Series 0513 Pin-Line Collet Sockets with Solder Tail Pins FEATURES: * Rows of socket strips may be mounted on any centers and are end-to-end or side-by-side stackable for .100 [2.54] grid or matrix patterns. * Available with solder tail or wire wrap pins. Consult Data Sheet No. 12014 for wire wrap pins. * "Break" feature allows strips to be cut to the number of positions desired. SPECIFICATIONS: * Body material is black UL 94V-0 Glass-filled 4/6 Nylon. * Pin body is Brass Alloy 360 1/2 hard per UNS C36000 ASTMB16-00. * Pin body plating is either 10 [.25m] min. Gold per MIL-G45204 or 200 [5.08m] min. 93/7 Tin/Lead per ASTM B545 or 200 [5.08m] min. Tin per ASTM B545 Type 1 over 100 [2.54m] min. Nickel per SAE-AMS-QQ-N-290. Note: Aries specializes in custom design and production. In addition to the * 4-fingered collet contact is Beryllium Copper Alloy per UNS standard products shown on this page, special materials, platings, sizes, and C17200 ASTM-B194-01. configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice. * Contact plating is either 200 [5.08m] min. 93/7 Tin/Lead per ASTM B545 or 200 [5.08m] min Tin per ASTM B545 Type 1 ORDERING INFORMATION or 10 [.25m] Gold per MIL-G-45204 over 50 min. [1.27m] XX-0513-1XXXX Nickel per SAE-AMS-QQ-N-290. Heavy 30 [.76m] Gold Plating also available. Optional suffix: * Contact current rating=3 Amps. No. of pins: H=Heavy Gold on * Insertion Force=180 grams/pin; Withdrawal Force=90 1 to 25 Series collet grams/pin; Normal Force=140 grams/pin; based on a .018 [.46] T=Tin collet/Tin shell dia. test lead. Solder tail pin TL=Tin/Lead collet/ * Operating temperature=221F [105C] Tin & Tin/Lead plating =257F [125C] Gold plating. Tin/Lead shell Plating: * Insertion Force=180 grams/pin; Withdrawal 0=Gold collet/Tin shell Force=90 grams/pin; Normal Force=140 grams/pin; based on a 0TL= Gold collet/Tin/Lead Shell .018 [.46] dia. test lead. * Accepts leads .015-.025 [.38-.64] in dia., .100-.146 1=Gold collet/Gold shell [2.54-3.71] long. MOUNTING CONSIDERATIONS: Pin-Line collet sockets *Suggested PCB hole size=.030 .002 [.76 .05] dia. also available with All tolerances .005 [.13] unless otherwise specified ALL DIMENSIONS: INCHES [MILLIMETERS] wire wrap pins. Consult Data Sheet No. 12014. "A"=NO. OF PINS PER ROW X .100 [2.54] "B"=(NO. OF PINS PER ROW - 1) X .100 [2.54] CONTACT DETAIL http://www.arieselec.com * info@arieselec.com Frenchtown, NJ USA TEL: (908) 996-6841 FAX: (908) 996-3891 abc 12013 REV.D PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED