles
Caps Length
U270 11 (.433)
U1710 7,3 (.287)
Paddles
U240N 12,4 (.488)
U290N 20 (.787)
U390N 21,5 (.846)
Contact materials
ASilver
AD Silver, gold plated
CD Brass, gold plated
For peak currents, see X814,
under Special Options.
Sealing
Blank No sealing except
where standard
BEpoxy sealed
terminals
KFront panel sealing
by one O-ring and
sealing washer
Sealing by two O-rings, see
X408 under "Special
options".
Levers
Length with threaded plain
bushing bushing
-13 (std)10,5 (.413) 13,5 (.531)
-2 16 (.629) 19 (.748)
-7 - 6,6 (.259)
-8 (flat) 21,3 (.838) -
-9 (flat) 11,4 (.448) -
-12 (flat)6,3 (.248) -
-16 5,5 (.216) 8,5 (.334)
-17 7 (.275) 10 (.393)
-21 (+ U640) 21,3 (.838) -
insulated
-22 21,3 (.838) -
-23 14 (.551) -
-24 (large) 17,5 (.688) -
-25 16,30 (.642)
-27 (large) 11,7 (.460) -
-4N 9 (.354) 12 (.472)
4N for use with paddle actuators only.
Approvals
UL
CSA
VDE
CECC
Availability :
Consult factory for details of
approved models.
Locking levers
1V 1 locked position
2V 2 locked positions
3V 3 locked positions
Other, consult factory.
For models with Ø 6,35 (1/4) bushing.
A-26 APEM www.apem.com
5000 series
Toggle switches - solder lug terminals
Threaded bushing Ø 6,35 (1/4) : 5600
A
Single pole
Double pole
Three pole
MODEL
STRUCTURE
III II I
2-3 1-2
5636 ON - ON
5639 ON OFF ON
5637 MOM OFF MOM
5638 ON OFF MOM
5632 ON - MOM
III II I
2-3 1-2
5-6 4-5
5646 ON - ON
5649 ON OFF ON
5647 MOM OFF MOM
5648 ON OFF MOM
5642 ON - MOM
5644* ON ON ON
5644 1R* ON ON MOM
5644 2R* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
8-9 7-8
5656 ON - ON
5659 ON OFF ON
5657 MOM OFF MOM
5658 ON OFF MOM
5652 ON - MOM
• 1, 2, 3 and 4 pole configurations
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
➞Keyway
1 2 3
(.070)
(.043)
(.145)
(.074)
3.70
1.90
1.80
1.10
(.039)
1.00
10.50
(.413) (.314)
8.00
(.031)
0.80
(.019)
0.50
24˚
(.118 DIA)
Ø3.00
(.070)
1.80
(.519)
13.20
7.00
(.275)
(.185)
4.70
(.472)
12.00 (.145)
3.70
(1/4-40UNS)
Ø6.35-40UNS
I
II
III
3
2
1
13.20
(.519)
24˚
Ø3.00
(.118 DIA)
1.80
4.75
(.070)
(.187)
4.70
(.185)
0.80
(.031)
8.00
(.314)
(.413)
10.50
3.70
(.145)
0.50
(.019)
12.00
(.472)
1.00
(.039)
Ø6.35-40UNS
(1/4-40UNS)
(.472)
12.00
IIIIII
II
I
1
2
36
5
4
24˚
(.519)
13.20
(.118 DIA)
Ø3.00
(.070)
1.80
10.50
(.413) (.314)
8.00
(.039)
1.00
(.019)
0.50
(.031)
0.80
(.145)
3.70
(.516)
13.10
(1/4-40UNS)
Ø6.35-40UNS
(.649)
16.50
(.187)
4.75
III
II
I
3
2
17
8
9
(.185)
4.70
APEM www.apem.com A-27
5000 series
Toggle switches - solder lug terminals
Threaded bushing Ø 6,35 (1/4) : 5600
A
Four pole
III II I
2-3 1-2
5-6 4-5
8-9 7-8
11-12 10-11
5666 ON - ON
5669 ON OFF ON
5667 MOM OFF MOM
5668 ON OFF MOM
5662 ON - MOM
5664* ON ON ON
5664 1R* ON ON MOM
5664 2R* MOM ON MOM
*Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue.
PANEL CUT-OUT
With KWith X408
Standard sealing option sealing option
➞Keyway
13.20
1.80
Ø3.00
(.519)
(.070)
(.118 DIA)
3.70
(.145)
0.80
(.031) 0.50
(.019)
13.10
(.516)
1.00
(.039)
8.00
(.314)
(.413)
10.50
(1/4-40UNS)
Ø6.35-40UNS
(.834)
21.20
(.187)
4.75
24˚
III
II
I
4.70
(.185)
12
11
10
7
8
9
(.204)
(.255 DIA) (.086 DIA)
(.043)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50
(.255 DIA) Ø6.50
(.255 DIA)
2.70
(.106)
A-28 APEM www.apem.com
5000 series
Toggle switches - solder lug terminals
A
5700 models
• Flatted bushing Ø 6,35 mm (1/4)
• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to
5600 models and replace 6 with 7. PANEL CUT-OUT
Standard or
with Ksealing option
Diagram as per 5600 model
MODEL
STRUCTURE
5500 models
• Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS)
• 1, 2, 3 and 4 pole configurations
Diagram as per 5600 model
PANEL CUT-OUT
Standard With X408 sealing option
For model structure numbers, refer to
5600 models and replace 6 with 5.
MODEL
STRUCTURE
(.106)
2.70
(.255 DIA)
Ø6.50
(.244 DIA)
(.100)
(.244)
Ø6.20
6.20 2.55
Ø2.20
(.086 DIA) Ø6.20
(.244 DIA)
APEM www.apem.com A-29
5000 series
Toggle switches - solder lug terminals
Threaded bushing Ø 11,9 (15/32) : 5600M
A
Single pole
Double pole
Three pole
• 1, 2, 3 and 4 pole configurations
• Supplied with 2 hex nuts and 1 locking ring
• Panel thickness up to 6 mm (.236)
III II I
2-3 1-2
5636M ON - ON
5639M ON OFF ON
5637M MOM OFF MOM
5638M ON OFF MOM
5632M ON - MOM
III II I
2-3 1-2
5-6 4-5
5646M ON - ON
5649M ON OFF ON
5647M MOM OFF MOM
5648M ON OFF MOM
5642M ON - MOM
5644M* ON ON ON
5644M 1R* ON ON MOM
5644M 2R* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
8-9 7-8
5656M ON - ON
5659M ON OFF ON
5657M MOM OFF MOM
5658M ON OFF MOM
5652M ON - MOM
MODEL
STRUCTURE
Shown with standard lever (-24)
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
➞Keyway
➞Keyway
➞Keyway
➞Keyway
1 2 3
(.070)
(.043)
(.145)
(.074)
3.70
1.90
1.80
1.10
(.031)
0.80
(.019)
0.50
(.070)
1.80
(.185)
4.70
(.145)
3.70
24˚
(.433)
(.468)(.688)
(.196 DIA)
(15/32-32UNS)
13.20
(.519)
(.275)
7.00
Ø11.9-32UNS
17.50
11.00
11.90
Ø5.00
III
II
I
3
2
1
1.80
4.75
(.070)
(.187)
4.70
(.185)
11.90
11.00
17.50
(.688) (.468)
(.433)
24˚
3.70
(.145)
0.50
(.019)
0.80
(.031)
(.519)
13.20
12.00
(.472)
Ø5.00
Ø11.9-32UNS
(15/32-32UNS)
(.196 DIA)
III
II
I
1
2
36
5
4
(.070)
1.80
(.019)
0.50
(.031)
0.80
(.145)
3.70
(.187)
4.75
24˚
(.468)(.688)
17.50 11.90
(.476)
16.50
(.649) 12.10
Ø5.00
Ø11.9-32UNS
(15/32-32UNS)
(.196 DIA)
I
II
III
3
2
1
13.20
(.519)
7
8
9
(.185)
4.70
A-30 APEM www.apem.com
5000 series
Toggle switches - solder lug terminals
Threaded bushing Ø 11,9 (15/32) : 5600M
A
Four pole
III II I
2-3 1-2
5-6 4-5
8-9 7-8
11-12 10-11
5666M ON - ON
5669M ON OFF ON
5667M MOM OFF MOM
5668M ON OFF MOM
5662M ON - MOM
5664M* ON ON ON
5664M 1R* ON ON MOM
5664M 2R* MOM ON MOM
PANEL CUT-OUT
Standard With Ksealing option
*Function 4 : DP in 4P case - specify CT or TH connections, see end of catalogue.
➞Keyway
OTHER : M bushing can be combined with other types such as : 5200, Z, MIWR... Consult factory.
(.377) (.200)
(.066)
(.492 DIA) (.137 DIA)
Ø12.50
9.60
Ø3.50
5.10
1.70
Ø12.50
(.492 DIA)
1.80
(.070)
(.187)
4.75
Ø5.00
Ø11.9-32UNS
(15/32-32UNS)
(.196 DIA)
12.10
(.476)
11.9017.50
(.688) (.468)
24˚
3.70
(.145)
0.80
(.031) 0.50
(.019)
21.20
(.834)
I
II
III
(.519)
13.20
1
2
3
4.70
(.185)
12
11
10
APEM www.apem.com A-31
5000 series
Toggle switches - straight PC terminals
Threaded bushing Ø 6,35 (1/4) : 5200
A
Single pole
Double pole
Three pole
• Terminal spacing 4,7 mm (.185)
• 1, 2, 3 and 4 pole configurations
• Epoxy sealed terminals standard
For new projects, we recommend switches with support
bracket (option Y) which holds the switch securely on the PCB.
Other terminal lengths presented under "Special options".
Also available with plain bushing, see "Special options" X371
III II I
2-3 1-2
5236 B ON - ON
5239 B ON OFF ON
5237 B MOM OFF MOM
5238 B ON OFF MOM
5232 B ON - MOM
III II I
2-3 1-2
5-6 4-5
5246 B ON - ON
5249 B ON OFF ON
5247 B MOM OFF MOM
5248 B ON OFF MOM
5242 B ON - MOM
5244 B* ON ON ON
5244 1R B* ON ON MOM
5244 2R B* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
8-9 7-8
5256 B ON - ON
5259 B ON OFF ON
5257 B MOM OFF MOM
5258 B ON OFF MOM
5252 B ON - MOM
MODEL
STRUCTURE
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
➞Keyway
1 2 3
1.10
(.043)
4.00
5.30
(.157)
(.208)
13.20
(.519)
24°
12.00
(.472)
Ø3.00
(.118 DIA)
4.75
(.187)
8.00
(.314)
(.413)
10.50
1.00
(.039)
Ø6.35-40UNS
(1/4-40UNS)
4.00
(.157)
0.50
(.019)
0.80
(.031)
13.30
(.523)
1.10
(.043)
4.70
Ø1.60
(.063 DIA)
(.185)
(.187)
4.75
III
II
I
1
2
3
4.70
(.185)
6
5
4
Epoxy
(.039)
1.00
10.50
(.413) (.314)
8.00
(.031)
0.80
(.019)
0.50
24°
(.118 DIA)
Ø3.00
(.519)
13.20
7.00
(.275)
(.185)
4.70
(1/4-40UNS)
Ø6.35-40UNS
(.523) (.157)
13.30 4.00
(.043)
1.10
(.185)
(.063 DIA)
Ø1.60
4.70
I
II
III
3
2
1
Epoxy
(.519)
13.20
(.118 DIA)
Ø3.00
(.187)
4.75
16.50
(.649)
10.50
(.413) (.314)
8.00
(.039)
1.00
(1/4-40UNS)
Ø6.35-40UNS
(.031)
0.80
(.019)
0.50
(.157)
4.00
(.567)
14.40
(.043)
1.10
(.185)
4.70
(.187)
4.75
(.063 DIA)
Ø1.60
24°
III
II
I
3
2
17
8
9
(.185)
4.70
Epoxy
A-32 APEM www.apem.com
5000 series
Toggle switches - straight PC terminals
Threaded bushing Ø 6,35 (1/4) : 5200 - 5000
A
Terminal spacing 5,08 (.200) - single and double pole
Four pole
III II I
2-3 1-2
5-6 4-5
8-9 7-8
11-12 10-11
5266 B ON - ON
5269 B ON OFF ON
5267 B MOM OFF MOM
5268 B ON OFF MOM
5262 B ON - MOM
5264 B* ON ON ON
5264 1R B* ON ON MOM
5264 2R B* MOM ON MOM
5000 models
•Terminal spacing 5,08 mm (.200)
• Epoxy sealed terminals standard
• 1 and 2 pole configurations
Diagram as per 5200 model
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
5036 5046 ON - ON
5039 5049 ON OFF ON
5037 5047 MOM OFF MOM
5038 5048 ON OFF MOM
5032 5042 ON - MOM
5044* ON ON ON
5044 1R* ON ON MOM
5044 2R* MOM ON MOM
*Function 4 : DP in 4P case - specify CT ot TH connections, see end of catalogue.
MODEL
STRUCTURE
PANEL CUT-OUT
5200 - 5000 - 5400
Standard With Ksealing option
Shown with standard lever (-13)
➞Keyway
➞Keyway
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
(.255 DIA)
Ø6.50
1.10
2.70
5.20
Ø2.20Ø6.50
(.106)
(.043)
(.086 DIA)(.255 DIA)
(.204)
21.20
13.20
Ø3.00
(.834)
(.519)
4.75
(.187)
(.118 DIA)
8.00
(.314)
(.413)
10.50
(1/4-40UNS)
Ø6.35-40UNS
14.40
(.567) 4.00
(.157)
(.019)
1.00
(.039)
0.80
(.031)
(.043)
1.10
4.70
(.185)
(.187)
4.75
Ø1.60
(.063 DIA)
0.50
24°
III
II
I
4.70
(.185)
12
11
10
8
7
9
Epoxy
0.60
(.023)
(.216)
(.171)
5.50
4.35
Ø6.35-40UNS
(1/4-40UNS)
Ø3.00
(.118 DIA)
10.50
(.413)
(.314)
8.00
24˚
(.515)(.171)
(.200)
13.104.35
5.08
(.023)
0.60 (.023)
0.60 (.023)
0.60
(.039)
1.00
(.519) (.275)
(.472)
12.00 13.20 7.00
(.200)
(.200)
5.08
5.08
(.043 DIA)
5.08
(.200)
Ø1.10
EPOXY
13
2
III II I
APEM www.apem.com A-33
5000 series
Toggle switches - straight PC terminals
A
Diagram, as per 5200 model
5400 models
• Threaded bushing Ø 6,35 mm (1/4)
• Terminal spacing 4 mm (.157)
• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to
5200 models and replace 2 with 4.
Panel cut-out, see 5200.
5900 models
• Flatted bushing Ø 6,35 mm (1/4)
• Terminal spacing 4,7 mm (.185)
• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to
5200 models and replace 2 with 9. PANEL CUT-OUT
Standard or
with Ksealing option
MODEL
STRUCTURE
MODEL
STRUCTURE
➞Flat
1 2 3
(.106)
2.70
(.255 DIA)
Ø6.50
A-34 APEM www.apem.com
5000 series
Toggle switches - straight PC terminals
A
5100 models
• Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS)
• Terminal spacing 4,7 mm (.185)
• 1, 2, 3 and 4 pole configurations
For model structure numbers, refer to
5200 models and replace 2 with 1.
Diagram, as per 5200 model
5300 models
• Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS)
• Terminal spacing 4 mm (.157)
• 1, 2, 3 and 4 pole configurations
Diagram, as per 5200 model
For model structure numbers, refer to
5200 models and replace 2 with 3. PANEL CUT-OUT
5100 - 5300
Standard With X408 sealing option
MODEL
STRUCTURE
Panel cut-out, see below.
MODEL
STRUCTURE
(.244 DIA)
(.100)
(.244)
Ø6.20
6.20 2.55
Ø2.20
(.086 DIA) Ø6.20
(.244 DIA)
APEM www.apem.com A-35
5000 series
Toggle switches - quick-connect terminals
Threaded bushing Ø 6,35 (1/4) : 5200Z
A
Double pole
Single pole
• Terminal spacing 4,7 mm (.185)
• Epoxy sealed terminals standard
• 1and 2 pole configurations
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
MODEL
STRUCTURE
III II I
2-3 1-2
5236Z ON - ON
5239Z ON OFF ON
5237Z MOM OFF MOM
5238Z ON OFF MOM
5232Z ON - MOM
III II I
2-3 1-2
5-6 4-5
5246Z ON - ON
5249Z ON OFF ON
5247Z MOM OFF MOM
5248Z ON OFF MOM
5242Z ON - MOM
5244Z* ON ON ON
5244Z 1R* ON ON MOM
5244Z 2R* MOM ON MOM
PANEL CUT-OUT
With KWith X408
Standard sealing option sealing option
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
1 2 3
(.255)
(.208)
(.061)
6.50
5.30
1.57
(.204)
(.255 DIA) (.086 DIA)
(.043)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50
(.255 DIA) Ø6.50
(.255 DIA)
2.70
(.106)
(.519)
13.20
7.00
(.275)
1.00
(.039)
13.10
(.515)
24˚
8.00
(.314)
(.413)
10.50
0.78 4.70
5.30
(.208)
(.030) (.185)
1.57
(.061)
EPOXY
12 3
I
II
III
Ø6.35-40UNS
(1/4-40UNS)
(.118 DIA)
Ø3.00
Ø3.00
(.118 DIA)
(1/4-40UNS)
Ø6.35-40UNS
13.20
(.519)
12.00
(.472)
10.50
(.413) (.314)
8.00
24˚
(.515)
13.10
(.039)
1.00
(.185)
(.030)
(.187)
(.208)
5.30
4.70
0.78
4.75
(.061)
1.57
EPOXY
12 3
I
II
III
A-36 APEM www.apem.com
5000 series
Toggle switches - quick-connect terminals
A
5900Z models
• Flatted bushing Ø 6,35 mm (1/4)
• Terminal spacing 4,7 mm (.185)
• Epoxy sealed terminals standard
• 1and 2 pole configurations
For model structure numbers, refer to
5200Z models and replace 2 with 9. PANEL CUT-OUT
Standard or
with Ksealing option
5100Z models
•Threaded bushing Ø 6 mm x 0.75 SI (.236 x 0.75 IS)
• Terminal spacing 4,7 mm (.185)
• Epoxy sealed terminals standard
• 1and 2 pole configurations
For model structure numbers, refer to
5200Z models and replace 2 with 1. PANEL CUT-OUT
Standard
Diagram, as per 5900 model
Diagram, as per 5200 model
MODEL
STRUCTURE
MODEL
STRUCTURE
(.106)
2.70
(.255 DIA)
Ø6.50
(.086 DIA)
Ø2.20
6.20
Ø6.20
(.244)
(.244 DIA)
APEM www.apem.com A-37
5000 series
Toggle switches - wire-wrap terminals
Threaded bushing Ø 6,35 (1/4) : 5200MIWR
A
Terminal spacing 5,08 (.200) - double pole
Terminal spacing 5,08 (.200) - single pole
• Terminal spacing 5,08 mm (.200)
• Epoxy sealed terminals standard
• 1and 2 pole configurations
• Can also be used as extended PCB terminals
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
III II I
2-3 1-2
5236MIWR ON - ON
5239MIWR ON OFF ON
5237MIWR MOM OFF MOM
5238MIWR ON OFF MOM
5232MIWR ON - MOM
III II I
2-3 1-2
5-6 4-5
5246MIWR ON - ON
5249MIWR ON OFF ON
5247MIWR MOM OFF MOM
5248MIWR ON OFF MOM
5242MIWR ON - MOM
5244 MIWR* ON ON ON
5244 1R MIWR* ON ON MOM
5244 2R MIWR* MOM ON MOM
MODEL
STRUCTURE
PANEL CUT-OUT
With KWith X408
Standard sealing option sealing option
Shown with standard lever (-13)
➞Keyway
➞Keyway
➞Keyway
1 2 3
(.708)
(.665)
(.023)
18.00
16.90
0.60
Ø1.10
(.043 DIA) (.200)
5.08
10.50
(.413) (.314)
8.00
24˚
(.515)
13.10
(.023)
0.60
(.039)
1.00
0.60
(.023)
(.665)
16.90
(.275)
7.00
(.519)
(.200)
5.08
13.20
EPOXY
12 3
III
II
I
Ø3.00
(.118 DIA)
(1/4-40UNS)
Ø6.35-40UNS
1.00
(.039)
0.60
(.023)
0.60
(.023) 5.08
13.10
(.200)
(.515)
24˚
8.00
(.314)
(.413)
10.50
5.08
5.08
(.200)
(.200)
(.472)
12.00
(.519)
13.20
(.043 DIA)
Ø1.10
Ø6.35-40UNS
(1/4-40UNS)
(.118 DIA)
Ø3.00
(.665)
16.90
EPOXY
3
21
III
II
I
(.204)
(.255 DIA) (.086 DIA)
(.043)
(.106)
Ø6.50 Ø2.20
5.20 2.70
1.10
Ø6.50
(.255 DIA) Ø6.50
(.255 DIA)
2.70
(.106)
A-38 APEM www.apem.com
5000 series
Toggle switches - plain bushing
Right angle terminals - horizontal : 5200W
A
Three pole
Double pole
Single pole
• Terminal spacing 4,7 mm (.185)
• 1, 2 and 3 pole configurations
Special switch 5200WX404 with reduced overall dimensions
is presented under "Special options".
III II I
2-3 1-2
5236W ON - ON
5239W ON OFF ON
5237W MOM OFF MOM
5238W ON OFF MOM
5232W ON - MOM
III II I
2-3 1-2
5-6 4-5
5246W ON - ON
5249W ON OFF ON
5247W MOM OFF MOM
5248W ON OFF MOM
5242W ON - MOM
5244W* ON ON ON
5244W 1R* ON ON MOM
5244W 2R* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
8-9 7-8
5256W ON - ON
5259W ON OFF ON
5257W MOM OFF MOM
5258W ON OFF MOM
5252W ON - MOM
MODEL
STRUCTURE
Shown with standard lever (-13)
*Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
11.00
(.433)
6.00
13.50 (.236)
(.531)
Ø3.00
Ø6.25
(.246 DIA)
(.118 DIA)
3.70
(.145)
4.70
(.185)
5.08
(.200)
0.50
0.80 (.019)
(.031)
12.70
5.08
(.500)
(.200)
4.70
(.185)
(.275)
7.00
(.519)
13.20
24˚
7.40 12.70
(.500)(.291)
I
II
III
Ø1.60
(.062 DIA)
1.10
(.043)
(.039)
1.00
1
2
3
(.291) (.500) (.150)
(.118 DIA)
(.200)
(.185)
(.531) (.472)(.236)
(.031)
0.50
(.246 DIA)
(.145)
(.200)
(.500)(.150)
3.70 13.50 6.00 12.00
5.08
3.8112.707.40
4.70
Ø6.25
Ø3.00
0.80
(.019)
5.08
12.703.81
(.433)
11.00
24˚
13.20
(.519)
4.70
(.185)
III
II
I
Ø1.60
(.062 DIA)
1.10
(.043)
(.039)
1.00
1
2
3
4
6
Ø3.00
Ø6.25
(.246 DIA)
(.118 DIA)
(.150)(.564)(.283)
7.20 14.35 3.81
(.236) (.492)(.531) (.653)
(.145)
(.043)
(.519)
13.20
3.70 13.50 6.00 12.5 16.60
1.10
3.81 14.35
5.08
(.150) (.564)
(.196)
(.185)
4.70
(.031)
0.80
(.062 DIA)
Ø1.60
(.185)
(.019)
0.50
4.70
III
II
I
(.039)
1.00
4
5
6
24˚
7
9
5.08
(.200)
APEM www.apem.com A-39
5000 series
Toggle switches - plain bushing
Right angle terminals - horizontal : 5400W
A
PCB MOUNTING FOR 5200W
5400W models
• Terminal spacing 4 mm (.157)
• 1and 2 pole configurations
Diagram, as per 5200W model
PC LAYOUT
For model structure numbers, refer to
5200W single and double pole and
replace 2 with 4.
MODEL
STRUCTURE
(.653)
(.472)
(.275)
(.326)
(.236)
(.137)
3.50
7.00
6.00
12.00
8.30
16.60
SP DP 3P
(.062 DIA)
Ø1.60
(.157)
4.00
(.200)
(.500)
5.08
12.70
(.062 DIA)
Ø1.60
4.00
(.157)
3.81 12.70
5.08
(.150) (.500)
(.200)
SP DP
A-40 APEM www.apem.com
5000 series
Toggle switches - plain bushing
Right angle terminals - vertical : 5200WW
A
Three pole
Double pole
Single pole
• Pin spacing 3,81 mm (.150)
• 1, 2, 3 and 4 pole configurations
III II I
2-3 1-2
5236WW ON - ON
5239WW ON OFF ON
5237WW MOM OFF MOM
5238WW** ON OFF MOM
5232WW** ON - MOM
III II I
2-3 1-2
5-6 4-5
5246WW ON - ON
5249WW ON OFF ON
5247WW MOM OFF MOM
5248WW** ON OFF MOM
5242WW** ON - MOM
5244WW* ON ON ON
5244WW 1R* ON ON MOM
5244WW 2R* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
8-9 7-8
5256WW ON - ON
5259WW ON OFF ON
5257WW MOM OFF MOM
5258WW** ON OFF MOM
5252WW** ON - MOM
MODEL
STRUCTURE
Shown with standard lever (-13)
* and ** : see notes next page.
(.500) (.150)
(.531) (.236) (.433)
24˚
(.118 DIA)
(.246 DIA)
(.043)
(.222)
(.275)
(.200)
(.039)
(.150)
(.500)
(.200)
(.062 DIA)
(.301)
I
II
III
3.81
12.70
1.10
Ø3.00
Ø6.25
13.50 6.00 11.00 7.00
0.80
3.81
12.70
5.65
5.08
1.00
Ø1.60
5.08
3.00
(.118) (.519)
13.20
3
2
1
13.20
(.519)
5.65 12.70 3.81
(.222) (.150)
(.500)
Ø6.25
Ø3.00
(.246 DIA)
(.118 DIA)
11.006.00
13.50 (.433)(.236)
(.531)
24˚ 0.80
(.301)
(.472)
5.08
(.200)
Ø1.60
12.70 3.81
(.062 DIA)
(.500) (.150)
(.043)
1.10
(.187)
12.00
I
II
III
4.75
(.118)
3.00
6
5
4
3
2
1
5.08
(.039)
(.200)
1.00
(.187)
4.75
(.118 DIA)
(.246 DIA)
Ø3.00
Ø6.25
(.515)
13.10
(.500) (.150)
3.81
12.70
(.283)
4.75
(.187)
1.10
(.043)
(.649)
(.150)
(.500) 3.81
12.70
III
II
I
24˚
7.20
16.50
(.031)
0.80
3.00 13.20
(.118) (.519)
1.00
(.039)
(.200)
5.08
9
8
7
3
2
1
(.200)
5.08
(.062 DIA)
Ø1.60
4.75
(.187)
(.492)
6.00
(.236) 12.50
APEM www.apem.com A-41
5000 series
Toggle switches - plain bushing
Right angle terminals - vertical : 5200WW - 5400WW
A
Four pole
III II I
2-3 1-2
5-6 4-5
8-9 7-8
11-12 10-11
5266WW ON - ON
5269WW ON OFF ON
5267WW MOM OFF MOM
5268WW** ON OFF MOM
5262WW** ON - MOM
5264WW* ON ON ON
5264WW 1R* ON ON MOM
5264WW 2R* MOM ON MOM
* Function 4 : SP in DP case, DP in 4P case - specify CT or TH connections, see end of catalogue.
** Functions 2 and 8 : reversed connection available, consult factory.
PCB MOUNTING
5400WW models
• Pin spacing 2,54 mm (.100)
• 1, 2, 3 and 4 pole configurations
Diagram as per 5200WW model
For model structure numbers, refer
to 5200WW models and replace
2 with 4.
PC LAYOUT
MODEL
STRUCTURE
12.70 3.81
(.500) (.150)
Ø6.25
Ø3.00
(.246 DIA)
(.118 DIA)
13.10
(.515)
7.20
(.283) 12.70 3.81
(.150)
(.500)
(.043)
1.10
(.834)
(.187)
24˚
I
II
III
(.031)
5.08
(.200)
0.80
4.75
21.20
(.519)(.118)
(.039)
13.203.00
1.00
9
8
7
12
11
10
Ø1.60
(.062 DIA)
4.75
(.187)
5.08
(.200)
12.50
(.236)
6.00 (.492)
(.259)
21.20
(.834)
16.50
(.649)
12.00
(.472)
7.00
(.275)
13.20
(.519)
6.60
SP DP 3P 4P
5.08
Ø1.60
12.70 2.54
(.062 DIA)
(.200)
(.500) (.100)
(.100)
(.500)
(.062 DIA)
2.54
12.70
Ø1.60 Ø1.60
12.70 2.54
(.062 DIA)
(.500) (.100)
(.062 DIA)
Ø1.60
(.100)
(.500) 2.54
12.70
(.200)
5.08 (.200)
5.08 (.200)
5.08
SP DP 3P 4P
A-42 APEM www.apem.com
5000 series
Toggle switches - plain bushing
Straight PC terminals - bracket mounting : 5200Y
A
Short bracket - width 15,75 (.620) - double pole : 5240Y
Short bracket - width 15,75 (.620) - single pole : 5230Y
Brackets reduce mechanical stress on solder joints
and increase resistance to vibrations.
Bracket material : tin plated steel.
• Epoxy sealed terminals standard
• 1and 2 pole configurations
III II I
2-3 1-2
5236Y B ON - ON
5239Y B ON OFF ON
5237Y B MOM OFF MOM
5238Y B ON OFF MOM
5232Y B ON - MOM
MODEL
STRUCTURE
Y - Y6 Y4 - Y7
Shown with standard lever (-13)
III II I
2-3 1-2
5-6 4-5
5246Y B ON - ON
5249Y B ON OFF ON
5247Y B MOM OFF MOM
5248Y B ON OFF MOM
5242Y B ON - MOM
5244Y B* ON ON ON
5244Y 1R B* ON ON MOM
5244Y 2R B* MOM ON MOM
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
1.10
(.043)
4.00
5.30
(.157)
(.208)
(.043)
1.10
(.334)
(0.385)
9.80
8.50
24˚
(.125)
(.620) (.275)
(.531)(.220)
(.511)(.161)
4.10 13.00
5.60 13.50
3.18
15.75 7.00
15.75
(.620)
3.18
(.125)
(.185)
4.70
EPOXY
(.062 DIA)
Ø1.60
123
(.118 DIA)
(.246 DIA)
Ø6.25
Ø3.00
0.40
(.015) (.046)
1.17
III II I
(.620)
15.75
(.125)
3.18
15.75
3.18
(.620)
(.125) 4.75
Ø6.25
8.20
4.70
6.00 13.10
(.185)
(.187)
(.322)
(.246 DIA)
(.118 DIA)
24˚
(.236) (.515)
III
(.472)
(.511)(.185)
12.00
4.70 13.00
EPOXY
(.062 DIA)
Ø1.60
3
2
1
Ø3.00
(.015) (.046)
0.40 1.17
II I
APEM www.apem.com A-43
5000 series
Toggle switches - plain bushing
Straight PC terminals - bracket mounting : 5200Y4 - Y6 - Y7
A
Tall bracket - width 19,05 (.750) : 5200Y7
Short bracket - width 19,05 (.750) : 5200Y6
Tall bracket - width 15,75 (.620) : 5200Y4
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
5236Y7 B 5246Y7 B ON - ON
5239Y7 B 5249Y7 B ON OFF ON
5237Y7 B 5247Y7 B MOM OFF MOM
5238Y7 B 5248Y7 B ON OFF MOM
5232Y7 B 5242Y7 B ON - MOM
5244Y7 B* ON ON ON
5244Y7 1R B* ON ON MOM
5244Y7 2R B* MOM ON MOM
* Function 4 : SP in DP case - specify CT or TH connections, see end of catalogue.
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
5236Y6 B 5246Y6 B ON - ON
5239Y6 B 5249Y6 B ON OFF ON
5237Y6 B 5247Y6 B MOM OFF MOM
5238Y6 B 5248Y6 B ON OFF MOM
5232Y6 B 5242Y6 B ON - MOM
5244Y6 B* ON ON ON
5244Y6 1R B* ON ON MOM
5244Y6 2R B* MOM ON MOM
III II I
2-3 1-2
5-6 4-5
Single pole Double pole
5236Y4 B 5246Y4 B ON - ON
5239Y4 B 5249Y4 B ON OFF ON
5237Y4 B 5247Y4 B MOM OFF MOM
5238Y4 B 5248Y4 B ON OFF MOM
5232Y4 B 5242Y4 B ON - MOM
5244Y4 B* ON ON ON
5244Y4 1R B* ON ON MOM
5244Y4 2R B* MOM ON MOM
16.00
(.629)
(.515)(.236)
24˚ (.118 DIA)
(.246 DIA)
(.322)
(.187)
(.185)
13.106.00
4.70
8.20
Ø3.00
Ø6.25
4.75
4.70
(.185)
(.204)
5.20
(.125)
(.125)
(.620)
3.18 15.75
3.18
(.125)
3.18
(.620)
15.75
3.18
(.125)
15.75
(.620)
EPOXY
(.062 DIA)
Ø1.60
123
(.472)
12.00
0.40
(.015)
(.046)
1.17
III II I
(.250) (.750)
(.515)(.236)
(.511)
24˚ (.118 DIA)
(.246 DIA)
(.185)
(.472)
(.250)
(.322)
(.250)
(.250)
(.187)
(.185)
4.70 13.00
13.106.00
4.70
6.35 19.05
8.20
Ø6.25
6.35
12.00 4.75
6.35
6.35
123
(.750)
19.05 19.05
(.750)
4.70
(.185)
EPOXY
Ø3.00
Ø1.60
(.062 DIA)
0.40
(.015)
(.050)
1.27
III II I
(.185)
4.70
(.750)
19.05
19.05
(.750)
6.35
6.35
4.75
6.35
Ø6.25
8.20
19.05
6.35
4.70
6.00 13.10
(.185)
(.187)
(.250)
(.250)
(.322)
(.250)
(.246 DIA)
(.118 DIA)
24˚
(.236) (.515)
(.750)
(.250)
(.629)(.204)
5.20 16.00
EPOXY
(.062 DIA)
Ø1.60
3
2
1
Ø3.00
12.00
(.472)
(.015)
0.40
1.27
(.050)
III II I
