KP 1836 Vishay Roederstein Polypropylene Film Capacitors Related Document: IEC 60384-17 Grade 1.2 FEATURES Dimensions in millimeters * Compliant to RoHS directive 2002/95/EC L Max. W Max. Marking H Max. 0.6 LEADS Tinned wire IEC TEST CLASSIFICATION 55/100/56 according to IEC 60068 0.4 PCM 0.4 6.0 -1 OPERATING TEMPERATURE RANGE - 55 C to + 100 C Od CAPACITANCE RANGE W 16 < 16.0 Od 1.0 0.8 100 pF to 0.22 F CAPACITANCE TOLERANCES 10 % (K), 5 % (J) MAIN APPLCATIONS High voltage, very high current and high pulse operations, deflection circuits in TV sets (fly-back tuning). Electronic ballasts, protection circuits in SMPS's. Snubber and SCR commutating circuits. MARKING Manufacturer's logo, type, C-value, rated voltage, tolerance, data of manufacture DIELECTRIC RATED VOLTAGES 630 VDC, 1000 VDC, 1250 VDC, 1600 VDC, 2000 VDC PERMISSIBLE AC VOLTAGES (RMS) UP TO 60 Hz 300 VAC, 350 VAC, 400 VAC, 500 VAC, 600 VAC TEST VOLTAGES (ELECTRODE/ELECTRODE) 2 x UR for 2 s Polypropylene film TEMPERATURE COEFFICIENT ELECTRODES - 250 x 10-6/C (typical value) Aluminum foil CAPACITANCE DRIFT COATING Flame retardant plastic case (UL-class 94 V-0), epoxy resin sealed. COSTRUCTION Extended aluminum foil, internal series double-sided metallized, polyester carrier film connection, Up to + 40 C, 0.5 % for a period of two years DERATING FOR DC AND AC CATEGORY VOLTAGE UC At + 85 C: UC = 1.0 UR At + 100 C: UC = 0.7 UR INSULATION RESISTANCE SELF INDUCTANCE Measured at 500 VDC after one minute 100 000 M minimum value, (1000 G typical value) ~ 6 nH measured with 2 mm long leads PULL TEST ON LEADS 30 N in direction of leads according to IEC 60068-2-21 RELIABILITY Operational life > 300 000 h Failure rate < 1 FIT (0.5 x UR and 40 C) For further details, please refer to the general information available at www.vishay.com/doc?26033 Document Number: 26021 Revision: 17-Jun-10 For technical questions, contact: dc-film@vishay.com www.vishay.com 1 KP 1836 Polypropylene Film Capacitors Related Document: IEC 60384-17 Grade 1.2 Vishay Roederstein MAXIMUM PULSE RISE TIME PCM (mm) 15 22.5 27.5 37.5 Maximum Pulse Rise Time dV/dt [V/s] 1000 VDC 1250 VDC 1600 VDC 8200 11 100 13 900 3200 4600 6000 2300 3100 4000 1500 1900 2400 630 VDC 6500 2600 1800 1200 2000 VDC 13 900 9800 6000 3500 Note * If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted. DISSIPATION FACTOR TAN C 0.1 F 0.3 x 10-3 0.4 x 10-3 1 x 10-3 MEASURED AT 1 kHz 10 kHz 100 kHz C > 1.0 F 0.3 x 10-3 0.4 x 10-3 Maximum values CAPACITANCE CAPACITANCE CODE 100 pF -110 150 pF -115 220 pF -122 330 pF -133 470 pF -147 680 pF -168 1000 pF -210 1200 pF -212 1500 pF -215 1800 pF -218 2200 pF -222 2700 pF -227 3300 pF -233 3900 pF -239 4700 pF -247 5600 pF -256 6800 pF -268 8200 pF -282 0.01 F -310 0.012 F -312 0.015 F -315 0.018 F -318 0.022 F -322 0.027 F -327 0.033 F -333 0.039 F -339 0.047 F -347 0.056 F -356 0.068 F -368 0.082 F -382 0.1 F -410 0.12 F -412 0.15 F -415 0.18 F -418 0.22 F -422 Note * Further C-values upon request. www.vishay.com 2 W 5.5 5.5 6.5 6.5 7.5 7.5 8.5 8.5 8.5 10.5 7.5 7.5 8.5 10.5 10.5 10.5 11.5 11.5 11.5 13.5 12.5 12.5 14.5 14.5 VOLTAGE CODE 63 630 VDC/300 VAC H L 10.5 18.0 10.5 18.0 12.5 18.0 12.5 18.0 13.5 18.0 13.5 18.0 14.5 18.0 14.5 18.0 17.5 18.0 17.5 18.0 15.5 26.5 15.5 26.5 16.5 26.5 18.5 26.5 18.5 26.5 18.5 26.5 20.5 31.5 20.5 31.5 20.5 31.5 23.5 31.5 22.5 41.5 22.5 41.5 24.5 41.5 24.5 41.5 PCM 15 15 15 15 15 15 15 15 15 15 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 W 5.5 5.5 6.5 6.5 7.5 7.5 8.5 8.5 6.5 6.5 7.5 7.5 8.5 8.5 10.5 11.5 11.5 11.5 12.5 12.5 12.5 14.5 14.5 16.0 16.0 18.0 VOLTAGE CODE 10 1000 VDC/350 VAC H L 10.5 18.0 10.5 18.0 12.5 18.0 12.5 18.0 13.5 18.0 13.5 18.0 14.5 18.0 14.5 18.0 14.5 26.5 14.5 26.5 15.5 26.5 15.5 26.5 16.5 26.5 16.5 26.5 18.5 26.5 20.5 31.5 20.5 31.5 20.5 31.5 22.5 41.5 22.5 41.5 22.5 41.5 24.5 41.5 24.5 41.5 28.5 41.5 28.5 41.5 32.5 41.5 For technical questions, contact: dc-film@vishay.com PCM 15 15 15 15 15 15 15 15 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 W 5.5 5.5 6.5 6.5 7.5 7.5 6.5 6.5 6.5 6.5 57.5 7.5 10.5 10.5 11.0 11.0 11.0 11.0 13.5 13.5 12.5 12.5 14.5 14.5 16.0 16.0 20.0 20.0 VOLTAGE CODE 12 1250 VDC/400 VAC H L 10.5 18.0 10.5 18.0 12.5 18.0 12.5 18.0 13.5 18.0 13.5 18.0 14.5 26.5 14.5 26.5 14.5 26.5 14.5 26.5 15.5 26.5 15.5 26.5 18.5 26.5 18.5 26.5 21.0 26.5 21.0 26.5 21.0 31.0 21.0 31.0 23.5 31.5 23.5 31.5 23.5 41.5 22.5 41.5 24.5 41.5 24.5 41.5 28.5 41.5 28.5 41.5 40.0 42.5 40.0 42.5 PCM 15 15 15 15 15 15 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 Document Number: 26021 Revision: 17-Jun-10 KP 1836 Polypropylene Film Capacitors Vishay Roederstein RECOMMENDED PACKAGING LETTER CODE D TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLES PCM 15 PCM 22.5 to 27.5 PCM 37.5 Ammo 16.5 S (1) KP 1836-168/205-D X - - G Ammo 18.5 S (1) KP 1836-168/205-G X - F Reel 16.5 350 KP 1836-168/205-F X - - W Reel 18.5 350 KP 1836-168/205-W X - - V Reel 18.5 500 KP 1836-310/134-V X X - G Ammo 18.5 L (2) KP 1836-310/134-G - X - - Bulk - - KP 1836-310/134 X X X Note (1) S = box size 55 mm x 210 mm x 340 mm (W x H x L) (2) L = box size 60 mm x 360 mm x 510 mm (W x H x L) CAPACITANCE VOLTAGE CODE 13 1600 VDC/500 VAC CAPACITANCE CODE 100 pF -110 150 pF -115 220 pF -122 330 pF -133 470 pF -147 680 pF -168 1000 pF -210 1200 pF -212 1500 pF -215 1800 pF -218 2200 pF -222 2700 pF -227 3300 pF -233 3900 pF -239 4700 pF -247 5600 pF -256 6800 pF -268 8200 pF -282 0.01 F -310 0.012 F -312 0.015 F -315 0.018 F -318 0.022 F -322 0.027 F -327 0.033 F -333 0.039 F -339 0.047 F -347 0.056 F -356 0.068 F -368 0.082 F -382 0.1 F -410 0.12 F -412 0.15 F -415 0.18 F -418 0.22 F -422 Note * Further C-values upon request. Document Number: 26021 Revision: 17-Jun-10 W 5.5 5.5 6.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 8.5 8.5 10.5 10.5 11.5 11.5 11.5 11.5 13.5 13.5 12.5 12.5 14.5 14.5 16.0 16.0 - H 10.5 10.5 12.5 12.5 14.5 14.5 14.5 14.5 15.5 15.5 16.5 16.5 18.5 18.5 20.5 20.5 20.5 20.5 23.5 23.5 22.5 22.5 24.5 24.5 28.5 28.5 - L 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 31.5 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 - VOLTAGE CODE 20 2000 VDC/600 VAC PCM 15 15 15 15 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 - W 5.5 5.5 5.5 5.5 5.5 5.5 6.5 6.5 6.5 6.5 6.5 7.5 7.5 10.5 10.5 10.5 11.5 11.5 11.5 13.5 13.5 15.0 15.0 14.5 14.5 16.0 16.0 - For technical questions, contact: dc-film@vishay.com H 10.5 10.5 10.5 10.5 10.5 10.5 14.5 14.5 14.5 14.5 14.5 15.5 15.5 18.5 18.5 18.5 20.5 20.5 20.5 23.5 23.5 24.5 24.5 24.5 24.5 28.5 28.5 - L 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 26.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 - PCM 15 15 15 15 15 15 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 - www.vishay.com 3 KP 1836 Polypropylene Film Capacitors Related Document: IEC 60384-17 Grade 1.2 Vishay Roederstein RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLES PCM 15 PCM 22.5 to 27.5 PCM 37.5 D Ammo 16.5 S (1) G Ammo KP 1836-168/205-D X - - 18.5 S (1) KP 1836-168/205-G X - F - Reel 16.5 350 KP 1836-168/205-F X - - W Reel 18.5 350 KP 1836-168/205-W X - - V Reel 18.5 500 KP 1836-310/134-V X X G Ammo 18.5 L (2) KP 1836-310/134-G - X - - Bulk - - KP 1836-310/134 X X X 1000 7 5 Capacitance in pF and F 3 2 VRMS VRMS Note (1) S = box size 55 mm x 210 mm x 340 mm (W x H x L) (2) L = box size 60 mm x 360 mm x 510 mm (W x H x L) 00 0.2 7 5 0.1 2 Capacitance in pF and F 22 3 2 27 00 47 100 1000 7 5 47 00 0.0 1 0.0 22 0.2 2 0.1 0. 100 0.0 3 2 0.0 1 7 5 47 0.0 27 3 2 630 VDC 04 7 1000 VDC 10 10 2 3 5 7 104 2 3 5 7 105 2 3 103 5 7 106 f [Hz] Permissible AC Voltage vs. Frequency 1000 7 5 Capacitance in pF and F 5 7 104 3 2 5 7 105 3 22 15 0 0.1 0.0 4 7 0.0 22 0 .01 00 0.2 2 0 .1 7 5 0.0 47 5 7 106 3 Capacitance in pF and F 3 2 0 100 2 f [Hz] 1000 7 5 12 0 3 2 2 Permissible AC Voltage vs. Frequency VRMS 103 VRMS 00 47 47 00 00 10 00 100 47 00 0.0 22 0. 01 0 22 7 5 3 2 3 2 1600 VDC 1250 VDC 10 10 103 2 3 5 7 104 2 3 5 7 105 2 3 103 5 7 106 f [Hz] VRMS Permissible AC Voltage vs. Frequency 2 5 7 104 3 2 Permissible AC Voltage vs. Frequency 1000 7 5 3 5 7 105 2 3 5 7 106 f [Hz] Capacitance in pF and F 0.0 47 3 2 15 0 0.0 22 0.0 1 470 0 47 0 22 00 10 00 100 7 5 3 2 2000 VDC 10 103 2 3 5 7 104 2 3 5 7 105 2 3 Permissible AC Voltage vs. Frequency www.vishay.com 4 For technical questions, contact: dc-film@vishay.com 5 7 106 f [Hz] Document Number: 26021 Revision: 17-Jun-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1