MOBO(R) Connectors www.avx.com AVX MOBO(R) Spring Contact Interconnect Solutions Version 13.8 INTERCONNECT Table of Contents BATTERY CONNECTORS SERIES 9155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16 Battery; Standard Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Battery; Reduced Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Battery; Ultra Low Profile Battery; Solderless .......................................................7 ..............................................................9 Battery; 3.0mm Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Battery; 2.5mm Right Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 SINGLE COMPRESSION CONTACT BOARD TO BOARD (BTB) SERIES 70-9155 . . . 17-19 Nominal Working Height 1.00mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Nominal Working Height 1.50mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 SIM CARD CONNECTORS SERIES 9162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-27 Slide-In SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 SIM Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 SIM Connector with Locking Latch SIM/microSD Micro Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 BOARD TO BOARD, SERIES 9158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-35 SOLO Stacker, 9158 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Staggered SOLO Stacker, 9188 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Ultra Low Profile Stacker, 9258 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 I/O CONNECTORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-48 Standard I/O, 15 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Standard I/O, 19 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Reduced Size I/O, 9257 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Mini I/O, 9257 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications. 1 9155 Standard Battery GENERAL DESCRIPTION The standard battery connector is specifically designed for mobile equipment. The connectors are available in 3, 4 and 5 contact positions all on a 2.50mm pitch. The insulator height provides a 3mm spacing, with various contact nose heights from 1.20mm to 2.60mm, to provide spacing options to the end user. All contacts are stamped and are rated to 3A, with Gold plating. Parts are supplied in tape and reel for automatic pick and place. Optional retaining brackets are available to provide greater strength when connected to the PCB. Whatever your requirements, the 9155 series Battery Connector can also be customized to suit your applications. APPLICATIONS KEY FEATURES AND BENEFITS * * * * * * * * * Mobile Phones PDA Medical PMR Industrial 3 Way Battery Connector 7.50 (0.295) 4 Way Battery Connector 2 PITCHES @ 2.5 = 5.00 (0.098 = 0.197) 1.25 (0.049) 1.25 (0.049) Suitable for 5000 mechanical cycles. Variety of contact heights offered to suit different mechanical designs. Connectors can be end to end stackable. RoHS Compliant available. 10.00 (0.394) 1.40 (0.055) REF 1.25 (0.049) 1.25 (0.049) 0.00 +0.10 -0 (0.00 +0.004 -0) 2 8.00 (0.315) 1.40 (0.055) REF 3.00 0.08 (0.118 0.003) 1.40 (0.055) REF 3.00 0.08 (0.118 0.003) 3.05 (0.120) TYP CONTACT TAILS TO BE WITHIN A 0.1 (0.004) COPLANARITY RANGE WHEN INSULATOR IS SITTING ON DATUM FACE. 0.00 +0.10 -0 (0.00 +0.004 -0) 4 PITCHES @ 2.5 = 10.00 (0.098 = 0.394) 1.25 (0.049) 1.25 (0.049) 8.00 (0.315) 3.05 (0.120) TYP CONTACT TAILS TO BE WITHIN A 0.1 (0.004) COPLANARITY RANGE WHEN INSULATOR IS SITTING ON DATUM FACE. 12.50 (0.492) 3 PITCHES @ 2.5 = 7.50 (0.098 = 0.295) 8.00 (0.315) 3.00 0.08 (0.118 0.003) 5 Way Battery Connector 3.05 (0.120) TYP CONTACT TAILS TO BE WITHIN A 0.1 (0.004) COPLANARITY RANGE WHEN INSULATOR IS SITTING ON DATUM FACE. 0.00 +0.10 -0 (0.00 +0.004 -0) 9155 Standard Battery 3 Way PCB Board Layout 3.60 (0.142) 4 Way PCB Board Layout BRACKET PAD AREA (ELECTRICALLY ISOLATED) 3.60 (0.142) BRACKET PAD AREA (ELECTRICALLY ISOLATED) 2.50 (0.098) 2.50 (0.098) 3.95 (0.156) 7.30 (0.287) 7.30 (0.287) 3.95 (0.156) PAD 1.50 X 1.50 (0.059 X 0.059) (3 POSITIONS) 2 PITCHES @ 2.5 = 5.00 (0.098 = 0.197) PAD 1.50 X 1.50 (0.059 X 0.059) (4 POSITIONS) 3 PITCHES @ 2.50 = 7.50 (0.098 = 0.295) 5 Way PCB Board Layout 2.50 (0.098) BRACKET PAD AREA (ELECTRICALLY ISOLATED) 3.60 (0.142) 7.30 (0.287) 3.95 (0.156) PAD 1.50 X 1.50 (0.059 X 0.059) (5 POSITIONS) 4 PITCHES @ 2.5 = 10.00 (0.098 = 0.394) HOW TO ORDER 00 9155 003 00 1 01 Prefix 00 = Standard 58 = Special Series No of Ways 3 = 003 4 = 004 5 = 005 Standard Battery Connector 00 = Standard Force Contact Height 1 = 1.20 (0.047) / 1.50 (0.059) 2 = 1.80 (0.071) / 2.10 (0.083) 3 = 2.30 (0.091) / 2.60 (0.102) Bracket 01 = With Bracket 6 Plating Option 6 = 0.4m Selective Gold, Pure Tin Tail 8 = 0.8m Selective Gold, Pure Tin Tail 3 9155 Size Reduced Battery Connector GENERAL DESCRIPTION The newest product in AVX's Interconnect family of battery connectors saves 50% in volume over the initial 9155 series compression connectors as illustrated in the photograph. These connectors are rated at a full 3 amps per contact on 2.5mm centers. Sizes range from 2 positions through 5 positions and are end to end stackable. APPLICATIONS * * * * Cellular Phones Handheld Devices Industrial Modules Medical Electronics KEY FEATURES AND BENEFITS * 2.4mm insulator height * 3 amps/contact * Large SMT mounting area for positive mechanical attachment * 5k mating cycles * End-to-end stackable HOW TO ORDER 00 9155 Prefix Series 003 201 No. of Ways Reduced Size Battery Connector Code No. of Ways 002 2 003 3 004 4 005 5 4 Reel Qty Packing Qty 2000 2000 2000 2000 2000 2000 2000 2000 Code Description 201 Reduced Size Battery Connector XXX Plating Option Code Description 006 0.4m Selective Gold, Pure Tin Tail 008 0.8m Selective Gold, Pure Tin Tail 9155 Size Reduced Battery Connector 2 Way Reduced Battery Connector 5.00 (0.197) 5.30 (0.209) 3 Way Reduced Battery Connector 7.50 (0.295) 5.30 (0.209) 2.50 (0.098) 2.50 (0.098) 0.90 (0.035) 0.10 (0.004) 2.40 (0.094) 2.40 (0.094) 0.90 (0.035) 5.00 (0.197) 1.2 (0.047)/ 1.5 (0.059) SECTION X - X SHOWING CONTACTS DEFLECTED TO 2.5mm 4.00 (0.157) 1.2 (0.047)/ 1.5 (0.059) CONTACT TAILS TO BE WITHIN 0.13 COPLANARITY RANGE CONTACT TAILS TO BE WITHIN 0.13 COPLANARITY RANGE 4.00 (0.157) 0.10 (0.004) 5.00 (0.197) SECTION X - X SHOWING CONTACTS DEFLECTED TO 2.5mm 4.92 (0.194) REF SECTION X - X 4.92 (0.194) REF SECTION X - X 4 Way Reduced Battery Connector 10.00 (0.394) 5.30 (0.209) 5 Way Reduced Battery Connector 12.50 (0.492) 5.30 (0.209) 2.50 (0.098) 2.50 (0.098) 0.10 (0.004) 2.40 (0.094) 0.90 (0.035) 2.40 (0.094) 0.90 (0.035) 0.10 (0.004) 5.00 (0.197) 5.00 (0.197) CONTACT TAILS TO BE WITHIN 0.13 COPLANARITY RANGE SECTION X - X SHOWING CONTACTS DEFLECTED TO 2.5mm 4.00 (0.157) 4.92 (0.194) REF SECTION X - X 1.2 (0.047)/ 1.5 (0.059) 4.00 (0.157) 1.2 (0.047)/ 1.5 (0.059) CONTACT TAILS TO BE WITHIN 0.13 COPLANARITY RANGE SECTION X - X SHOWING CONTACTS DEFLECTED TO 2.5mm 4.92 (0.194) REF SECTION X - X 5 9155 Size Reduced Battery Connector 2 Way Reduced Battery Connector PCB Layout 3 Way Reduced Battery Connector PCB Layout 1.50 (0.059) TYP PAD AREA MAY BE REDUCED AT CUSTOMER DISCRETION DOTTED LINE REPRESENTS THE OUTSIDE DIMENSIONS OF THE INSULATOR 4 Way Reduced Battery Connector PCB Layout 5.00 (0.197) DOTTED LINE REPRESENTS THE OUTSIDE DIMENSIONS OF THE INSULATOR 5 Way Reduced Battery Connector PCB Layout 1.50 (0.059) TYP 0.35 (0.014) 1.50 (0.059) TYP 5.00 (0.197) 0.35 (0.014) 5.30 (0.209) 5.00 (0.197) 5.30 (0.209) 2.20 (0.087) 2.20 (0.087) 6 0.35 (0.014) 5.00 (0.197) 1.50 (0.059) TYP 0.35 (0.014) 5.30 (0.209) 5.00 (0.197) 2.50 (0.098) PAD AREA MAY BE REDUCED AT CUSTOMER DISCRETION PAD AREA MAY BE REDUCED AT CUSTOMER DISCRETION 5.30 (0.209) 2.20 (0.087) 2.20 (0.087) 10.00 (0.394) 7.50 (0.295) DOTTED LINE REPRESENTS THE OUTSIDE DIMENSIONS OF THE INSULATOR PAD AREA MAY BE REDUCED AT CUSTOMER DISCRETION DOTTED LINE REPRESENTS THE OUTSIDE DIMENSIONS OF THE INSULATOR 9155 Ultra-Low Profile Battery GENERAL DESCRIPTION The AVX Interconnect group has released a new ultra-low profile 3 amp per contact connector for battery pack or slide-in module applications. The compressed "Z" axis height of 1.3mm leads the industry from a profile standpoint. The initial product is in a 2 & 3 position configuration with other sizes expected to follow. The connector has an integral end block to act as a mechanical stop. APPLICATIONS * * * * KEY FEATURES AND BENEFITS Cellular Phones Handheld Devices Industrial Modules Medical Electronics * * * * Ultra-Low Profile 3 amps/contact Integral End Stop 5k mating cycles HOW TO ORDER Prefix Series 003 101 No. of Ways Low Profile Battery Connector Code No. of Ways Qty. Per Reel 002 2 1500 003 3 1200 2 Way Low Profile Battery Connector Description Operating Height 101 Low Profile Battery Connector 1.30 (0.051) Code Description 006 0.4m Selective Gold, Pure Tin Tail 008 0.8m Selective Gold, Pure Tin Tail 3 Way Low Profile Battery Connector 0.84 (0.033) 2.00 (0.079) 2.50 (0.098) 1.20 (0.047) Plating Option Code 1.20 (0.047) DOTTED LINE IS CONTACT CENTER LINE DOTTED LINE IS CONTACT CENTER LINE 2.00 (0.079) 9.10 (0.358) 7.60 (0.299) 5.10 (0.201) 6.60 (0.260) 0.84 (0.033) XXX 5.00 (0.197) 9155 SECTION A-A CONTACT UNDEFLECTED CONTACT SHOWN WITH STOP RESTING ON PCB BATTERY PACK INSERTION DIRECTION SECTION A-A CONTACT UNDEFLECTED 0.70 (0.028) 7.57 (0.298) 1.30 (0.051) MAX 2.75 (0.108) 0.70 (0.028) 7.57 (0.298) 2.60 (0.102) BATTERY PACK INSERTION DIRECTION O 2.00 PICK AND PLACE AREA OR RECTANGLE 1.30 (0.051) MAX 2.60 (0.102) 2.75 (0.108) O 2.00 PICK AND PLACE AREA OR RECTANGLE 2 EQUAL PITCHES @ 2.50 (0.098) = 5.00 (0.197) 00 CONTACT SHOWN WITH STOP RESTING ON PCB 7 9155 Ultra-Low Profile Battery 2.20 (0.087) 10.00 (0.394) 11.95 (0.470) 1.50 (0.059) 2.20 (0.087) DOTTED LINE IS CONTACT CENTER LINE 2.50 (0.089) TYP 3 Way Low Profile Battery Connector PCB Layout 0.60 (0.024) 2.50 (0.089) 2.20 (0.087) 0.60 (0.024) 1.50 (0.059) 2 Way Low Profile Battery Connector PCB Layout 2.20 (0.087) 10.00 (0.394) 11.95 (0.470) 8 DOTTED LINE IS CONTACT CENTER LINE 9155 MOBO(R) Solderless Battery Connectors GENERAL DESCRIPTION 4.25 (0.167) 2 7 6.00 (0.236) 3 X 3.0 PITCHES=9.0 (3 X 0.118 PITCHES=0.354) +0 11.81 (0.465) 14.50 -0.1 +0 (0.571 -0.004) 4.40 (0.173) 2 TYP (0.079 TYP) 2.75 (0.108) 3 X 3.0 PITCHES=9.0 (3 X 0.118 PITCHES=0.354) +0 +0 1.00 -0.05 (0.040 -0.002) R1 TYP 1.60 (0.063) 9.90 0.08 (0.039 0.003) EJECTOR FACE (SEE NOTE 8) 1.60 (0.063) CONNECTOR OUTLINE 2.00 (0.079) 1.00 (0.040) 58 9155 004 000 020 2.95 (0.116) 1.20 (0.047) As an addition to our range of Battery connectors we have added a solderless termination option. This option has the termination area gold plated and the contact form is compression to the PCB and to the Battery which is used in the end equipment. Rated at 3 Amps and 5,000 operations (the same as the SMT version). These battery connectors compliment the existing standard range of RoHS compliant components giving the designer an added option of the solderless termination. When these connectors are held in place by the casing of the end equipment, the connection to the PCB is achieved by compressing the connector contacts against the PCB and against the actual battery. It is the housing which maintains the connection. 2.75 (0.108) R1 M 0.040) R1 MAX TYP 5.70 (0.224) 4.4 (0.173) SECTION AA SUGGESTED PCB LAYOUT 2.95 (0.116) R 0.70 (0.028) 2.77 (0.109) 2 3.55 (0.140) 5.05 0.15 (0.199 0.006) 4.54 (0.179) 0.5 (0.020) A A +0.03 0.50 -0.1 +0.012 (0.020 -0.004) R1 MAX TYP A 1.02 (0.040) 2.40 (0.094) FULLY DEFLECTED CONTACT 10.00 (0.394) 0.80 X 45 (0.031 X 45) 0.80 (0.031) 0.69 (0.027) TAIL PCB LAYOUT 9.00 (0.354) 1.00 (0.039) 7.63 (0.300) 1.25 (0.049) 0.3 (0.012) 0.86 (0.034) X 3 POSNs 6.50 (0.256) 0.80 (0.031) A 7.20 (0.283) 0.85 (0.033) 1.20 (0.047) 1.00 (0.039) 3.50 (0.138) 0.35 X 45 (0.014 X 45) 2.50 (0.098) 6.00 (0.236) 0.35 X 45 (0.014 X 45) 3.00 (0.118) 6.50 (0.256) 58 9155 003 000 053 1.25 (0.049) 2.22 (0.087) 4.50 (0.177) CONNECTOR OUTLINE 0.70 (0.028) 0.50 (0.020) 9.00 (0.354) 2 PITCHES @ 3.00 = 6.00 (0.118 = 0.236) 0.50 (0.098) 1.80 X 2.80 (0.071 X 0.110) GOLD PADS 9 9155 MOBO(R) 3.0mm Pitch Right Angle Battery Connectors GENERAL DESCRIPTION A further addition to the battery connector range offered by AVX is a 90 degree version. On a 3mm pitch, offered in 2 to 5 contact positions and rated as with all of the battery range at 3 amps. The connector's design is small and compact to minimize its profile yet stable while having a contact point 4.61mm above the PCB. The stability comes from the addition of extra SMT anchor brackets that are in between the SMT contact pads and both at the front of the connector and within the row of the contact SMT pads. As with the other 9155 series of battery connectors offered by AVX the 90 degree version is rated at 3 amps and 5000 mating cycles, RoHS compliant and using high temperature plastic enables the connectors to be processed at up to 260C. APPLICATIONS FEATURES AND BENEFITS * * * * * Simple designed spring contact * End to end stackable for larger pin counts * Additional contact anchor brackets to added stability on the PCB * Robust to shock and vibration * Selectively plated contact area Mobile phones Digital music players Hand held terminals Data terminals or any other small portable device HOW TO ORDER 00 9155 Prefix Series 002 301 No. of Ways Right Angle Battery Connector Code No. of Ways 002 2 003 3 004 4 005 5 10 Code Description 301 Right Angle 3.00mm Battery Connector XXX Plating Option Code Description 006 0.4m Selective Gold, Pure Tin Tail 008 0.8m Selective Gold, Pure Tin Tail 9155 MOBO(R) 3.0mm Pitch Right Angle Battery Connectors 2 Way Right Angle Battery Connector 1.19 - 1.49 (0.047 - 0.059) 6.00 (0.236) 3 Way Right Angle Battery Connector 1.19 - 1.49 (0.047 - 0.059) 0.90 (0.035) NOSE WIDTH 4.64 (0.183) ANCHOR BRACKET 6.00 (0.236) 0.90 (0.035) NOSE WIDTH 4.64 (0.183) ANCHOR BRACKET 1.25 (0.049) TAIL WIDTH 1.00 (0.039) 1.00 (0.039) 3.23 (0.127) 0 90 (0 035) 5.90 (0.232) 3.23 (0.127) 1.25 (0.049) TAIL WIDTH 8.90 (0.350) 3.00 (0.118) 2 PITCHES @ 3.00 (0.118) = 6.00 (0.236) 0.05-0.23 (0.002-0.009) 0.05-0.23 (0.002-0.009) CONTACT AND BRACKET TAILS TO BE WITHIN 0.10 COPLANARITY RANGE mm (inches) mm (inches) 4 Way Right Angle Battery Connector 1.19 - 1.49 (0.047 - 0.059) 6.00 (0.236) 3.23 (0.127) 5 Way Right Angle Battery Connector 1.19 - 1.49 (0.047 - 0.059) 0.90 (0.035) NOSE WIDTH 4.64 (0.183) 1.00 (0.039) ANCHOR BRACKET 6.00 (0.236) 3.23 (0.127) ANCHOR BRACKET 1.25 (0.049) TAIL WIDTH 14.90 (0.587) 3 PITCHES @ 3.00 (0.118) = 9.00 (0.354) 4 PITCHES @ 3.00 (0.118) = 12.00 (0.472) 0.05-0.23 (0.002-0.009) CONTACT AND BRACKET TAILS TO BE WITHIN 0.10 COPLANARITY RANGE 0.90 (0.035) NOSE WIDTH 4.64 (0.183) 1.00 (0.039) 1.25 (0.049) TAIL WIDTH 11.90 (0.469) mm (inches) CONTACT AND BRACKET TAILS TO BE WITHIN 0.10 COPLANARITY RANGE 0.05-0.23 (0.002-0.009) mm (inches) CONTACT AND BRACKET TAILS TO BE WITHIN 0.10 COPLANARITY RANGE 11 9155 MOBO(R) 3.0mm Pitch Right Angle Battery Connectors 2 Way Right Angle Battery Connector PCB Layout 3.46 (0.136) 3 Way Right Angle Battery Connector PCB Layout 3.00 (0.118) PURE TIN PAD 1.25 x 1.35 (0.049 x 0.053) 1 POSITION 3.46 (0.136) PURE TIN PAD 0.90 x 1.00 (0.035 x 0.039) 1 POSITION PURE TIN PAD 1.25 x 1.35 (0.049 x 0.053) 2 POSITIONS PURE TIN PAD 0.90 x 1.00 (0.035 x 0.039) 2 POSITIONS 0.50 (0.020) 3.00 (0.118) 1.50 (0.059) PURE TIN PADS 1.50 x 1.00 (0.059 x 0.039) 2 POSITIONS 2 PITCHES @ 3.00 (0.118) = 6.00 (0.236) PURE TIN PADS 1.50 x 1.00 (0.059 x 0.039) 3 POSITIONS mm (inches) mm (inches) 4 Way Right Angle Battery Connector PCB Layout 5 Way Right Angle Battery Connector PCB Layout 2 PITCHES @ 3.00 (0.118) = 6.00 (0.236) 3.46 (0.136) PURE TIN PAD 1.25 x 1.35 (0.049 x 0.053) 3 POSITIONS PURE TIN PAD 1.25 x 1.35 (0.049 x 0.053) 4 POSITIONS 3 PITCHES @ 3.00 (0.118) = 9.00 (0.354) 3.46 (0.136) PURE TIN PAD 0.90 x 1.00 (0.035 x 0.039) 3 POSITIONS 1.50 (0.059) 4 PITCHES @ 3.00 (0.118) = 9.00 (0.354) mm (inches) 12 PURE TIN PAD 0.90 x 1.00 (0.035 x 0.039) 4 POSITIONS PURE TIN PADS 1.50 x 1.00 (0.059 x 0.039) 4 POSITIONS 1.50 (0.059) 4 PITCHES @ 3.00 (0.118) = 12.00 (0.472) mm (inches) PURE TIN PADS 1.50 x 1.00 (0.059 x 0.039) 5 POSITIONS 9155 MOBO(R) 2.5mm Pitch Right Angle Battery Connector GENERAL DESCRIPTION AVX extends the battery connector range with the addition of a low profile 2.5mm pitch right angle connector. This connector is offered in 2 to 5 positions and is rated at 3 amps. The connector's design is small and compact to minimize its profile yet functionally stable having a contact point at 2.20mm above the PCB. The unique design of this stamped contact allows for a maximum insulator height of 4.0mm which makes it size compatible with more expensive pogo pin style battery connectors. The complete family of battery connectors from AVX offer all of the same advantages; Beryllium Copper base material for enhanced contact performance, a full 3 amp current rating, selective gold plating for 5000 mating cycles and high temperature plastic for RoHS soldering. APPLICATIONS KEY FEATURES AND BENEFITS * Mobile Phones * Digital Music Players * Any Handheld Devices * * * * * Reliable stamped contact with coined nose Full 1.5mm nose deflection for large operating range Two anchor tabs for mechanical stability 5000 cycle durability rating Minimized X, Y and Z package dimensions HOW TO ORDER 00 9155 Prefix Series 002 541 XXX No. of Ways Right Angle Battery Connector Plating Option Code No. of Ways 002 2 003 3 004 4 005 5 Code 541 Description Right Angle 2.5mm Battery Connector Code Description 006 0.4m Selective Gold, Pure Tin Tail 008 0.8m Selective Gold, Pure Tin Tail 13 9155 MOBO(R) 2.5mm Pitch Right Angle Battery Connector 2 Way Right Angle Battery Connector 7.50 (0.295) 6.50 (0.256) 1.00 (0.039) TYP CONTACT NOSE RETAINED ANTI-SNAG FEATURE 4.50 (0.177) 4.00 (0.157) DEFLECTED CONNECTOR 1.40 (0.055) TYP 2.50 (0.098) 1.50 (0.059) NOSE TRAVEL UNDEFLECTED CONTACT 2.00 (0.079) 0.10 0.10 (0.004 0.004) CONTACT TO BASE OF INSULATOR 3.80 (0.150) 2.10 (0.083) COPLANARITY 0.10 (0.004) Maximum 3 Way Right Angle Battery Connector 10.0 (0.394) 9.00 (0.354) 1.00 (0.039) TYP 4.50 (0.177) 4.00 (0.157) CONTACT NOSE RETAINED ANTI-SNAG FEATURE DEFLECTED CONNECTOR 1.40 (0.055) TYP 2 PITCHES @ 2.50 = 5.00 (0.098 = 0.197) 1.50 (0.059) NOSE TRAVEL UNDEFLECTED CONTACT 2.00 (0.079) 3.80 (0.150) 2.10 (0.083) COPLANARITY 0.10 (0.004) Maximum 14 0.10 0.10 (0.004 0.004) CONTACT TO BASE OF INSULATOR 9155 MOBO(R) 2.5mm Pitch Right Angle Battery Connector 4 Way Right Angle Battery Connector 12.5 (0.492) 11.5 (0.453) 1.00 (0.039) TYP 4.50 (0.177) 4.00 (0.157) CONTACT NOSE RETAINED ANTI-SNAG FEATURE DEFLECTED CONNECTOR 1.40 (0.055) TYP 3 PITCHES @ 2.50 = 7.50 (0.098 = 0.295) 1.50 (0.059) NOSE TRAVEL UNDEFLECTED CONTACT 2.00 (0.079) 0.10 0.10 (0.004 0.004) CONTACT TO BASE OF INSULATOR 3.80 (0.150) 2.10 (0.083) COPLANARITY 0.10 (0.004) Maximum 5 Way Right Angle Battery Connector 15.0 (0.591) 14.0 (0.551) 1.00 (0.039) TYP CONTACT NOSE RETAINED ANTI-SNAG FEATURE 4.50 (0.177) 4.00 (0.157) DEFLECTED CONNECTOR 1.40 (0.055) TYP 4 PITCHES @ 2.50 = 10.0 (0.098 = 0.394) 1.50 (0.059) NOSE TRAVEL UNDEFLECTED CONTACT 2.00 (0.079) 3.80 (0.150) 0.10 0.10 (0.004 0.004) CONTACT TO BASE OF INSULATOR 2.10 (0.083) COPLANARITY 0.10 (0.004) Maximum 15 9155 MOBO(R) 2.5mm Pitch Right Angle Battery Connector 2 Way Right Angle Battery Connector PCB Layout 3 Way Right Angle Battery Connector PCB Layout 8.80 (0.346) 6.30 (0.248) 0.50 (0.020) 2 PADS 1.30 x 1.00 (0.051 x 0.039) 2.50 (0.098) 0.50 (0.020) 2 PITCHES @ 2.50 = 5.00 (0.098 = 0.197) 2.15 0.15 (0.006) (0.085) 2.15 0.15 (0.006) (0.085) 4.00 3.45 (0.157) (0.136) 2 PADS 1.50 x 2.15 (0.059 x 0.085) 4.00 3.45 (0.157) (0.136) 2 PADS 1.50 x 2.15 (0.059 x 0.085) CONNECTOR OUTLINE CONNECTOR OUTLINE AREA TO BE KEPT CLEAR FROM TRACKS/EXPOSED COPPER 4.50 (0.177) 6.50 (0.256) 7.00 (0.276) 9.00 (0.354) 4 Way Right Angle Battery Connector PCB Layout 11.3 (0.445) 3 PITCHES @ 2.50 = 7.50 (0.098 = 0.295) 0.50 (0.020) 4 PADS 1.30 x 1.00 (0.051 x 0.039) 2.15 0.15 (0.006) (0.085) 4.00 3.45 (0.157) (0.136) 2 PADS 1.50 x 2.15 (0.059 x 0.085) CONNECTOR OUTLINE 9.50 (0.374) 11.5 (0.453) AREA TO BE KEPT CLEAR FROM TRACKS/EXPOSED COPPER 5 Way Right Angle Battery Connector PCB Layout 13.8 (0.543) 4 PITCHES @ 2.50 = 10.0 (0.098 = 0.394) 0.50 (0.020) 5 PADS 1.30 x 1.00 (0.051 x 0.039) 0.15 (0.006) 2.15 (0.085) 4.00 3.45 (0.157) (0.136) 2 PADS 1.50 x 2.15 (0.059 x 0.085) CONNECTOR OUTLINE 12.0 (0.472) 14.0 (0.551) 16 2 PADS 1.30 x 1.00 (0.051 x 0.039) AREA TO BE KEPT CLEAR FROM TRACKS/EXPOSED COPPER AREA TO BE KEPT CLEAR FROM TRACKS/EXPOSED COPPER Single Compression Contact: Board-to-Board (BTB) Series 70-9155 Designers for ruggedized connectors to meet harsh environments continue to look for new products which will reduce size and cost without jeopardizing performance. The new Ultra-Low Profile (ULP) compression contact from AVX surface mounts to a PCB and provides a reliable compression connection to the mating board, even under extreme shock and vibration applications. With over 20 years of 1-Piece compression contact experience, this innovative contact offers full connector performance functionality at the individual contact level. Thus, allowing single contacts to be placed in any location or position on a PCB. The high force beryllium copper contact is gold plated to maximize reliability and signal integrity. The current offering has two contacts with nominal heights of 1.0mm and 1.5mm. Add in the "Z" axis tolerance range and the compressed height covers 0.75mm up to 1.75mm. The contacts are supplied in tape and reel for easy SMT placement. APPLICATIONS FEATURES AND BENEFITS * Industrial/Ruggedized handheld or portable devices * BTB connection for any traditional power or signal application * Ground connections between PCB's or housings * Reliable gold plated Beryllium Copper contacts for high cycle life and signal integrity up to 1000 cycles * Tape and reel packaged for automated SMT placement * Sweeping beam design for pluggable/module applications * Three gold plating options to match end product environmental or expected life requirements ELECTRICAL ENVIRONMENTAL MECHANICAL * Current Rating: 3 Amps * Voltage Rating: Based on placement distance * Operating Temperature: -40C to +125C * Contact Material: Beryllium Copper * Contact Plating: Gold over Nickel * Durability: 50, 500 and 1000 cycles HOW TO ORDER 70 9155 001 Prefix Series Number of Ways 6XX 00X Contact Description Nominal Code Operating Height 610 1.00mm 615 1.50mm Contact Operating Height Range 0.75mm to 1.25mm 1.25mm to 1.75mm Contact Description Gold Code Thickness 004 0.1m 006 0.4m 008 0.8m Description Nickel under Plate, Gold on Nose Tin on Remainder Nickel under Plate, Gold on Nose Tin on Remainder Nickel under Plate, Gold on Nose Tin on Remainder Availability Standard Special Order Special Order 17 Single Compression Contact: Board-to-Board (BTB) Series 70-9155 70-9155-001-610-006 NOMINAL WORKING HEIGHT 1.00MM FULLY DEFLECTED CONTACT SUGGESTED MATING PCB LAYOUT SUGGESTED SMT PCB LAYOUT 18 NOTES: 1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM. 2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND APPLICATIONS NOTES 201-01-154. 3. MATERIAL: COPPER ALLOY 0.2MM THICK. 4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000. 5. OUTLINE OF CONNECTOR, ORIENTATION END "A". 6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN APPLICATION NOTES. 7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS. 8. SMT PADS PLATED TIN. 9. MATING PAD PLATED GOLD OVER NICKEL. PACKING DETAILS Single Compression Contact: Board-to-Board (BTB) Series 70-9155 70-9155-001-610-006 NOMINAL WORKING HEIGHT 1.50MM FULLY DEFLECTED CONTACT SUGGESTED MATING PCB LAYOUT SUGGESTED SMT PCB LAYOUT NOTES: 1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM. 2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND APPLICATIONS NOTES 201-01-154. 3. MATERIAL: COPPER ALLOY 0.2MM THICK. 4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000. 5. OUTLINE OF CONNECTOR, ORIENTATION END "A". 6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN APPLICATION NOTES. 7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS. 8. SMT PADS PLATED TIN. 9. MATING PAD PLATED GOLD OVER NICKEL. PACKING DETAILS 19 9162 Slide-In SIM Card Connector GENERAL DESCRIPTION The standard SIM connector is specifically designed for handheld devices requiring secure subscriber identification. Following on from the introduction of our standard SIM block with an offering of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding another standard to the 9162 series SIM connectors, the slide-in SIM. Unlike SIM blocks which require SIM card guides to aid insertion, removal and retention of the SIM card, the slide-in SIM has guides as part of the connector mold design. Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles. Our contact design is specifically rounded to avoid any possible damage during and after card insertion to the card itself, assuming normal use. The design also incorporates protection features to avoid contact damage during this operation such as contact snagging. Please contact the appropriate sales office for further details of this service. KEY FEATURES AND BENEFITS * Produced for use with mini SIM cards. * The insulator is molded from high temperature plastic enabling the connector to be used in convection or infrared soldering processes. * Supplied on tape and reel packaging for pick and place assembly. * The all plastic design, assuming normal use prevents damage to the SIM card on insertion. * Optional SMT contact size: Standard SMT contact size - 1.60mm x 1.60mm Narrow SMT contact size - 1.05mm x 0.60mm * RoHS Compliant available. Standard SMT Contact Layout Narrow SMT Contact Layout 12.6 (0.496) 11.6 (0.457) 10.06 (0.396) 9.06 (0.357) 7.52 (0.296) 6.52 (0.257) 13.0 (0.512) 11.2 (0.441) 10.46 (0.412) 8.66 (0.341) 7.92 (0.312) 6.12 (0.241) 10.36 (0.408) 12.16 1.74 (0.479) (0.069) 15.7 (0.618) 16.4 (0.646) 20 0.06 (0.002) 10.35 (0.407) 11.85 1.75 (0.467) (0.069) 15.7 (0.618) 16.4 (0.646) 0.25 (0.010) 9162 Slide-In SIM Card Connector Connector Height 1.75mm 16.4 (0.646) 1.75 (0.069) CONNECTOR HEIGHT A 11.4 (0.449) Z 5.10 - 5.60 (0.201 - 0.220) H 12.9 - 13.4 (0.508 - 0.528) 12.02 (0.473) 0.20 H 15.7 (0.618) 15.2 (0.598) T +0.00 /+0.15 (0.000 / +0.006) 0.60 0.10 (0.024 / +0.004) T Z 6.05 (0.238) 4.85 (0.191) B SECTION Z-Z A B Standard Narrow 1.46 (0.057) 1.05 (0.041) 1.60 (0.063) 0.60 (0.024) 0.93 (0.037) 15.1 (0.594) 0.60 (0.024) SECTION T-T HOW TO ORDER 00 9162 006 Prefix 00 = Standard 58 = Special Series No. of Contacts 006 = 6 2X 6 SIM Type 20 = Standard SMT Footprint 21 = Narrow SMT Footprint XXX Plating Options Selective Gold, Pure Tin Tail Connector Height XXX refers to Connector Height 175 = 1.75mm stack height 21 9162 SIM Card Block GENERAL DESCRIPTION The standard SIM connector is specifically designed for handheld devices requiring secure subscriber identification. The connectors are available in a standard 6 pin configuration on a 2.54mm pitch with a 0.8mm height. Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical cycles. Our contact design is specifically rounded to avoid any possible damage during and after card insertion to the card itself, assuming normal use. The design also incorporates protection features to avoid contact damage during this operation such as contact snagging. Please contact the appropriate sales office for further details. KEY FEATURES AND BENEFITS * Produced for use with both full ISO cards and mini SIM cards. * The insulator is molded from high temperature plastic enabling the connector to be used in convection or infrared soldering processes. * Supplied on tape and reel packaging for pick and place assembly. * RoHS Compliant. 0.8mm PCB Pad Layout 2 PITCHES @ 2.540 = 5.08 (0.100 = 0.200) PCB PADS (6 POSITIONS) 1.00 (0.039) 1.10 (0.043) TYP 0.77 (0.030) TYP 1.00 (0.039) 15.20 (0.598) 22 9162 SIM Card Block Connector Height 0.8mm 0.60 (0.024) 0.80 (0.031) 8.64 (0.340) 12.10 (0.476) ALL CONTACT TAILS WITHIN 0.10mm COPLANARITY TOLERANCE 15.00 (0.591) 1.00 (0.039) TYP 0.19 (0.007) TYP 0.670 (0.026) REF TYP 2 PITCHES @ 2.540 = 5.08 (0.100 = 0.200) 7.62 +0.25 -0 (0.300 +0.010 -0) Illustration of Pin Configuration PIN 1 PIN 1 HOW TO ORDER 00 9162 006 006 Prefix Series Number of Contacts SIM Type 006 = Selective Gold, Pure Tin Tail 080 Connector Height 080 = 0.8mm stack height 23 9162 SIM Connector with Locking Latch GENERAL DESCRIPTION For 9162 Slide-IN & 9162 SIM/microSD * Accepts GSM Standard 11.11 cards * Secure locking latch mechanism * Robust, good resistance against shock and vibration * SIM Installed Height - 1.50mm * Polarized to eliminate improper insertion of the card KEY FEATURES AND BENEFITS * * * * SMT with locking hinged guide 2.50mm connector height Selective gold on mating surface/tin on solder tails Tape and reel packaging HOW TO ORDER 00 9162 006 Prefix Series Number of Contacts SIM Type 30 = SMT with Locking Hinged SIM Guide 3.30 (0.130) SIM Height Height of SIM Card: 1.50 (0.059) Suggested PCB Layout SIM PAD NUMBER TO GSM 11.11 (ISO 7810) 9.64 17.2 (0.380) (0.677) CONNECTOR PROFILE 13.3 (0.524) 3.65 (0.144) Contact Plating Selective Gold on Contact Surface and Tin on Solder Tails 30.0 (1.181) REF OPEN ELCO SIMLOCK 150 O3.00 (0.118) PICK UP AREA OPEN 7.90 0.95 (0.311) 5.08 (0.200) (0.037) 2.54 7.55 (0.100) (0.297) 30 1 NO PCB TRACKS IN THESE AREAS 5.00 (0.197) 15.5 (0.610) 3.30 (0.130) 7.40 (0.291) REF 26.5 (1.043) 30.0 (1.181) 2.540.05 (0.1000.002) 3 1.90 (0.075) TYP 2 2.50 (0.098) LOCKED COVER UNLOCKED COVER 5.50 (0.217) 12.2 (0.480) 1.700.05 (0.0670.002) TYP 5.50 (0.217) 15.2 (0.598) 4 TO 180 ANGLE FOR CARD INSERTION 0.27 (0.011) MATING POSITION 9.50 (0.374) 24 7.60 (0.299) 1.50 (0.059) SIM HEIGHT 6 5 1 27.4 (1.079) 24.4 (0.961) 1.400.05 (0.0550.002) TYP 5.080.05 (0.2000.002) 0.40 (0.016) REF MAXIMUM COPLANARITY 0.10 (0.004) BETWEEN CONTACT PADS 7 17.2 (0.677) REF 9162 Slide-In Low Profile SIM Connector GENERAL DESCRIPTION * * * * Six position Slide-In SIM Low Profile - 0.70mm to SIM base Side bracket to add solder security SIM guidance using the side walls KEY FEATURES AND BENEFITS * * * * * SMT Slide-In SIM Molded in high temperature LCP 0.38m Gold on contact surface and gold flash on contact tails 1.60mm connector height Tape & Reel packaging HOW TO ORDER 00 9162 006 40 1 Prefix Series Number of Contacts SIM Type 40 = SMT, Slide-in SIM 070 Contact Plating 0.38m Gold on Contact Surface and Gold Flash on Solder Tails. Underplated 1.27m Nickel. SIM Height Height of SIM Card: 0.70 (0.028) Suggested PCB Layout 15.65 (0.616) 12.05 (0.474) 3.00 (0.118) 5.98 (0.235) 2.54 (0.100) 7.78 (0.306) 2.54 (0.100) 16.7 (0.657) 5.08 (0.200) REF 2.10 (0.083) TYP 1.80 (0.071) 7.90 (0.311) 16.45 5.08 (0.648) (0.200) 16.7 (0.657) 5.08 (0.200) 2.54 (0.100) TYP 1.20 (0.047) TYP 0.85 (0.033) 1.80 (0.071) TYP 1.50 (0.059) TYP 1.60 (0.063) 15.2 (0.598) 0.08 (0.003) 0.70 (0.028) MATED CARD 25 9162 SIM/microSD Micro Combination Connector GENERAL DESCRIPTION * Six position slide-in SIM connector & Push-Push microSD connector * Allows two cards to be inserted into the same connector * Card detect switch on the microSD KEY FEATURES AND BENEFITS * * * * * * Space saving connector combination Integrates 2 connectors into 1 Contact Plating: Gold Insulator molded from LCP UL94 V-O Low profile 1.50mm to SIM 2.70mm connector height HOW TO ORDER 00 9162 006 50 1 Prefix Series Number of Contacts SIM Type 50 = SMT with SIM and microSD Slots at 90 0.60 (0.024) MAX 1.00 (0.039) Contact Plating Gold Plating over Nickel 1.75 (0.069) TYP 0.85 (0.033) 150 SIM Height Height of SIM Card: 1.50 (0.059) 0.78 (0.031) 5 PITCHES @ 1.27 = 6.35 (0.050 = 0.250) 4.47 (0.176) SLOT FOR SIM CARD 1.70 7.70 (0.067) 0.40 (0.303) (0.016) REF TYP 17.3 (0.681) SLOT FOR microSD Card 0.45 (0.018) 7 PITCHES @ 1.10 = 7.70 (0.043 = 0.303) SWITCH TERMINALS 2.70 +0.10 -0.05 (0.106 +0.004 -0.002 ) 6.35 (0.250) REF 16.53 (0.651) 26 3.13 (0.123) 0.60 (0.024) TYP 3.17 (0.125) microSD TERMINALS 17.15 (0.675) 1.18 (0.046) SIM TERMINALS 9162 SIM/microSD Micro Combination Connector Connector on PCB Recommended PCB Layout 15.8 (0.622) 1.95 (0.077) 1.10 (0.043) 2.90 (0.114) 0.50 (0.020) TYP 4.45 (0.175) 0.85 (0.033) 4.90 (0.193) 1.70 (0.067) 2 SWITCH PADS 0.60 x 0.85 (0.024 x 0.033) 17.15 (0.675) 1 2 3 8 microSD PADS 0.60 x 0.85 (0.024 x 0.033) Numbering 6 SIM PADS 0.90 x 1.09 (0.035 x 0.043) Numbering 1 5 2 6 3 17.9 7.70 (0.705) 1.10 (0.303) (0.043) TYP 4 5 6 7 8 13.48 (0.531) 7 2.45 (0.096) 2 LOCATING HOLES 1.27 (0.050) TYP 6.35 (0.250) 0.45 (0.018) TYP 8.30 (0.327) PCB SPACE USED BY CONNECTOR CARDS FULLY INSERTED 1.00 0.20 (0.039 0.008) 1.90 0.20 (0.075 0.008) 5.00 0.20 (0.197 0.008) microSD Card - LOCK microSD Card - UNLOCK 0.83 (0.033) 15.58 (0.613) microSD Card - PUSH NO CLEARANCE UNDER microSD Card 4.00 (0.157) 2.70 (0.106) CARDS EXTRACTED (Shown for reference only) 3 (0.726) 4.00 (0.157) 32.53 (1.281) 16.0 (0.630) 17.3 (0.681) 11.0 (0.433) 27.1 (1.067) REF 17.3 (0.681) S S 1 2 3 4 5 6 7 8 11.0 (0.433) 9.80 (0.386) 1 5 2 6 3 7 15.0 (0.591) 16.53 (0.651) 0.79 (0.031) 44.6 (1.756) 1.50 (0.059) MAXIMUM CLEARANCE UNDER SIM CARD 18.43 (0.726) 27.5 (1.083) CONTACT FUNCTIONS (ISO7816): 1. Supply Voltage Vcc 2. Reset 3. Clock 5. Ground 6. Program Voltage Vpp 7. I/O MICRO SD FUNCTIONS: S. Switch S. Switch 1. DAT 2 2. CD/DAT 3 3. CMD 4. Vdd 5. Clock 6. Vss 7. DAT 0 8. DAT 1 TOP OF CARD 0.75 (0.030) 15.0 (0.591) 16.53 (0.651) 27 9158 SOLO STACKER GENERAL DESCRIPTION The MOBO(R) series 9158 is a one-piece connector used to connect two PCBs within mobile phones, pagers, PDAs, security, handheld scanners, etc. in a cost-effective manner. A standard range is available with 16, 20, 24 and 28 contacts to suit stack heights of 1.90mm to 3.30mm. Other contact variants are also available up to 5.10mm, in custom housings. The SOLO STACKER can allow a spacing tolerance of up to 0.30mm and still provide reliable connections between the PCBs, even if they are not parallel. SOLO STACKER is designed for PCB surface mounting and is supplied in tape and reel packaging. Gold plated pads on the mating PCB or suitable flex circuits provide connection between the boards. Whatever your requirements this SOLO STACKER can also be customized to suit your applications. APPLICATIONS KEY FEATURES AND BENEFITS Suitable applications include: * Mobile Phones * PDA * Medical * PMR * Industrial * Security * Handheld Scanner Single piece Connector - no mating half connector required to connect two boards together which means: * Reduced assembly time. * Only one part to purchase and stock. * Due to the unique contact design, the mating device does not have to be parallel. * Extremely robust when subjected to shock and vibration. * Cost effective. * Helps reduce tolerance accumulation within system. DRAWINGS AND DIMENSIONS "B" FOR VERSION STACK HEIGHT 020 & 025 CONTACT PITCH 1.0 (0.039) 7.00 (0.276) 0.95 (0.037) REF AVAILABLE VACUUM PLACEMENT AREA WEEK/YEAR CODE "A" 2.70 (0.106) 3.30 (0.130) 0.40 (0.016) 0/+0.20 (0/+0.008) 4.00 (0.157) O 1.15 (0.045) TYP 2.70 (0.106) MAX 1.05 (0.041) 6.00 (0.236) ALL TAILS WITHIN 0.15 (0.006) MAX COPLANARITY TOLERANCE 1.80 (0.071) FOR VERSION STACK HEIGHT 030 7.00 (0.276) 4.80 (0.189) 3.70 - 4.00 (0.146 - 0.157) 4.00 (0.157) 6.00 (0.236) 28 0.04 (0.002) 4.20 (0.165) 1.90 (0.075) 2.70 (0.106) Number of Positions 16 20 24 28 Part Number 00-9158-016-XXX-XXX 00-9158-020-XXX-XXX 00-9158-024-XXX-XXX 00-9158-028-XXX-XXX A = Number of contact pitches at 1mm B = Connector Length A 7 9 11 13 B 9.00 11.00 13.00 15.00 9158 SOLO STACKER SMT PCB Footprint Mating PCB Postions CONTACT PITCH 1.0 (0.039) 5.40 (0.213) 5mm (0.197) 4mm (0.157) 3mm (0.118) 2mm (0.079) SMT PCB Mating Height 2mm 3mm 4mm 5mm PAD 0.60 x 1.00 (0.024 x 0.039) TIN PLATED Standard Positions 16 20 24 28 X X X X X X X X 4 Special Positions* 18 30 32 40 X X X X X Other sizes available on request. *Please consult with factory for availability. Mating PCB Footprint for version stack height 020 & 030 Mating PCB Footprint for version stack height 025 CONTACT PITCH 1.0 (0.039) CONTACT PITCH 1.0 (0.039) "A" "B" "B" 6.60 (0.260) O 1.40* (0.055) O 1.40 (0.055) 6.00 (0.236) KEEP THESE AREAS FREE FROM SOLDER RESIST KEEP THESE AREAS FREE FROM SOLDER RESIST PAD 0.70 x 1.70 (0.028 x 0.067) GOLD PLATED * Used for Boss versions only. PAD 0.70 x 1.70 (0.028 x 0.067) GOLD PLATED B 16 20 24 28 Dim 6.00 (0.236) 8.00 (0.315) 10.00 (0.394) 12.00 (0.472) HOW TO ORDER 00 9158 XXX XXX 06 X Prefix 00 = Standard Series No of Ways 16 = 016 20 = 020 24 = 024 28 = 028 Stack Height 020 = 1.9mm to 2.1mm 025 = 2.1mm to 2.7mm 030 = 2.8mm to 3.3mm Plating Variation 06 = Selective Gold 0.25m Gold Plated Contact Nose, Pure Tin Tail PCB Location Bosses 1 = With PCB Location Bosses 2 = Without PCB Location Bosses 29 9188 Staggered SOLO Stacker GENERAL DESCRIPTION The SOLO series 9188 is a one-piece connector used to connect two PCBs in a cost effective manner. A standard range is available with 4, 6, 8 staggered contacts to suit stack heights of 1.1mm to 2.1mm (see table below). SOLO Stacker is designed for PCB surface mounting and is supplied in tape and reel packaging. Gold plated pads on the mating PCB or suitable flex circuits provide connection between the two boards. APPLICATIONS KEY FEATURES AND BENEFITS Suitable applications include: * Handheld Devices: - Phones - Scanners - Radios - Medical Diagnostic - Security Devices Single piece connector - no mating half required to connect two boards together which means: * Reduced assembly time * Only one part to purchase and stock * Due to the unique contact design, the mating device does not have to be parallel * Helps reduce tolerance accumulation within system HOW TO ORDER 00 9188 004 012 062 Prefix Series No. of Ways Stack Height Plating Variation 06 = Selective Gold 0.25m Gold Plated Contact Nose, Pure Tin Tail No Bosses Code No. of Ways 004 4 006 6 008 8 30 Code 012 020 Height 1.1mm to 1.3mm 1.9mm to 2.1mm No. of Ways 4 only 6 & 8 only 9188 Staggered SOLO Stacker 4 Way Staggered Stacker 5.20 (0.205) MATING CONDITION O 1.48 (0.058) AVAILABLE VACUUM PLACEMENT AREA NOMINAL WORKING HEIGHT 2.06 (0.081) REF 2.50 (0.098) 1.20 (0.047) 1.00 (0.039) TYP 2.00 (0.079) SECTION ON X - X CONTACT NOSE HEIGHT 0.485 (0.019) TYP 1.60 (0.063) REF 0.00/0.20 (0.000/0.008) 2.50 (0.098) 0.40 (0.016) TYP ALL TAILS WITHIN 0.10 (0.004) MAXIMUM COPLANARITY TOLERANCE SMT PCB FOOTPRINT 3.00 (0.118) MATING PCB FOOTPRINT 4.00 (0.157) PAD 0.60 x 1.00 (0.024 x 0.039) PURE TIN PLATED (4 POSITIONS) 1.90/2.20 (0.075/0.087) 1.00 (0.039) 1.00 (0.039) TYP PAD 0.90 x 1.70 (0.035 x 0.067) GOLD PLATED (4 POSITIONS) 4.00 (0.157) 1.00 (0.039) TYP 2.00 4.10 (0.161) (0.079) 1.90 (0.075) 2.00 (0.079) KEEP THIS AREA FREE FROM SOLDER RESIST 2.00 (0.079) 5.30 (0.209) 31 9188 Staggered SOLO Stacker 6 Way Staggered Stacker 7.20 (0.283) O 1.48 (0.058) AVAILABLE VACUUM PLACEMENT AREA MATING CONDITION NOMINAL WORKING HEIGHT 2.04 (0.080) REF 2.80 (0.110) 2.00 (0.079) 1.00 (0.039) TYP 2.00 (0.079) SECTION ON X - X CONTACT NOSE HEIGHT 0.485 (0.019) TYP 0.40 (0.016) TYP 0.00/0.20 (0.000/0.008) 1.64 (0.065) REF 2.50 (0.098) ALL TAILS WITHIN 0.10 (0.004) MAXIMUM COPLANARITY TOLERANCE 2.47/2.75 (0.097/0.108) SMT PCB FOOTPRINT PAD 0.60 x 1.00 (0.024 x 0.039) PURE TIN PLATED (6 POSITIONS) 4.00 (0.157) 3.00 (0.118) MATING PCB FOOTPRINT 1.00 (0.039) TYP PAD 0.90 x 1.70 (0.035 x 0.067) GOLD PLATED (6 POSITIONS) 4.00 (0.157) 1.90 (0.075) 4.10 2.00 (0.161) (0.079) 3 PITCHES @ 2.00 = 6.00 (0.079 = 0.236) KEEP THIS AREA FREE FROM SOLDER RESIST 32 1.70 (0.067) 3 PITCHES @ 2.00 = 6.00 (0.079 = 0.236) 7.30 (0.287) 1.00 (0.039) TYP 9188 Staggered SOLO Stacker 8 Way Staggered Stacker 9.20 (0.362) O 1.48 (0.058) AVAILABLE VACUUM PLACEMENT AREA MATING CONDITION NOMINAL WORKING HEIGHT 2.04 (0.080) REF 2.80 0.110) 2.00 (0.079) 1.00 (0.039) TYP 2.00 (0.079) SECTION ON X - X 0.485 (0.019) TYP 0.00/0.20 (0.000/0.008) 1.64 (0.065) REF 0.40 (0.016) TYP ALL TAILS WITHIN 0.10 (0.004) MAXIMUM COPLANARITY TOLERANCE 2.50 (0.098) 2.45/2.75 (0.096/0.108) SMT PCB FOOTPRINT 1.00 (0.039) TYP 4.00 (0.157) 3.00 (0.118) 1.70 (0.067) MATING PCB FOOTPRINT 2.00 (0.079) TYP PAD 0.90 x 1.70 (0.035 x 0.067) GOLD PLATED (8 POSITIONS) 4.00 (0.157) 1.00 (0.039) TYP 2.00 (0.079) TYP 1.90 (0.075) PAD 0.60 x 1.00 (0.024 x 0.039) PURE TIN PLATED (8 POSITIONS) 4.10 2.00 (0.161) (0.079) 3 PITCHES @ 2.00 = 6.00 (0.079 = 0.236) KEEP THIS AREA FREE FROM SOLDER RESIST 3 PITCHES @ 2.00 = 6.00 (0.079 = 0.236) 9.30 (0.366) 33 9258 Ultra Low Profile Stacker GENERAL DESCRIPTION The SOLO series 9258 is a one-piece connector used to connect two PCBs in a cost effective manner. This connector is a 1.0mm pitch available in an 8 position with stack heights of 0.40mm and 0.80mm. It is available with or without location bosses. This connector is designed for PCB surface mounting and is supplied in tape and reel packaging. Gold plated pads on the mating PCB or suitable flex circuits provide connection between the boards. KEY FEATURES AND BENEFITS APPLICATIONS Single piece connector - no mating half connector required to connect two boards together which means: * Reduced assembly time * Only one part to purchase and stock * Due to the unique contact design, the mating device does not have to be parallel * Extremely robust when it comes to shock and vibration Suitable applications include: * Mobile phones * Handheld scanners * Portable medical devices * Display interface HOW TO ORDER 00 9258 008 XXX 06 X Prefix 00 = Standard Series No of Ways Stack Height 004 = 0.40mm 008 = 0.80mm Plating Variation 06 = Selective Gold 0.25m Gold Plated Contact Nose, Pure Tin Tail PCB Location Bosses 1 = With Mating PCB Location Bosses (top side) 2 = Without PCB Location Bosses 3 = With SMT PCB Location Bosses (bottom side) 4 = With SMT and Mating PCB Location Bosses (top and bottom sides) 34 9258 Ultra Low Profile Stacker 0.4mm Ultra Low Profile Stacker 0.8mm Ultra Low Profile Stacker 6.00 (0.236) 5.50 (0.217) 6.00 (0.236) 5.50 (0.217) 0.35 (0.014) 7 PITCHES @ 1.00 = 7.00 (0.039 = 0.276) 10.35 9.35 (0.407) (0.368) 0.65 (0.026) 0.35 (0.014) 10.35 9.35 (0.407) (0.368) 0.65 (0.026) O2.00 (0.079) R 0.50 (0.020) (4 POSITIONS) R 0.50 (0.020) (4 POSITIONS) 1.00 - 1.30 (0.039 - 0.051) 1.67 - 0.10 (0.066 - 0.004) 0.40 (0.016) O1.00 (0.039) ALL TAILS TO BE WITHIN 0.10 (0.004) MAXIMUM COPLANARITY TOLERANCE 1.50 (0.059) 1.40 - 1.70 (0.055 - 0.067) 0.40 (0.016) 1.00 (0.039) 1.85 - 0.10 (0.073 - 0.004) 1.90 (0.075) 0.80 1.00 (0.031) O1.00 (0.039) (0.039) PROPOSED SMT PCB LAYOUT ALL PADS PURE TIN PLATE O1.20 (0.047) 9.35 (0.386) 7 PITCHES @ 1.00 = 7.00 (0.039 = 0.276) 1.68 (0.066) 0.10 (0.004) CONNECTOR OUTLINE 5.70 (0.224) 0.80 (0.031) WITHOUT PCB LOCATION BOSSES 0.70 (0.028) PROPOSED MATING PCB LAYOUT ALL PADS GOLD PLATE 1.68 (0.066) WITH MATING PCB LOCATION BOSSES (TOP SIDE) WITH SMT PCB LOCATION BOSSES (BOTTOM SIDE) 7 PITCHES @ 1.00 = 7.00 (0.039 = 0.276) CONNECTOR OUTLINE 2.75 (0.108) WITH PCB AND SMT LOCATION BOSSES O1.20 (0.047) 0.70 (0.028) 9.35 (0.368) 35 9157 I/O Connector GENERAL DESCRIPTION The 9157 series was specifically designed for portable equipment. AVX now offers this two-part system as a standard product. The fixed SMT socket is designed to be housed within the confined dimensional constraints of the portable device. The plug/cover connector has sprung contacts and is designed for termination to accessory equipment. The connector is designed to house fifteen signal contacts on a 1mm pitch rated at 1.5A. There is the option to include a switching RF coax. A cradle SMT plug connector for docking applications is also available as standard and has the option of including a SMT RF coax. Whatever your requirements, the 9157 series can also be customized to suit your application. APPLICATIONS KEY FEATURES AND BENEFITS Suitable applications include: * Mobile Phones * PDA * Medical * Docking/Charging for any portable device * Patented 20 angled face on the socket gives self-cleaning face when mated with plug. * Metal Latching area integral to socket which saves PCB real estate. * Integral to socket is a mechanical 50 switching coax for SMT termination. * Single sprung plug contact design gives ten thousand mating cycles and cleaning/wiping action. * Customer has option to terminate own RF coax using AVX custom tooling: 06-9157-7116-01-000. * SMT plug has unique location pyramids that give positive alignment to portable device, and assist blind mating. * RoHS Compliant. 36 9157 I/O Connector Plug Wire with Coax Plug Wire without Coax 3.72 (0.146) 28.80 (1.134) 28.80 (1.134) 1.50 (0.059) 3.72 (0.146) 5.50 (0.217) MAX 25.80 (1.016) 25.80 (1.016) 8.30 (0.327) 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 1.00 (0.039) B B 4.20 (0.165) B SMT Plug with Coax 1.00 (0.039) 4.20 (0.165) SMT Plug without Coax 28.80 (1.134) 28.80 (1.134) 25.80 (1.016) 1.50 (0.059) B 25.80 (1.016) 1.50 (0.059) 4.25 (0.167) 4.25 (0.167) SMT CAP SHOWN ON 2 VIEWS ONLY SMT CAP SHOWN ON 2 VIEWS ONLY B B 3.00 (0.118) B B 22.80 (0.898) 22.80 (0.898) 15 PADS @ 0.60 x 1.50 15 PADS @ (0.024 x 0.094) 15 PADS @ 0.60 x 1.50 15 PADS @ (0.024 x 0.094) 1.97 (0.059) 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) SUGGESTED PCB LAYOUT 0.9 x 2.50 PAD 2 POSNS 3.32 (0.131) 2.65 (0.104) 2.40 (0.094) 2.40 (0.094) O 1.20 (0.047) PAD 1.97 (0.059) 2 THRU HOLES O 2.00 (0.079) 2 THRU HOLES O 2.00 (0.079) 4.15 (0.163) 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) SUGGESTED PCB LAYOUT 37 9157 I/O Connector SMT Socket with Coax 5.75 (0.226) SMT Socket without Coax 31.50 (1.240) 31.50 (1.240) 28.50 (1.122) 26.60 (1.047) 13.00 (0.512) 28.50 (1.122) 26.60 (1.047) 8.00 (0.315) 1.50 (0.059) 5.50 (0.217) 1.50 (0.059) 8.00 (0.315) 1.50 (0.059) 5.50 (0.217) 1.50 (0.059) CLEARANCE HOLE O 1.20 (0.047) TAPERED TO O 1.00 X 2.00 DEEP (0.039) X (0.079) R0.50 4 POSITIONS 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 5.00 (0.197) 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 5.00 (0.197) SMT PAD LAYOUT 31.50 (1.240) REF 4.10 (0.161) REF 5.60 (0.220) REF 31.50 (1.240) REF 28.50 (1.122) REF 4.10 (0.161) REF 0.10 (0.004) CLEARANCE 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 1.0 (0.039) PLATED THRU HOLE (2 POSITIONS) 4.30 (0.169) 0.31 (0.012) 1.80 0.71 (0.071) (0.028) 3.50 (0.138) 1.05 (0.041) 2.45 (0.096) 38 28.50 (1.122) REF 0.8 (0.031) SQUARE PAD (2 POSITIONS) 12.80 (0.504) 4.20 (0.165) MAX PAD 0.50 X 1.35 (0.020 X 0.053) (19 POSITIONS) 5.60 (0.220) REF 0.10 (0.004) CLEARANCE 14 PITCHES @ 1.00 = 14.00 (0.039 = 0.551) 26.60 (1.047) 1.0 (0.039) PLATED THRU HOLE (2 POSITIONS) 4.30 (0.169) 0.31 (0.012) 1.80 0.71 (0.071) (0.028) 3.50 (0.138) PAD 0.50 x 1.35 (0.020 X 0.053) (15 POSITIONS) 12.80 (0.504) MAX 0.8 (0.031) SQUARE PAD (2 POSITIONS) 4.90 (0.193) 9157 I/O Connector Cover Kit 32.20 (1.268) REF 35.05 (1.380) REF 7.30 (0.287) REF 28.58 (1.125) REF PLUG 10-9157-019-XXX-006 HOW TO ORDER Plug Options - Example 10 9157 015 000 006 Prefix 10 = Plug 58 = Special Series No of Ways 15 = 015 RF Coax Option 000 = No RF Coax 001 = With RF Coax Contact Type 006 = Solder Wire 007 = SMT Socket Options - Example 20 9157 015 000 006 Prefix 20 = Socket 58 = Special Series No of Ways 15 = 015 RF Coax Option 000 = No RF Coax 001 = With RF Coax Contact Type 006 = SMT Cover Options - Example * Parts supplied in kit form 30 9157 9700 00 000 Prefix 30 = Sub Assembly 58 = Special Series Cover Version 9700 = Screw/Press-fit Version Standard Grommet Variation 000 = No Grommet 035 = to suit 3.50 cable 050 = to suit 5.00 cable Patent: 2276285 5540599 Note: Application tooling to terminate coax cable 06-9157-7116-01-000. 39 9157 MOBO(R) 19 Way I/O Connector GENERAL DESCRIPTION Based on our standard 15 way 9157 I/O family, AVX has now released a family 19 way devices. This range includes a SMT 90 degree plug, a wire socket version that is used with the standard 9157 cover and a SMT socket for charging applications. Options with the 90 degree SMT socket include the sealing of the connector contacts and the connector to the housing up to IP67. There is also an option to have an EMLB (early mate, late break) on pins 1 and 19. To achieve the seal to the device housing, it may be necessary to customize the device housing design. On the SMT 90 degree version, we also have the capability of an integrated DC jack, enabling both the DC jack and the 19 way cover to be plugged in at the same time. AVAILABLE DEVICES: 10 9157 019 000 006 10 9157 019 000 007 20 9157 019 000 006 30 9157 97 XX 00 000 Plug wire version SMT charging version 90 degree SMT socket Cover options see page 39 Cover Kit 32.20 (1.268) REF 35.05 (1.380) REF 28.58 (1.125) REF PLUG 10-9157-019-XXX-006 40 7.30 (0.287) REF 9157 MOBO(R) 19 Way I/O Connector Plug Wire SMT Plug 28.80 (1.134) 25.80 (1.016) 1.50 0.10 (0.059 0.004) 28.80 0.10 (1.134 0.004) 18.00 (0.709) 1.00 (0.039) X 3.00 (0.118) 8.16 0.10 (0.321 0.004) SMT CAP TO BE FITTED CENTRALLY ON CONNECTOR 4.20 0.10 (0.165 0.004) X SMT Socket SMT Plug (Suggested PCB Layout) 31.50 (1.240) 28.50 (1.122) 26.60 (1.047) 22.00 (0.866) 5.75 (0.226) 22.80 (0.898) 2.90 (0.114) 17.00 (0.669) 19 PADS @ 0.60 x 2.40 (19 PADS @ (0.024 x 0.094) A 1.50 (0.059) 2.40 (0.094) 8.00 5.50 (0.315) (0.217) 1.50 (0.059) R1.20 TYP (R0.047 TYP) A 2 THRU HOLES O 1.60 (0.063) Pin 1 and Pin 19 are early mate late break contacts. 2.40 (0.094) 5.00 (0.197) 18 PITCHES @ 1.00 = 18.00 (0.039 = 0.709) 2 SMT PADS O 5.40 (0.213) O/D SUGGESTED PCB LAYOUT 18 PITCHES @ 1.00 = 18.00 18 PITCHES @ (0.039 = 0.709) SMT Socket (Suggested PCB Layout) 26.60 (1.047) 18 PITCHES @ 1.00 = 18.00 18 PITCHES @ (0.039 = 0.709) 2 PADS 0.80 x 0.80 (0.031 x 0.031) 3.50 (0.138) 4.30 (0.169) 2 HOLES O 1.00 (0.039) 19 PADS 0.50 x 1.35 (0.020 x 0.053) R1.20 (R0.047) SUGGESTED PCB LAYOUT 16.80 MAX (0.661 MAX) 4.90 (0.193) 1.80 (0.071) 0.71 (0.028) 0.31 (0.012) 41 9257 Reduced Size I/O Connector GENERAL DESCRIPTION An I/O interconnect system designed for portable equipment. AVX offers this plug and socket reduced size system as a standard product. The fixed SMT socket is designed to be mounted on a PCB and housed within a portable device. The plug is designed for cable termination with options of single and double sided contacts and customizing the overmold cover or parts can be supplied as connector only for sub contract termination. The socket connector houses 16 contacts in two rows on 1.25mm pitch with a rating of 1 amp per contact. Both connectors are RoHS compliant. APPLICATIONS KEY FEATURES AND BENEFITS Suitable applications include: * Cellular Phones * Handheld Devices * Industrial Modules * Medical Electronics * * * * * * * 42 No latching is required due to the click design of the contacts. Optional customization of the overmold cover. Options of single row (8 way) or dual row (16 way) plug connector. Compact size to optimize PCB real estate. Metal outer cover provides integrated PCB location and solder tab. Positive alignment and orientation of the plug and socket. 5K mating cycles and 1 amp rated. 9257 Reduced Size I/O Connector Single Sided 8 Way I/O Plug Connector Dual Sided 16 Way I/O Plug Connector 8.40 (0.331) 8.40 (0.331) 10.0 (0.394) 10.0 (0.394) 11.1 (0.437) 11.1 (0.437) 3.20 (0.126) 3.20 (0.126) 1.20 (0.047) 1.20 (0.047) SECTION A-A SECTION Z-Z Suggested Overmolding for Plug Connector 5.00 (0.197) MIN OVERMOLDING MUST BE CLEAR OF 5.00 (0.197) MIN. TO ENSURE FULL MATING WITH SOCKET CONNECTOR 25.08* (0.987) * Variable dimension to suit customer design and application. HOW TO ORDER 10 9257 016 001 Prefix 10 = Plug Connector Series No of Ways 016 = 16 way dual sided 008 = 8 way single sided Contact 001 = Solder Bucket 003 Plating Option 003 = 0.8m Selective Gold, Tin Tail Notes: 1. All dimensions are for reference only unless toleranced. 2. For full product specification refer to AVX spec 201-01-089. 3. Parts packed in tube with 50 parts per tube. 43 9257 Reduced Size I/O Connector 16 Position I/O Socket POLARIZATION CHAMFER SOLDER BRACKET/SHIELD 12.50 (0.492) 6.75 (0.266) 0.51 (0.020) TYP 3.00 (0.118) SECTION Z - Z 0.80 (0.031) TYP 0.25 (0.010) TYP REAR VIEW FRONT VIEW END VIEW 3.90 (0.154) LOCATION PEGS PCB Layout 12.50 (0.492) 1.10 (0.043) 0.15 (0.006) O 1.00 (0.039) LOCATION HOLES (2 POSITIONS) 1.20 (0.047) SMT PADS 2.70 (0.106) 1.80 1.15 (0.071) (0.045) TYP TYP 1.56 (0.061) 2.90 (0.114) 0.40 (0.016) TYP CONNECTOR OUTLINE 15 PITCHES @ 0.625 = 9.38 (0.025 = 0.369) HOW TO ORDER 20 9257 016 001 01 3 Prefix 20 = Socket Connector Series No of Ways 16 = 016 Contacts 001 = SMT Termination Solder Bracket 01 = Solder Bracket with location pegs Plating Option 3 = 0.8m Selective Gold, Tin Tail Packing Details Reel Qty. 1100 Pack Qty. 5500 Notes: 1. 16 Way I/O Socket. 2. For full product specification refer to AVX spec 201-01-089. 3. General tolerance 0.20 (0.008) unless otherwise stated. 4. SMT feet within 0.13 (0.005) coplanarity. 44 9257 Mini I/O Connector GENERAL DESCRIPTION AVX offers the 12 way mini I/O connector as a standard product. The fixed SMT socket is designed to be mounted on a PCB and housed within a portable device. The plug is designed for cable termination with options of single and double sided contacts. Parts can be supplied as connectors only for sub contract termination, or with a custom overmold cover. The socket connector houses 12 contacts in a single row on 0.50mm pitch. APPLICATIONS KEY FEATURES AND BENEFITS * * * * * No latching required due to the click design of the contacts. * Optional customization of the overmold cover. * Compact size to optimize PCB real estate. * Metal outer cover provides integrated PCB location and solder tab. * Positive alignment and orientation of the plug and socket. Medical Electronics Cellular Phones Industrial Modules Hand Held Devices 45 9257 Mini I/O Connector 9257 STANDARD 12 WAY MINI I/O PLUG POSITION 1 POSITION 12 7.55 (0.297) 11 EQUAL SPACES @0.50 (0.020) = 5.50 (0.217) 0.15 (0.006) TYP 0.20 (0.008) TYP 0.40 (0.016) 1.20 (0.047) 1.30 (0.051) 1.00 (0.039) 0.80 (0.031) 1.20 (0.047) 0.50 (0.020) 0.50 (0.020) 10.30 (0.406) 1.25 (0.049) REF 7.70 (0.303) 6.00 (0.236) 4.00 (0.157) 0.20 (0.008) 1.85 (0.073) 1.55 (0.061) 5.40 (0.213) POSITION 1 POSITION 12 4.00 (0.157) 8.60 (0.339) HOW TO ORDER 10 Prefix 10 = Plug Connector 46 9257 012 Series No of Ways 12 = 012 101 Contacts 101 = Solder Tail 006 Plating Option 006 = 0.25m Gold over Nickel 9257 Mini I/O Connector SUGGESTED OVERMOLDING FOR PLUG CONNECTOR 28.60* (1.126) MARKER POSITION 1 5.00 (0.197) POSITION 12 POSITION 1 DIMENSION MARKED WITH A * ARE VARIABLE DIMENSION TO SUIT CUSTOMER DESIGN AND APPLICATION 47 9257 Mini I/O Connector 9257 STANDARD 12 WAY MINI I/O SOCKET 10.84 (0.427) 8.20 (0.323) 0.18 (0.007) TYP 0.80 (0.031) 6.05 (0.238) 7.15 (0.281) 11 EQUAL SPACES @0.50 (0.020) = 5.50 (0.217) 9.60 (0.378) 7.80 (0.307) 11 EQUAL SPACES @0.50 (0.020) = 5.50 (0.217) 1.20 (0.047) 0.32 (0.013) TYP 1.70 (0.067) TYP POSITION 1 0.20 (0.008) TYP POSITION 12 2.00 1.30 (0.079) (0.051) 1.00 (0.039) 5.18 (0.204) 5.28 (0.208) 8.40 (0.331) 2.00 (0.079) 0.50 (0.020) TYP 1.00 (0.039) TYP 2.95 (0.116) 8.40 (0.331) 1.00 (0.039) 1.57 (0.062) (0.004) 0.05 (0.002) +0.10 -0.05 (0.002) 5.18 (0.204) HOW TO ORDER 20 9257 012 101 01 6 Prefix 20 = Socket Connector Series No of Ways 12 = 012 Contacts 101 = SMT Termination Solder Bracket 01 = Solder Bracket with location pegs Plating Option 6 = 0.25m Gold over Nickel 48 AMERICAS EUROPE ASIA-PACIFIC ASIA-KED (KYOCERA Electronic Devices) AVX Greenville, SC AVX Limited, England Tel: 864-967-2150 Tel: +44-1276-697000 AVX Northwest, WA AVX S.A.S., France Tel: 360-699-8746 Tel: +33-1-69-18-46-00 AVX/Kyocera, Asia, Ltd., Hong Kong AVX Midwest, IN AVX GmbH, Germany Tel: +852-2363-3303 Tel: 317-861-9184 Tel: +49-0811-95949-0 AVX/Kyocera (S) Pte Ltd., Singapore KED Hong Kong Ltd. Tel: +852-2305-1080/1223 Tel: +65-6286-7555 AVX Mid/Pacific, CA AVX SRL, Italy AVX/Kyocera Yuhan Hoesa, South Korea Tel: 408-988-4900 Tel: +39-02-614-571 Tel: +82-2785-6504 AVX Northeast, MA AVX Czech Republic Tel: 617-479-0345 Tel: +420-57-57-57-521 AVX/Kyocera HK Ltd., Taiwan KED Hong Kong Ltd. Shenzen Tel: +86-755-3398-9600 KED Company Ltd. Shanghai Tel: +86-21-3255-1833 KED Hong Kong Ltd. Beijing Tel: +86-10-5869-4655 Tel: +886-2-2656-0258 AVX Southwest, CA AVX/ELCO UK Tel: 949-859-9509 Tel: +44-1638-675000 AVX/Kyocera (M) Sdn Bhd, Malaysia AVX Canada ELCO Europe GmbH Tel: +60-4228-1190 Tel: 905-238-3151 Tel: +49-2741-299-0 AVX South America AVX S.A., Spain AVX/Kyocera International Trading Co. Ltd., Shanghai Tel: +55-11-4688-1960 Tel: +34-91-63-97-197 Tel: +86-21-3255 1933 AVX Benelux AVX/Kyocera Asia Ltd., Shenzen Tel: +65-6509-0328 Tel: +86-755-3336-0615 Kyocera Corporation Japan AVX/Kyocera International Trading Co. Ltd., Beijing Tel: +81-75-604-3449 Tel: +31-187-489-337 KED Taiwan Ltd. Tel: +886-2-2950-0268 KED Korea Yuhan Hoesa, South Korea Tel: +82-2-783-3604/6126 KED (S) Pte Ltd. Singapore Tel: +86-10-6588-3528 AVX/Kyocera India Liaison Office Tel: +91-80-6450-0715 Contact: A KYOCERA GROUP COMPANY http://www.avx.com S-MOBO0M813-C Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: 009155002301006 589155004000074