HAGC-40-30-20-7/5 - MITEQ, Inc. - Datasheet.Directory

HAGC series amplifiers provide constant output power over the entire input dynamic range automatically.

Optionally, these amplifiers can be supplied with linearizers (dB/volt) for customized applications. These amplifiers

are used in communication systems, such as satellite receivers, telemetry receivers and radar receivers.

FEATURES

• Excellent passband gain flatness

• Very low gain variation through dynamic range

• Low noise figure

• Wide input dynamic ranges available

HIGH-PERFORMANCE COMMUNICATION

AUTOMATIC-CONTROL AMPLIFIER MODULE

HAGC SERIES

MODEL CENTER FREQ. FREQ. SPAN DYNAMIC RANGE GAIN FLATNESS AGC GAIN VAR.

NUMBER* (MHz) (MHz) (dB) (dB) (dB)

HAGC-40-30-20-I/O 30 20 40 0.15 0.5

HAGC-50-30-20-I/O 30 20 50 0.15 0.4

HAGC-60-30-20-I/O 30 20 60 0.2 0.4

HAGC-70-30-20-I/O 30 20 70 0.25 0.5

HAGC-40-70-40-I/O 70 40 40 0.15 0.5

HAGC-50-70-40-I/O 70 40 50 0.20 0.4

HAGC-60-70-40-I/O 70 40 60 0.25 0.4

HAGC-70-70-40-I/O 70 40 70 0.3 0.5

HAGC-40-140-40-I/O 140 40 40 0.25 0.5

HAGC-50-140-40-I/O 140 40 50 0.25 0.4

HAGC-60-140-40-I/O 140 40 60 0.25 0.4

HAGC-40-140-80-I/O 140 80 40 0.5 0.5

HAGC-50-140-80-I/O 140 80 50 0.5 0.5

HAGC-60-140-80-I/O 140 80 60 0.5 0.5

HAGC-70-140-80-I/O 140 80 70 0.6 0.6

HAGC-40-160-40-I/O 160 40 40 0.25 0.4

HAGC-50-160-80-I/O 160 80 50 0.5 0.5

HAGC-70-160-80-I/O 160 80 70 0.6 0.6

HAGC-40-200-40-I/O 200 40 40 0.25 0.4

HAGC-50-200-80-I/O 200 80 50 0.5 0.5

HAGC-70-200-80-I/O 200 80 70 0.6 0.6

* I = Input impedance; O = Output impedance.

For impedance of 75 ohms, I or O = 7; for impedance of 50 ohms, I or O = 5.

30 MHz IF

70 MHz IF

140 MHz IF

160 MHz IF

200 MHz IF

Input/output impedance....................................... 50 or 75 ohms

Input return loss................................................... > 18 dB

Noise figure.......................................................... < 8 dB

Output power....................................................... 0 dBm

Output return loss................................................ > 18 dB

PRIMARY POWER REQUIREMENTS

Current/voltage.................................................... 150 mA @ +15 volts

40 mA @ -15 volts

PHYSICAL

Dimensions.......................................................... 2.1” x 2.1” x .75”

CONNECTORS

Input/output.......................................................... SMA female

DC power............................................................. Feedthru terminal

Housing ground ................................................... 2-56 terminal

HAG-1 Output test monitor port (impedance is the same as the main output).

HAG-2 Other input frequencies (customer to specify).

HAG-3 Wider frequency span (customer to specify).

HAG-4 Other dynamic range (customer to specify).

COMMON ELECTRICAL SPECIFICATIONS

OPTIONS

MECHANICAL SPECIFICATIONS