MAAL-007673-000000 - M/A-COM Technology Solutions

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Low Noise Amplifier

1.7 - 2.0 GHz

Rev. V2

MAAL-007673

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Low Noise Figure: 1.65 dB

• High Gain: 20 dB

• Low Power Consumption: 3 to 5 V, 8 mA

• High Dynamic Range

• DC Decoupled RF Input and Output

• No External RF Tuning Elements Necessary

• Lead-Free Low Cost SOIC-8 Plastic Package

• 100% Matte Tin Plating over Copper

• Halogen-Free “Green” Mold Compound

• 260°C Reflow Compatible

• RoHS* Compliant Version of MAAM12031

Description

M/A-COM’s MAAL-007673 is a high performance

GaAs MMIC low noise amplifier in a lead-free SOIC

8-lead surface mount package. The MAAL-007673

employs a fully monolithic design which eliminates

the need for external tuning networks. It can be

biased using 3 or 5 volt supplies and has an option

for biasing at higher currents for increased dynamic

range.

The MAAL-007673 is ideally suited for use where

low noise figure, high gain, high dynamic range and

low power consumption are required. Typical

applications include receiver front ends in the

Japanese Personal Handy Phone Service (PHS),

Private Branch Exchange (PBX) and Personal

Communications and Networks (PCS, PCN)

markets, as well as standard gain blocks, buffer

amps, driver amps and IF amps in both fixed and

portable systems.

M/A-COM’s MAAL-007673 is fabricated using a

mature 0.5-micron gate length GaAs process. The

process features full passivation for increased

performance reliability.

Ordering Information1

Part Number Package

MAAL-007673-000000 Bulk Packaging

MAAL-007673-TR1000 1000 piece reel

MAAL-007673-TR3000 3000 piece reel

1. Reference Application Note M513 for reel size information.

Functional Schematic

Pin Configuration

Pin No. Function Pin No. Function

1 Ground 5 Ground

2 R1 (Optional) 6 RF Output

3 RF Input 7 VDD

4 Ground 8 Ground

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

8 7 6 5

1 2 3 4

RF OUT

GND

GND RF IN

GNDGND VDD

(optional)

Absolute Maximum Ratings 2,3

Parameter Absolute Maximum

VDD +10 VDC

Input Power +17 dBm

Current 4 30 mA

Channel Temperature 5 +150°C

Operating Temperature -40°C to +85°C

Storage Temperature -65°C to +150°C

2. Exceeding any one or combination of these limits may cause

permanent damage to this device.

3. M/A-COM does not recommend sustained operation near

these survivability limits.

4. Only if pin 2 is used to increase current (see note 9).

5. Typical thermal resistance (θjc) = +165°C/W.

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Low Noise Amplifier

1.7 - 2.0 GHz

Rev. V2

MAAL-007673

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications6: TA = 25°C, VDD = +5 V, Z0 = 50 Ω

Parameter Test Conditions Units Min. Typ. Max.

Gain 1.7 - 2.0 GHz, PIN = -30 dBm dB 18 20 22

Noise Figure 1.7 - 2.0 GHz dB — 1.65 2.00

Input VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 —

Output VSWR 1.7 - 2.0 GHz, PIN = -30 dBm Ratio — 1.7:1 —

Output 1 dB Compression 1.7 - 2.0 GHz dBm — 7 —

Input IP3 1.7 - 2.0 GHz, PIN = -30 dBm dBm — -1 —

Reverse Isolation 1.7 - 2.0 GHz, PIN = -30 dBm dB — 38 —

Bias Current — mA 5 8 11

6. See plots for 3-volt performance.

Component List

Part Value Case Size Manufacturer

C1 500 pF 0603 Murata

L1 15 nH 0805 Coilcraft

R1 (Optional) 35 to 40 Ω 0603 Panasonic

7. Pins 1, 4, 5 and 8 must be RF and DC grounded as shown.

8. Pin 3 is the RF input, pin 6 is the RF output. VDD is

applied on pin 7. This pin must be bypassed with a 500 pF

surface mount MLC capacitor, mounted as close as

possible to pin 7, and RF decoupled with a chip inductor

having a minimum value of 15 nH (as shown in the

Recommended PCB Configuration).

9. Pin 2 allows use of an external resistor to ground for

optional, higher current bias. For nominal current

operation no resistor is used. For optional 20 mA current

operation, connect a 35 to 40 ohm chip resistor (as show in

the Recommended PCB Configuration).

Recommended PCB Configuration Application Schematic 7,8,9

VDD

RF IN RF OUT

(Optional)

See Note 9

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Low Noise Amplifier

1.7 - 2.0 GHz

Rev. V2

MAAL-007673

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Noise Figure @ +25°C

VSWR @ 5 V, 8 mA, +25°C Input IP3 @ +25°C

Typical Performance Curves

Gain @ 5 V, 8 mA Noise Figure @ 5 V, 8 mA

Gain @ +25°C

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2

3 VOLTS, 8mA

5 VOLTS, 8mA

5 VOLTS, 20mA

Frequency (GHz)

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2

+25 C

-40 C

+85 C

Frequency (GHz)

1.5

1.6

1.7

1.8

1.9

1.7 1.8 1.9 2.0

3 VOLTS, 8mA

5 VOLTS, 8mA

5 VOLTS, 20mA

Frequency (GHz)

-8

-6

-4

-2

1.7 1.8 1.9 2.0

3 VOLTS, 8mA

5 VOLTS, 8mA

5 VOLTS, 20mA

Frequency (GHz)

1.2

1.5

1.8

2.1

2.4

1.70 1.75 1.80 1.85 1.90 1.95 2.00

+25 C

-40 C

+85 C

Frequency (GHz)

1.0

1.5

2.0

2.5

3.0

1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2

INPUT

OUTP UT

Frequency (GHz)

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Low Noise Amplifier

1.7 - 2.0 GHz

Rev. V2

MAAL-007673

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Lead-Free SOIC-8†

† Reference Application Note M538 for lead-free solder reflow recommendations.

Additional information is available in Application Note M540, “M/A-COM GaAs MMIC LNA SOIC-8 Platform”.