CPC1330 Single Pole OptoMOS(R) Relay Parameters Peak Blocking Voltage Load Current Max On-resistance Ratings 350 Units VP 120 30 mA Description The CPC1330G is a single-pole normally-open (1-Form-A) Solid State Relay with an enhanced input to output isolation barrier of 5000Vrms. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches. Control of the isolated output is accomplished by means of the highly effective GaAlAs infrared LED at the input. Features * * * * * 5000Vrms Input/Output Isolation 350VP Blocking Voltage 100% Solid State Small 4-Pin Package Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable Approvals * UL Recognized Component: File # E76270 * EN/IEC 60950 Compliant * CSA Certified Component: Certificate # 1172007 Ordering Information Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls Part Number CPC1330G CPC1330GR CPC1330GRTR Description 4-Pin DIP (100/Tube) 4-Pin Surface Mount (100/Tube) 4-Pin Surface Mount (1000/Reel) Pin Configuration + Control - Control 1 4 2 3 Load Load Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON Pb RoHS 2002/95/EC DS-CPC1330-R03 TOFF e3 www.clare.com 1 CPC1330 Absolute Maximum Ratings Parameter Peak Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW/C 2 Derate Linearly 3.00 mW/C Ratings 350 5 50 1 100 550 5000 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameters Output Characteristics @ 25C Load Current Continuous Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance 2 Conditions Symbol Min Typ Max - IL - - 120 t=10ms IL=120mA VL=350V ILPK RON ILEAK - 25 - 350 30 1 IF=0mA, VL=50V, f=1MHz TON TOFF COUT - 25 2 1 - IL=120mA IF=5mA VR=5V IF IF VF IR 0.2 0.9 - 0.33 0.3 1.2 - 2 1.4 10 mA mA V A - CI/O - 3 - pF IF=5mA, VL=10V www.clare.com Units mA A ms pF R03 CPC1330 PERFORMANCE DATA* 35 30 30 20 15 10 1.19 1.21 1.23 25 25.5 26 CPC1330 Typical IF for Switch Dropout (N=50, TA=25C, IL=120mA) 0.29 0.30 0.31 0.32 0.33 0.34 LED Current (mA) Load Current (mA) 15 10 5 15 10 5 0.22 0.23 0.24 0.25 Turn-Off (ms) 0.26 395 Turn-On (ms) 390 385 380 375 370 365 -20 0 20 40 60 Temperature (C) 80 100 10 5 CPC1330 Typical Load Current vs. Temperature CPC1330 Typical Leakage vs. Temperature (Measured Across Pins 3 & 4) 0.30 0.31 0.32 0.85 0.33 0.016 160 0.014 140 0.012 120 100 I F = 10mA 80 I F = 2mA 60 0.002 20 40 60 80 Temperature (C) 100 0 -40 120 CPC1330 Typical Turn-On vs. Temperature (IL=80mA) 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 I F = 5mA I F = 10mA -40 -20 0 20 40 60 Temperature (C) 80 100 1.25 0.006 0.004 0 1.20 0.008 20 -20 0.90 0.010 40 -40 400 15 180 0.27 CPC1330 Typical Blocking Voltage vs. Temperature 20 1.00 1.10 1.15 Turn-On (ms) 0.29 Turn-Off (ms) 0.21 400 LED Current (mA) 0.28 0 0 380 385 390 395 Blocking Voltage (VP) 0 0.27 CPC1330 Typical Turn-Off Time (N=50, TA=25C, IL=120mA, IF=5mA) 20 20 375 CPC1330 Typical Turn-On Time (N=50, TA=25C, IL=120mA, IF=5mA) 25 0 0.35 10 370 Device Count (N) 5 15 26.5 CPC1330 Typical IF for Switch Operation (N=50, TA=25C, IL=120mA) 10 -40 24.5 On-Resistance () 25 25 24 LED Forward Voltage Drop (V) 15 20 0 23.5 20 25 5 1.25 Device Count (N) Device Count (N) 10 0 0 Device Count (N) 15 0 25 Blocking Voltage (VP) 20 5 1.17 30 25 5 CPC1330 Typical Blocking Voltage Distribution (N=50, TA=25C) 35 Leakage (A) 25 CPC1330 Typical On-Resistance Distribution (N=50, TA=25C, IL=120mA) Device Count (N) 35 Device Count (N) Device Count (N) CPC1330 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA) -20 0 20 40 60 Temperature (C) 80 100 CPC1330 Typical Turn-Off vs. Temperature (IL=80mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 I F = 10mA I F = 5mA -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1330 PERFORMANCE DATA* I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 0.4 0.3 0.2 0.1 0 5 10 15 20 25 30 35 40 45 0 50 5 10 15 20 25 30 35 40 45 LED Forward Current (mA) CPC1330 Typical On-Resistance vs. Temperature (IL=80mA, IF=10mA) CPC1330 Typical IF for Switch Operation vs. Temperature (IL=80mA) CPC1330 Typical IF for Switch Dropout vs. Temperature (IL=80mA) 1.2 1.2 30 20 0.8 0.6 0.4 10 0.2 0 0 -40 -20 0 20 40 60 Temperature (C) 80 100 Load Current (A) 0 -100 -3 -2 -1 0 1 Load Voltage (V) 2 3 0.4 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (C) CPC1330 Energy Rating Curve 100 -50 0.6 0 -20 Temperature (C) 50 0.8 0.2 -40 CPC1330 Typical Load Current vs. Load Voltage (TA=25C, IF=5mA) 50 1.0 1.0 40 -150 0.5 LED Forward Current (mA) 50 150 0.6 0 120 0.7 Temperature (C) LED Current (mA) On-Resistance () 60 Load Current (mA) Turn-On (ms) 1.6 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 LED Current (mA) LED Forward Voltage Drop (V) 1.8 1.4 CPC1330 Typical Turn-Off vs. LED Forward Current (IL=120mA) CPC1330 Typical Turn-On vs. LED Forward Current (IL=120mA) Turn-Off (ms) CPC1330 Typical LED Forward Voltage Drop vs. Temperature 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 CPC1330 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 3.30 0.050 (0.130 0.002) 0.991 (0.039) PC Board Pattern (Top View) 0.254 (0.010) 4-Pin DIP ("G" Suffix) 6 - 0.800 DIA. (6 - 0.031 DIA.) 6.350 0.127 (0.250 0.005) 4.572 0.127 (0.180 0.005) 7.620 0.127 (0.300 0.005) PIN 1 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 9 (ALL) 9 (ALL) 0.457 0.076 (0.018 0.003) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 1.651 (0.065) 0.508 (0.020) 3.175 (0.125) Dimensions mm (inches) Recommended PCB Land Pattern 4-Pin Surface Mount ("GR" Suffix) 2.540 0.127 (0.100 0.005) 3.300 0.050 (0.130 0.002) 0.635 0.254 (0.025 0.010) 6.350 0.127 (0.250 0.005) 9.525 (0.375) 8.80 (0.346) 1.60 (0.063) 0.991 (0.039) 4.572 0.127 (0.180 0.005) 3.480 0.076 (0.137 0.003) 0.254 (0.010) 2.540 0.127 (0.100 0.005) 2.287 0.127 (0.090 0.005) R03 2.287 (0.09) 7.620 0.254 (0.300 0.010) PIN #1 9 1 (ALL) 2.540 0.127 (0.100 0.005) 0.95 (0.037) Dimensions mm (inches) 0.102 min / 0.254 max (0.004 min / 0.010 max) www.clare.com 5 CPC1330 MECHANICAL DIMENSIONS Tape and Reel Packaging for 4-Pin Surface Mount Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W = 16.00 (0.630) K0 = 4.20 (0.165) K1 = 3.70 (0.146) P = 12.00 (0.472) A0 = 10.01 (0.394) B0 = 5.00 (0.197) Dimensions mm (inches) Embossed Carrier Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1330-R03 (c)Copyright 2008, Clare, Inc. All rights reserved. Printed in USA. 7/11/08