www.clare.com
DS-CPC1330-R03 1
CPC1330
Single Pole OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Part Number Description
CPC1330G 4-Pin DIP (100/Tube)
CPC1330GR 4-Pin Surface Mount (100/Tube)
CPC1330GRTR 4-Pin Surface Mount (1000/Reel)
Parameters Ratings Units
Peak Blocking Voltage 350 VP
Load Current 120 mA
Max On-resistance 30 Ω
Applications
Features
Description
Approvals
Ordering Information
Pin Configuration
The CPC1330G is a single-pole normally-open
(1-Form-A) Solid State Relay with an enhanced
input to output isolation barrier of 5000Vrms. Clare’s
patented OptoMOS architecture makes available the
optically coupled technology necessary to activate
the output’s efficient MOSFET switches. Control of
the isolated output is accomplished by means of the
highly effective GaAlAs infrared LED at the input.
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• UL Recognized Component: File # E76270
• EN/IEC 60950 Compliant
• CSA Certified Component: Certificate # 1172007
• 5000Vrms Input/Output Isolation
• 350VP Blocking Voltage
• 100% Solid State
• Small 4-Pin Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
Switching Characteristics of
Normally Open (Form A) Devices
1
23
4
+ Control
– Control
Load
Load
CONTROL
ILOAD
10%
90%
TON
TOFF
+
+
www.clare.com
2
CPC1330
R03
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Ratings Units
Peak Blocking Voltage 350 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1100 mW
Total Package Dissipation 2550 mW
Isolation Voltage, Input to Output 5000 Vrms
Operational Temperature -40 to +85 ºC
Storage Temperature -40 to +125 ºC
1 Derate Linearly 1.33 mW/ºC
2 Derate Linearly 3.00 mW/ºC
Electrical absolute maximum ratings are at 25ºC
Absolute Maximum Ratings
Electrical Characteristics
Parameters Conditions Symbol Min Typ Max Units
Output Characteristics @ 25ºC
Load Current
Continuous - IL- - 120
mA
Peak t=10ms ILPK - - 350
On-Resistance IL=120mA RON -2530 Ω
Off-State Leakage Current VL=350V ILEAK -- 1 μA
Switching Speeds
Turn-On IF=5mA, VL=10V TON -- 2 ms
Turn-Off TOFF -- 1
Output Capacitance IF=0mA, VL=50V, f=1MHz COUT -25 - pF
Input Characteristics @ 25ºC
Input Control Current IL=120mA IF- 0.33 2 mA
Input Dropout Current - IF0.2 0.3 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10 μA
Common Characteristics @ 25ºC
Input to Output Capacitance - CI/O -3 - pF
CPC1330
www.clare.com 3
R03
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
35
30
25
20
15
10
5
01.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
CPC1330
Typical LED Forward Voltage Drop
(N=50, TA=25ºC, IF=5mA)
35
30
25
20
15
10
5
0
23.5 24.5 25.5 26.524 25 26
Device Count (N)
CPC1330
Typical On-Resistance Distribution
(N=50, TA=25ºC, IL=120mA)
On-Resistance (Ω)
35
30
25
20
15
10
5
0
370 380 390 400375 385 395
Blocking Voltage (VP)
Device Count (N)
CPC1330
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
0.30 0.32 0.340.29 0.31 0.33 0.35
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
CPC1330
Typical IF for Switch Operation
(N=50, TA=25ºC, IL=120mA)
25
20
15
10
5
0
0.28 0.30 0.320.27 0.29 0.31 0.33
LED Current (mA)
Device Count (N)
CPC1330
Typical IF for Switch Dropout
(N=50, TA=25ºC, IL=120mA)
0.85 1.00 1.15 1.250.90 1.10 1.20
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
CPC1330
Typical Turn-On Time
(N=50, TA=25ºC, IL=120mA, IF=5mA)
0.21 0.23 0.25 0.270.260.240.22
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
CPC1330
Typical Turn-Off Time
(N=50, TA=25ºC, IL=120mA, IF=5mA)
Load Current (mA)
180
160
140
120
100
80
60
40
20
0
-40 -20 0 20 40 60 80 120100
I
F
= 2mA
I
F
= 10mA
CPC1330
Typical Load Current vs. Temperature
Temperature (ºC)
Leakage (μA)
-40
0.016
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
-20 0 20 40 60 80 100
CPC1330
Typical Leakage vs. Temperature
(Measured Across Pins 3 & 4)
Temperature (ºC)
Blocking Voltage (VP)
-40
400
395
390
385
380
375
370
365
-20 0 20 40 60 80 100
Temperature (ºC)
CPC1330
Typical Blocking Voltage
vs. Temperature
IF = 5mA
IF = 10mA
Turn-On (ms)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Temperature (ºC)
CPC1330
Typical Turn-On vs. Temperature
(IL=80mA)
Turn-Off (ms)
-40
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
IF = 5mA
IF = 10mA
CPC1330
Typical Turn-Off vs. Temperature
(IL=80mA)
Temperature (ºC)
www.clare.com
4
CPC1330
R03
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
LED Forward Voltage Drop (V)
CPC1330
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
= 50mA
I
F
= 30mA
I
F
= 20mA
I
F
= 10mA
I
F
= 5mA
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
50
CPC1330
Typical Turn-On vs. LED Forward Current
(IL=120mA)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
CPC1330
Typical Turn-Off vs. LED Forward Current
(IL=120mA)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
CPC1330
Typical On-Resistance vs. Temperature
(IL=80mA, IF=10mA)
On-Resistance (Ω)
Temperature (ºC)
LED Current (mA)
-40
1.2
1.0
0.8
0.6
0.4
0.2
0
-20 0 20 40 60 80 100
CPC1330
Typical IF for Switch Operation
vs. Temperature
(IL=80mA)
Temperature (ºC)
LED Current (mA)
-40
1.2
1.0
0.8
0.6
0.4
0.2
0
-20 0 20 40 60 80 100
CPC1330
Typical IF for Switch Dropout
vs. Temperature
(IL=80mA)
Temperature (ºC)
Load Voltage (V)
Load Current (mA)
150
100
50
0
-50
-100
-150 -3 -2 -1 0 1 2 3
CPC1330
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=5mA)
Time
Load Current (A)
10μs
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
1ms100μs 100ms 1s
10ms 10s 100s
CPC1330
Energy Rating Curve
CPC1330
www.clare.com 5
R03
Manufacturing Information
RoHS
2002/95/EC e3
Pb
MECHANICAL DIMENSIONS
Soldering
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
4-Pin DIP (”G” Suffix) PC Board Pattern (Top View)
Dimensions
mm
(inches)
PIN 1
6.350 ± 0.127
(0.250 ± 0.005)
4.572 ± 0.127
(0.180 ± 0.005)
0.991
(0.039)
9º (ALL)
3.30 ± 0.050
(0.130 ± 0.002)
0.254
(0.010)
9.144 ± 0.508
(0.360 ± 0.020)
7.620 ± 0.254
(0.300 ± 0.010)
7.620 ± 0.127
(0.300 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
6.350 ± 0.127
(0.250 ± 0.005)
9º (ALL)
0.457 ± 0.076
(0.018 ± 0.003)
2.540 ± 0.127
(0.100 ± 0.005) 3.175
(0.125)
0.508
(0.020)
1.651
(0.065)
PIN #1
6.350 ± 0.127
(0.250 ± 0.005)
0.991
(0.039)
9.525
(0.375)
2.540 ± 0.127
(0.100 ± 0.005)
4-Pin Surface Mount (”GR” Suffix)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.254
(0.025 ± 0.010)
0.254
(0.010)
3.300 ± 0.050
(0.130 ± 0.002)
3.480 ± 0.076
(0.137 ± 0.003)
Recommended PCB Land Pattern
Dimensions
mm
(inches)
2.287
(0.09)
8.80
(0.346)
1.60
(0.063)
0.95
(0.037)
9º ± 1º
(ALL)
0.102 min / 0.254 max
(0.004 min / 0.010 max)
4.572 ± 0.127
(0.180 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
2.287 ± 0.127
(0.090 ± 0.005)
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1330-R03
©Copyright 2008, Clare, Inc.
All rights reserved. Printed in
USA.
7/11/08
For additional information please visit our website at: www.clare.com
6
CPC1330
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
Tape and Reel Packaging for 4-Pin Surface Mount Package
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
K0 = 4.20
(0.165)
K1 = 3.70
(0.146)
W = 16.00
(0.630)
A0 = 10.01
(0.394)
P = 12.00
(0.472)
B0 = 5.00
(0.197)
MECHANICAL DIMENSIONS
