1
G3VM-21AR/DRDIP
G3VM-21AR/DR
MOS FET Relays
Higher power, 3-A switching with a 20-V
load voltage, DIP package.
Low 40 mΩ ON Resistance.
• Continuous load current of 3 A.
• Switches minute analog signals.
• Dielectric strength of 2,500 Vrms between I/O.
■Application Examples ■
Terminal Arrangement/Internal Connections
■List of Models
*The AC peak and DC value are given for the load voltage.
■Absolute Maximum Ratings (Ta = 25°C)
■Electrical Characteristics (Ta = 25°C)
RoHS compliant Note: The actual product is marked differently from the
image shown here.
• Communication equipment
• Test & Measurement equipment
• Security equipment
• Factory Automation equipment
• Power circuit
43
12
932
OMRON logo
Pin 1 mark
Model name
Mold pin mark
∗
LOT No.
Note: The actual product is marked differently from the image shown here.
∗The indentation in the corner diagonally opposite from the pin 1 mark is from
a pin on the mold.
Package type Contact form Terminals Load voltage
(peak value) *Model Minimum package quantity
Number per stick
Number per tape and reel
DIP4 1a
(SPST-NO)
PCB terminals
20 V
G3VM-21AR 100 ---
Surface-mounting terminals G3VM-21DR
G3VM-21DR (TR) --- 1,500
Item Symbol Rating Unit Measurement conditions
Input
LED forward current IF30 mA
Note: 1. The dielectric strength between the input and
output was checked by applying voltage
between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Repetitive peak LED forward current
IFP 1 A 100 µs pulses, 100 pps
LED forward current reduction rate
∆IF/°C−0.3 mA/°CTa ≥ 25°C
LED reverse voltage VR5 V
Connection temperature
TJ125 °C
Output
Load voltage (AC peak/DC)
VOFF 20 V
Continuous load current (AC peak/DC)
IO3A
ON current reduction rate
∆IO/°C−30 mA/°CTa ≥ 25°C
Pulse ON current Iop 9 A t = 100 ms, Duty = 1/10
Connection temperature
TJ125 °C
Dielectric strength between I/O (See note 1.)
VI-O 2500 Vrms AC for 1 min
Operating temperature Ta −40 to +85 °C With no icing or condensation
Storage temperature Tstg −55 to +125 °C With no icing or condensation
Soldering temperature --- 260 °C 10 s
Item Symbol
Minimum
Typical
Maximum
Unit Measurement conditions
Input
LED forward voltage VF1.18 1.33 1.48 V IF = 10 mA Note: 2. Turn-ON and Turn-OFF Times
Reverse current IR--- --- 10 µA VR = 5 V
Capacity between terminals
CT--- 70 --- pF V = 0, f = 1 MHz
Trigger LED forward current
IFT --- 0.7 3 mA IO = 1 A
Output
Maximum resistance with output ON
RON --- 40 80 mΩIF = 5 mA, IO = 2 A, t < 1s
Current leakage when the relay is open
ILEAK --- --- 1.0 µA VOFF = 20 V
Capacity between terminals
COFF --- 300 --- pF V = 0, f = 1 MHz
Capacity between I/O terminals
CI-O --- 0.8 --- pF f = 1 MHz, VS = 0 V
Insulation resistance between I/O terminals
RI-O 1000 --- --- MΩ
V
I-O
= 500 VDC, R
O
H
≤
60%
Turn-ON time tON --- 1 5 ms IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.3 1 ms
V
OUT
I
F
t
ON
t
OFF
90%
10%
I
F
1
2
4
3
R
L
V
DD
V
OUT