009155002301006 - AVX - Datasheet.Directory

CONNECT

INTER

AVX MOBO®Spring Contact

Interconnect Solutions

Version 13.8

MOBO®Connectors

www.avx.com

Table of Contents

NOTICE: Specifications are subject to change without notice. Contact your nearest AVX Sales Office for the latest specifications. All statements,

information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any

kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that

any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety mea-

sures are indicated or that other measures may not be required. Specifications are typical and may not apply to all applications.

BATTERY CONNECTORS SERIES 9155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Battery; Standard Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Battery; Reduced Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Battery; Ultra Low Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Battery; Solderless . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Battery; 3.0mm Right Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Battery; 2.5mm Right Angle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

SINGLE COMPRESSION CONTACT BOARD TO BOARD (BTB) SERIES 70-9155

. . . 17-19

Nominal Working Height 1.00mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Nominal Working Height 1.50mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

SIM CARD CONNECTORS SERIES 9162 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-27

Slide-In SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

SIM Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

SIM Connector with Locking Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

SIM/microSD Micro Combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

BOARD TO BOARD, SERIES 9158 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28-35

SOLO Stacker, 9158 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Staggered SOLO Stacker, 9188 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Ultra Low Profile Stacker, 9258 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

I/O CONNECTORS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36-48

Standard I/O, 15 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Standard I/O, 19 Position, 9157 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Reduced Size I/O, 9257 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Mini I/O, 9257 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

9155 Standard Battery

GENERAL DESCRIPTION

The standard battery connector is specifically designed for mobile equipment.

The connectors are available in 3, 4 and 5 contact positions all on a 2.50mm

pitch. The insulator height provides a 3mm spacing, with various contact

nose heights from 1.20mm to 2.60mm, to provide spacing options to the

end user.

All contacts are stamped and are rated to 3A, with Gold plating. Parts are

supplied in tape and reel for automatic pick and place. Optional retaining

brackets are available to provide greater strength when connected to the PCB.

Whatever your requirements, the 9155 series Battery Connector can also be

customized to suit your applications.

KEY FEATURES AND BENEFITS

• Suitable for 5000 mechanical cycles.

• Variety of contact heights offered to suit different mechanical designs.

• Connectors can be end to end stackable.

• RoHS Compliant available.

APPLICATIONS

• Mobile Phones

• PDA

• Medical

• PMR

• Industrial

3 Way

Battery Connector

4 Way

Battery Connector

5 Way

Battery Connector

7.50 (0.295)

1.40 (0.055) REF

0.00 +0.10 -0

(0.00 +0.004 -0)

3.05

(0.120)

TYP

3.00 ± 0.08

(0.118 ± 0.003)

8.00

(0.315)

1.25

(0.049)

1.25 (0.049)

2 PITCHES

@ 2.5 = 5.00

(0.098 = 0.197)

CONTACT TAILS TO BE

WITHIN A 0.1 (0.004)

COPLANARITY RANGE

WHEN INSULATOR IS

SITTING ON DATUM FACE.

10.00 (0.394) 3 PITCHES

@ 2.5 = 7.50

(0.098 = 0.295)

1.40 (0.055) REF

0.00 +0.10 -0

(0.00 +0.004 -0)

3.05

(0.120)

TYP

3.00 ± 0.08

(0.118 ± 0.003)

8.00

(0.315)

1.25

(0.049)

1.25 (0.049)

CONTACT TAILS TO BE

WITHIN A 0.1 (0.004)

COPLANARITY RANGE

WHEN INSULATOR IS

SITTING ON DATUM FACE.

12.50 (0.492) 4 PITCHES

@ 2.5 = 10.00

(0.098 = 0.394)

1.40 (0.055) REF

0.00 +0.10 -0

(0.00 +0.004 -0)

3.05

(0.120)

TYP

3.00 ± 0.08

(0.118 ± 0.003)

8.00

(0.315)

1.25

(0.049)

1.25 (0.049)

CONTACT TAILS TO BE

WITHIN A 0.1 (0.004)

COPLANARITY RANGE

WHEN INSULATOR IS

SITTING ON DATUM FACE.

9155 Standard Battery

3 Way PCB Board Layout 4 Way PCB Board Layout

5 Way PCB Board Layout

3.60 (0.142)

2 PITCHES

@ 2.5 = 5.00

(0.098 = 0.197)

PAD 1.50 X 1.50

(0.059 X 0.059)

(3 POSITIONS)

2.50 (0.098)

3.95

(0.156)

7.30

(0.287)

BRACKET PAD AREA

(ELECTRICALLY ISOLATED)

BRACKET PAD AREA

(ELECTRICALLY ISOLATED)

3.60 (0.142)

3 PITCHES

@ 2.50 = 7.50

(0.098 = 0.295)

PAD 1.50 X 1.50

(0.059 X 0.059)

(4 POSITIONS)

2.50 (0.098)

3.95

(0.156)

7.30

(0.287)

7.30

(0.287)

BRACKET PAD AREA

(ELECTRICALLY ISOLATED)

3.60

(0.142)

4 PITCHES

@ 2.5 = 10.00

(0.098 = 0.394)

PAD 1.50 X 1.50

(0.059 X 0.059)

(5 POSITIONS)

2.50 (0.098)

3.95

(0.156)

003

No of

Ways

3 = 003

4 = 004

5 = 005

Contact Height

1 = 1.20 (0.047) / 1.50 (0.059)

2 = 1.80 (0.071) / 2.10 (0.083)

3 = 2.30 (0.091) / 2.60 (0.102)

Bracket

01 = With Bracket

HOW TO ORDER

Prefix

00 = Standard

58 = Special

9155

Series

Standard Battery

Connector

00 = Standard Force

Plating Option

6 = 0.4μm Selective Gold,

Pure Tin Tail

8 = 0.8μm Selective Gold,

Pure Tin Tail

GENERAL DESCRIPTION

The newest product in AVX’s Interconnect family of

battery connectors saves 50% in volume over the initial

9155 series compression connectors as illustrated in

the photograph. These connectors are rated at a full 3

amps per contact on 2.5mm centers. Sizes range from

2 positions through 5 positions and are end to end

stackable.

APPLICATIONS

• Cellular Phones

• Handheld Devices

• Industrial Modules

• Medical Electronics

KEY FEATURES AND BENEFITS

• 2.4mm insulator height

• 3 amps/contact

• Large SMT mounting area for

positive mechanical attachment

• 5k mating cycles

• End-to-end stackable

HOW TO ORDER

Prefix

9155

Series

003

No. of Ways

201

Reduced Size Battery Connector

XXX

Plating Option

Code No. of Ways Reel Qty Packing Qty

002 2 2000 2000

003 3 2000 2000

004 4 2000 2000

005 5 2000 2000

Code Description

201 Reduced Size

Battery Connector

Code Description

006 0.4μm Selective Gold, Pure Tin Tail

008 0.8μm Selective Gold, Pure Tin Tail

9155 Size Reduced Battery Connector

5.00 (0.197)

2.50 (0.098)

0.90 (0.035)

CONTACT TAILS TO

BE WITHIN 0.13

COPLANARITY

RANGE

5.30 (0.209)

5.00 (0.197)

0.10

(0.004)

2.40 (0.094)

4.00 (0.157)

1.2 (0.047)/

1.5 (0.059)

SECTION X - X

4.92 (0.194) REF

SECTION X - X

SHOWING CONTACTS

DEFLECTED TO 2.5mm

7.50 (0.295)

0.90

(0.035)

2.50 (0.098)

CONTACT TAILS TO

BE WITHIN 0.13

COPLANARITY

RANGE

5.30 (0.209)

5.00 (0.197)

0.10

(0.004)

2.40 (0.094)

4.00 (0.157)

1.2 (0.047)/

1.5 (0.059)

SECTION X - X

4.92 (0.194) REF

SECTION X - X

SHOWING CONTACTS

DEFLECTED TO 2.5mm

10.00 (0.394)

2.50 (0.098)

0.90

(0.035)

CONTACT TAILS TO

BE WITHIN 0.13

COPLANARITY

RANGE

5.30 (0.209)

5.00 (0.197)

0.10

(0.004)

2.40 (0.094)

4.00 (0.157)

1.2 (0.047)/

1.5 (0.059)

SECTION X - X

4.92 (0.194) REF

SECTION X - X

SHOWING CONTACTS

DEFLECTED TO 2.5mm

12.50 (0.492)

CONTACT TAILS TO

BE WITHIN 0.13

COPLANARITY

RANGE

0.90

(0.035)

2.50 (0.098)

5.30 (0.209)

5.00 (0.197)

0.10

(0.004)

2.40 (0.094)

4.00 (0.157)

1.2 (0.047)/

1.5 (0.059)

SECTION X - X

4.92 (0.194) REF

SECTION X - X

SHOWING CONTACTS

DEFLECTED TO 2.5mm

2 Way Reduced Battery Connector 3 Way Reduced Battery Connector

4 Way Reduced Battery Connector 5 Way Reduced Battery Connector

2.20 (0.087)

2.50

(0.098)

PAD AREA MAY

BE REDUCED AT

CUSTOMER

DISCRETION

DOTTED LINE REPRESENTS

THE OUTSIDE DIMENSIONS

OF THE INSULATOR

0.35 (0.014)

5.30 (0.209)

5.00 (0.197)

1.50 (0.059)

TYP

2.20 (0.087)

PAD AREA MAY

BE REDUCED AT

CUSTOMER

DISCRETION

0.35 (0.014)

5.30 (0.209)

5.00 (0.197)

1.50 (0.059)

TYP

DOTTED LINE REPRESENTS

THE OUTSIDE DIMENSIONS

OF THE INSULATOR

2 Way Reduced Battery Connector

PCB Layout

3 Way Reduced Battery Connector

PCB Layout

2.20 (0.087)

7.50 (0.295)

PAD AREA MAY

BE REDUCED AT

CUSTOMER

DISCRETION

0.35 (0.014)

5.30 (0.209)

5.00 (0.197)

1.50 (0.059)

TYP

DOTTED LINE REPRESENTS

THE OUTSIDE DIMENSIONS

OF THE INSULATOR

2.20 (0.087)

10.00 (0.394)

PAD AREA MAY

BE REDUCED AT

CUSTOMER

DISCRETION

0.35 (0.014)

5.30 (0.209)

5.00 (0.197)

1.50 (0.059)

TYP

DOTTED LINE

REPRESENTS

THE OUTSIDE

DIMENSIONS OF

THE INSULATOR

4 Way Reduced Battery Connector

PCB Layout

5 Way Reduced Battery Connector

PCB Layout

9155 Size Reduced Battery Connector

GENERAL DESCRIPTION

The AVX Interconnect group has released a new ultra-low profile 3 amp

per contact connector for battery pack or slide-in module applications.

The compressed “Z” axis height of 1.3mm leads the industry from a pro-

file standpoint. The initial product is in a 2 & 3 position configuration with

other sizes expected to follow. The connector has an integral end block to

act as a mechanical stop.

APPLICATIONS

• Cellular Phones

• Handheld Devices

• Industrial Modules

• Medical Electronics

9155 Ultra-Low Profile Battery

KEY FEATURES

AND BENEFITS

• Ultra-Low Profile

• 3 amps/contact

• Integral End Stop

• 5k mating cycles

6.60 (0.260)

5.10 (0.201)

0.84

(0.033)

2.00

(0.079)

1.20

(0.047)

2.50 (0.098)

Ø 2.00 PICK AND

PLACE AREA

OR RECTANGLE

DOTTED LINE

IS CONTACT

CENTER LINE

7.57 (0.298)

2.75 (0.108)

0.70 (0.028)

BATTERY PACK

INSERTION DIRECTION

SECTION A-A

CONTACT UNDEFLECTED

2.60 (0.102)

CONTACT SHOWN WITH STOP

RESTING ON PCB

1.30 (0.051) MAX

5.00 (0.197)

Ø 2.00 PICK AND

PLACE AREA

OR RECTANGLE

9.10 (0.358)

7.60 (0.299)

2 EQUAL PITCHES

@ 2.50 (0.098) = 5.00 (0.197)

0.84

(0.033) 2.00

(0.079)

1.20

(0.047)

DOTTED LINE

IS CONTACT

CENTER LINE

7.57 (0.298)

2.75 (0.108)

0.70 (0.028)

BATTERY PACK

INSERTION DIRECTION

SECTION A-A

CONTACT UNDEFLECTED

2.60 (0.102)

CONTACT SHOWN WITH STOP

RESTING ON PCB

1.30 (0.051) MAX

2 Way Low Profile Battery Connector 3 Way Low Profile Battery Connector

HOW TO ORDER

Prefix

9155

Series

003

No. of Ways

101

Low Profile Battery Connector

Code No. of Ways Qty. Per Reel

002 2 1500

003 3 1200

Code Description Operating Height

101 Low Profile 1.30 (0.051)

Battery Connector

XXX

Plating Option

Code Description

006 0.4μm Selective Gold, Pure Tin Tail

008 0.8μm Selective Gold, Pure Tin Tail

3 Way Low Profile Battery Connector

PCB Layout

2 Way Low Profile Battery Connector

PCB Layout

9155 Ultra-Low Profile Battery

0.60 (0.024)

1.50 (0.059)

2.20 (0.087)

2.50 (0.089)

2.20 (0.087)

10.00 (0.394)

11.95 (0.470)

DOTTED LINE

IS CONTACT

CENTER LINE

2.20 (0.087)

10.00 (0.394)

11.95 (0.470)

2.50 (0.089) TYP

0.60 (0.024)

1.50 (0.059)

2.20 (0.087)

DOTTED LINE

IS CONTACT

CENTER LINE

GENERAL DESCRIPTION

As an addition to our range of Battery connectors we have added

a solderless termination option. This option has the termination

area gold plated and the contact form is compression to the PCB

and to the Battery which is used in the end equipment.

Rated at 3 Amps and 5,000 operations (the same as the SMT

version). These battery connectors compliment the existing

standard range of RoHS compliant components giving the

designer an added option of the solderless termination.

When these connectors are held in place by the casing of the end

equipment, the connection to the PCB is achieved by compress-

ing the connector contacts against the PCB and against the actual

battery. It is the housing which maintains the connection.

58 9155 004 000 020

1.20 (0.047)

1.60

(0.063)

1.60

(0.063)

6.00 (0.236)

4.25

(0.167)

2.75

(0.108) 3 X 3.0 PITCHES=9.0

(3 X 0.118 PITCHES=0.354)

2.00 (0.079)

EJECTOR FACE (SEE NOTE 8)

R1 MAX TYP

0.040)

2°

11.81

(0.465)

R1 M

R1 MAX TYP

1.00 (0.040)

14.50 -0.1

(0.571 -0.004)

5.70 (0.224)

2.77

(0.109)

3.55 (0.140)

5.05 ±0.15

(0.199 ±0.006)

2.95

(0.116)

4.54 (0.179)

0.5 (0.020)

R 0.70

(0.028)

SECTION AA

0.50 -0.1

+0.03

(0.020 -0.004)

+0.012

9.90 ±0.08

(0.039 ±0.003)

2.75 (0.108)

2.95 (0.116)

4.40

(0.173)

R1 TYP

1.00 -0.05

+0 (0.040 -0.002)

72°

CONNECTOR

OUTLINE

SUGGESTED PCB LAYOUT

4.4 (0.173)

3 X 3.0 PITCHES=9.0

(3 X 0.118 PITCHES=0.354)

2 TYP

(0.079 TYP)

58 9155 003 000 053

1.00 (0.039)

0.80

(0.031)

0.80

(0.031)

1.25

(0.049)

6.50 (0.256)

10.00 (0.394)

3.00

(0.118)

6.00

(0.236)

1.20 (0.047) A

3.50

(0.138)

0.69

(0.027)

1.02 (0.040)

2.40 (0.094)

0.85 (0.033)

7.20 (0.283)

0.3

(0.012) 0.86 (0.034)

X 3 POSNs

1.00 (0.039)

1.25 (0.049)

0.50 (0.020)

9.00 (0.354)

0.70

(0.028)

2.50

(0.098)

0.35 X 45°

(0.014 X 45°)

0.35 X 45°

(0.014 X 45°)

0.80 X 45°

(0.031 X 45°)

7.63 (0.300)

FULLY DEFLECTED CONTACT

TAIL PCB LAYOUT

CONNECTOR

OUTLINE

9.00 (0.354)

0.50

(0.098)

4.50

(0.177)

2.22

(0.087)

2 PITCHES @

3.00 = 6.00

(0.118 = 0.236) 1.80 X 2.80

(0.071 X 0.110)

GOLD PADS

9155 MOBO®

Solderless Battery Connectors

FEATURES AND BENEFITS

• Simple designed spring contact

• End to end stackable for larger pin counts

• Additional contact anchor brackets to added

stability on the PCB

• Robust to shock and vibration

• Selectively plated contact area

APPLICATIONS

• Mobile phones

• Digital music players

• Hand held terminals

• Data terminals or any other small portable device

GENERAL DESCRIPTION

A further addition to the battery connector range offered by

AVX is a 90 degree version. On a 3mm pitch, offered in 2 to

5 contact positions and rated as with all of the battery range

at 3 amps. The connector’s design is small and compact to

minimize its profile yet stable while having a contact point

4.61mm above the PCB.

The stability comes from the addition of extra SMT anchor

brackets that are in between the SMT contact pads and both

at the front of the connector and within the row of the con-

tact SMT pads.

As with the other 9155 series of battery connectors offered

by AVX the 90 degree version is rated at 3 amps and 5000

mating cycles, RoHS compliant and using high temperature

plastic enables the connectors to be processed at up to

260ºC.

HOW TO ORDER

Prefix

9155

Series

002

No. of Ways

301

Right Angle

Battery Connector

Code No. of Ways

002 2

003 3

004 4

005 5

Code Description

301

Right Angle 3.00mm

Battery Connector

XXX

Plating Option

Code Description

006 0.4μm Selective Gold, Pure Tin Tail

008 0.8μm Selective Gold, Pure Tin Tail

9155 MOBO®

3.0mm Pitch Right Angle

Battery Connectors

1.19 - 1.49

(0.047 - 0.059)

1.00

(0.039) 3.23

(0.127)

0 90 (0 035)

4.64

(0.183)

6.00

(0.236)

1.25 (0.049)

TAIL WIDTH

0.90 (0.035)

NOSE WIDTH

ANCHOR

BRACKET

5.90

(0.232)

3.00

(0.118)

0.05-0.23

(0.002-0.009)

CONTACT AND

BRACKET TAILS TO

BE WITHIN 0.10

COPLANARITY RANGE

2 Way Right Angle Battery Connector

1.19 - 1.49

(0.047 - 0.059)

1.00

(0.039) 3.23

(0.127)

4.64

(0.183)

6.00

(0.236)

1.25 (0.049)

TAIL WIDTH

0.90 (0.035)

NOSE WIDTH

ANCHOR

BRACKET

8.90

(0.350)

2 PITCHES @

3.00 (0.118) = 6.00 (0.236)

0.05-0.23

(0.002-0.009)

CONTACT AND

BRACKET TAILS TO

BE WITHIN 0.10

COPLANARITY RANGE

3 Way Right Angle Battery Connector

1.19 - 1.49

(0.047 - 0.059)

1.00

(0.039)

3.23

(0.127)

6.00

(0.236) 4.64

(0.183)

1.25 (0.049)

TAIL WIDTH

0.90 (0.035)

NOSE WIDTH

ANCHOR

BRACKET

11.90

(0.469)

3 PITCHES @

3.00 (0.118) = 9.00 (0.354)

0.05-0.23

(0.002-0.009)

CONTACT AND

BRACKET TAILS TO

BE WITHIN 0.10

COPLANARITY RANGE

4 Way Right Angle Battery Connector

1.19 - 1.49

(0.047 - 0.059)

1.00

(0.039)

3.23

(0.127)

6.00

(0.236) 4.64

(0.183)

1.25 (0.049)

TAIL WIDTH

0.90 (0.035)

NOSE WIDTH

ANCHOR

BRACKET

14.90 (0.587)

4 PITCHES @

3.00 (0.118) = 12.00 (0.472)

CONTACT AND

BRACKET TAILS TO

BE WITHIN 0.10

COPLANARITY RANGE

0.05-0.23

(0.002-0.009)

5 Way Right Angle Battery Connector

mm (inches)mm (inches)

9155 MOBO®

3.0mm Pitch Right Angle

Battery Connectors

9155 MOBO®

3.0mm Pitch Right Angle

Battery Connectors

3 Way Right Angle Battery Connector

PCB Layout

2 Way Right Angle Battery Connector

PCB Layout

PURE TIN PAD

1.25 x 1.35

(0.049 x 0.053)

1 POSITION

PURE TIN PAD

0.90 x 1.00

(0.035 x 0.039)

1 POSITION

PURE TIN PADS

1.50 x 1.00

(0.059 x 0.039)

2 POSITIONS

3.46

(0.136)

0.50 (0.020)

3.00 (0.118)

PURE TIN PAD

1.25 x 1.35

(0.049 x 0.053)

2 POSITIONS

PURE TIN PAD

0.90 x 1.00

(0.035 x 0.039)

2 POSITIONS

PURE TIN PADS

1.50 x 1.00

(0.059 x 0.039)

3 POSITIONS

3.46

(0.136)

1.50 (0.059)

2 PITCHES @

3.00 (0.118) = 6.00 (0.236)

5 Way Right Angle Battery Connector

PCB Layout

4 Way Right Angle Battery Connector

PCB Layout

4 PITCHES @

3.00 (0.118) = 9.00 (0.354)

PURE TIN PAD

1.25 x 1.35

(0.049 x 0.053)

3 POSITIONS

PURE TIN PAD

0.90 x 1.00

(0.035 x 0.039)

3 POSITIONS

PURE TIN PADS

1.50 x 1.00

(0.059 x 0.039)

4 POSITIONS

3.46

(0.136)

1.50 (0.059)

2 PITCHES @

3.00 (0.118) = 6.00 (0.236)

4 PITCHES @

3.00 (0.118) = 12.00 (0.472)

PURE TIN PAD

1.25 x 1.35

(0.049 x 0.053)

4 POSITIONS

PURE TIN PAD

0.90 x 1.00

(0.035 x 0.039)

4 POSITIONS

PURE TIN PADS

1.50 x 1.00

(0.059 x 0.039)

5 POSITIONS

3.46 (0.136)

1.50 (0.059)

3 PITCHES @

3.00 (0.118)

= 9.00 (0.354)

mm (inches)

GENERAL DESCRIPTION

AVX extends the battery connector range with the addition of

a low profile 2.5mm pitch right angle connector. This

connector is offered in 2 to 5 positions and is rated at 3 amps.

The connector’s design is small and compact to minimize

its profile yet functionally stable having a contact point at

2.20mm above the PCB.

The unique design of this stamped contact allows for a

maximum insulator height of 4.0mm which makes it size

compatible with more expensive pogo pin style battery

connectors.

The complete family of battery connectors from AVX offer all

of the same advantages; Beryllium Copper base material for

enhanced contact performance, a full 3 amp current rating,

selective gold plating for 5000 mating cycles and high

temperature plastic for RoHS soldering.

KEY FEATURES AND BENEFITS

• Reliable stamped contact with coined nose

• Full 1.5mm nose deflection for large operating range

• Two anchor tabs for mechanical stability

• 5000 cycle durability rating

• Minimized X, Y and Z package dimensions

APPLICATIONS

• Mobile Phones

• Digital Music Players

• Any Handheld Devices

HOW TO ORDER

Prefix

9155

Series

002

No. of Ways

541

Right Angle

Battery Connector

Code No. of Ways

002 2

003 3

004 4

005 5

Code Description

541

Right Angle 2.5mm

Battery Connector

XXX

Plating Option

Code Description

006 0.4μm Selective Gold, Pure Tin Tail

008 0.8μm Selective Gold, Pure Tin Tail

9155 MOBO®

2.5mm Pitch Right Angle

Battery Connector

9155 MOBO®

2.5mm Pitch Right Angle

Battery Connector

2 Way Right Angle Battery Connector

7.50 (0.295)

4.50

(0.177) 4.00

(0.157)

2.50

(0.098)

1.00 (0.039) TYP

1.40 (0.055) TYP

6.50 (0.256)

COPLANARITY

0.10 (0.004) Maximum

CONTACT NOSE RETAINED

ANTI-SNAG FEATURE

1.50 (0.059) NOSE TRAVEL

2.00

(0.079)

0.10 ± 0.10

(0.004 ± 0.004)

CONTACT TO BASE

OF INSULATOR

3.80

(0.150)

2.10

(0.083)

3 Way Right Angle Battery Connector

10.0 (0.394)

9.00 (0.354)

1.00 (0.039) TYP

1.40 (0.055) TYP

2 PITCHES

@ 2.50 = 5.00

(0.098 = 0.197)

4.50

(0.177) 4.00

(0.157)

COPLANARITY

0.10 (0.004) Maximum

CONTACT NOSE RETAINED

ANTI-SNAG FEATURE

1.50 (0.059) NOSE TRAVEL

2.00

(0.079)

0.10 ± 0.10

(0.004 ± 0.004)

CONTACT TO BASE

OF INSULATOR

3.80

(0.150)

2.10

(0.083)

DEFLECTED CONNECTOR

UNDEFLECTED CONTACT

DEFLECTED CONNECTOR

UNDEFLECTED CONTACT

4 Way Right Angle Battery Connector

4.50

(0.177) 4.00

(0.157)

1.00 (0.039) TYP

12.5 (0.492)

11.5 (0.453)

1.40 (0.055) TYP

3 PITCHES

@ 2.50 = 7.50

(0.098 = 0.295)

COPLANARITY

0.10 (0.004) Maximum

CONTACT NOSE RETAINED

ANTI-SNAG FEATURE

5 Way Right Angle Battery Connector

4.50

(0.177) 4.00

(0.157)

1.00 (0.039) TYP

15.0 (0.591)

14.0 (0.551)

1.40 (0.055) TYP

4 PITCHES

@ 2.50 = 10.0

(0.098 = 0.394)

COPLANARITY

0.10 (0.004) Maximum

CONTACT NOSE RETAINED

ANTI-SNAG FEATURE

1.50 (0.059) NOSE TRAVEL

2.00

(0.079)

0.10 ± 0.10

(0.004 ± 0.004)

CONTACT TO BASE

OF INSULATOR

3.80

(0.150)

2.10

(0.083)

DEFLECTED CONNECTOR

UNDEFLECTED CONTACT

1.50 (0.059) NOSE TRAVEL

2.00

(0.079)

0.10 ± 0.10

(0.004 ± 0.004)

CONTACT TO BASE

OF INSULATOR

3.80

(0.150)

2.10

(0.083)

DEFLECTED CONNECTOR

UNDEFLECTED CONTACT

9155 MOBO®

2.5mm Pitch Right Angle

Battery Connector

9155 MOBO®

2.5mm Pitch Right Angle

Battery Connector

2 Way Right Angle Battery Connector

PCB Layout

3 Way Right Angle Battery Connector

PCB Layout

4 Way Right Angle Battery Connector

PCB Layout

5 Way Right Angle Battery Connector

PCB Layout

4.00

(0.157) 3.45

(0.136)

0.50

(0.020)

2.50

(0.098)

0.15

(0.006)

2.15

(0.085)

6.30 (0.248)

4.50 (0.177)

6.50 (0.256)

2 PADS 1.30 x 1.00

(0.051 x 0.039)

2 PADS 1.50 x 2.15

(0.059 x 0.085)

AREA TO BE KEPT

CLEAR FROM

TRACKS/EXPOSED COPPER

CONNECTOR OUTLINE

2 PITCHES

@ 2.50 = 5.00

(0.098 = 0.197)

8.80 (0.346)

7.00 (0.276)

9.00 (0.354)

2 PADS 1.30 x 1.00

(0.051 x 0.039)

0.15

(0.006)

2.15

(0.085)

4.00

(0.157) 3.45

(0.136)

0.50

(0.020)

2 PADS 1.50 x 2.15

(0.059 x 0.085)

AREA TO BE KEPT

CLEAR FROM

TRACKS/EXPOSED COPPER

CONNECTOR OUTLINE

11.3 (0.445)

9.50 (0.374)

11.5 (0.453)

3 PITCHES

@ 2.50 = 7.50 (0.098 = 0.295)

4 PADS 1.30 x 1.00

(0.051 x 0.039)

0.15

(0.006)

2.15

(0.085)

4.00

(0.157) 3.45

(0.136)

0.50

(0.020)

2 PADS 1.50 x 2.15

(0.059 x 0.085)

AREA TO BE KEPT

CLEAR FROM

TRACKS/EXPOSED COPPER

CONNECTOR OUTLINE

13.8 (0.543)

12.0 (0.472)

14.0 (0.551)

4 PITCHES

@ 2.50 = 10.0 (0.098 = 0.394)

5 PADS 1.30 x 1.00

(0.051 x 0.039)

4.00

(0.157) 3.45

(0.136)

0.50

(0.020)

2.15

(0.085)

0.15

(0.006)

2 PADS 1.50 x 2.15

(0.059 x 0.085)

AREA TO BE KEPT

CLEAR FROM

TRACKS/EXPOSED COPPER

CONNECTOR OUTLINE

Single Compression Contact:

Board-to-Board (BTB)

Series 70-9155

Designers for ruggedized connectors to meet harsh environments continue to look

for new products which will reduce size and cost without jeopardizing performance.

The new Ultra-Low Profile (ULP) compression contact from AVX surface mounts to

a PCB and provides a reliable compression connection to the mating board, even

under extreme shock and vibration applications. With over 20 years of 1-Piece

compression contact experience, this innovative contact offers full connector

performance functionality at the individual contact level. Thus, allowing single

contacts to be placed in any location or position on a PCB.

The high force beryllium copper contact is gold plated to maximize reliability and

signal integrity. The current offering has two contacts with nominal heights of

1.0mm and 1.5mm. Add in the “Z” axis tolerance range and the compressed height

covers 0.75mm up to 1.75mm. The contacts are supplied in tape and reel for easy

SMT placement.

ELECTRICAL

• Current Rating: 3 Amps

• Voltage Rating: Based on place-

ment distance

9155

Series

Prefix

001

Number

of Ways

HOW TO ORDER

6XX

Contact Description

ENVIRONMENTAL

• Operating Temperature:

-40ºC to +125ºC

MECHANICAL

• Contact Material: Beryllium Copper

• Contact Plating: Gold over Nickel

• Durability: 50, 500 and 1000 cycles

FEATURES AND BENEFITS

• Reliable gold plated Beryllium Copper contacts for high cycle life

and signal integrity up to 1000 cycles

• Tape and reel packaged for automated SMT placement

• Sweeping beam design for pluggable/module applications

• Three gold plating options to match end product environmental or

expected life requirements

APPLICATIONS

• Industrial/Ruggedized handheld or portable

devices

• BTB connection for any traditional power or

signal application

• Ground connections between PCB’s or

housings

Code Nominal Contact Operating

Operating Height Height Range

610 1.00mm 0.75mm to 1.25mm

615 1.50mm 1.25mm to 1.75mm

00X

Contact Description

Code Gold Description Availability

Thickness

004 0.1µm Nickel under Plate, Gold on Nose Standard

Tin on Remainder

006 0.4µm Nickel under Plate, Gold on Nose Special

Tin on Remainder Order

008 0.8µm Nickel under Plate, Gold on Nose Special

Tin on Remainder Order

70-9155-001-610-006

NOMINAL WORKING HEIGHT 1.00MM

NOTES:

1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.

2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND

APPLICATIONS NOTES 201-01-154.

3. MATERIAL: COPPER ALLOY 0.2MM THICK.

4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE

REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.

5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.

6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN

APPLICATION NOTES.

7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.

8. SMT PADS PLATED TIN.

9. MATING PAD PLATED GOLD OVER NICKEL.

FULLY DEFLECTED

CONTACT

SUGGESTED MATING

PCB LAYOUT

SUGGESTED SMT

PCB LAYOUT

PACKING DETAILS

Single Compression Contact:

Board-to-Board (BTB)

Series 70-9155

70-9155-001-610-006

NOMINAL WORKING HEIGHT 1.50MM

NOTES:

1. 9155 LOW PROFILE CONTACT, WORKING HEIGHT 0.75MM TO 1.25MM.

2. FOR FULL DETAILS REFER TO PRODUCT SPECIFICATION 201-01-153 AND

APPLICATIONS NOTES 201-01-154.

3. MATERIAL: COPPER ALLOY 0.2MM THICK.

4. PLATING: NICKEL ALL OVER WITH GOLD ON CONTACT NOSE AND TIN ON THE

REMAINDER. PARTS TO BE PACKED IN TAPE AND REEL. QTY PER REEL 3000.

5. OUTLINE OF CONNECTOR, ORIENTATION END “A”.

6. AREA TO KEPT FREE OF SOLDER RESIST, FURTHER INFORMATION IN

APPLICATION NOTES.

7. AREA BETWEEN PADS TO BE KEPT CLEAR OF TRACKS AND COMPONENTS.

8. SMT PADS PLATED TIN.

9. MATING PAD PLATED GOLD OVER NICKEL.

FULLY DEFLECTED

CONTACT

SUGGESTED MATING

PCB LAYOUT

SUGGESTED SMT

PCB LAYOUT

PACKING DETAILS

Single Compression Contact:

Board-to-Board (BTB)

Series 70-9155

9162 Slide-In SIM Card Connector

Standard SMT Contact Layout Narrow SMT Contact Layout

16.4 (0.646)

15.7

(0.618)

0.06

(0.002)

1.74

(0.069)

10.36

(0.408)

12.16

(0.479)

6.12 (0.241)

7.92 (0.312)

8.66 (0.341)

10.46 (0.412)

11.2 (0.441)

13.0 (0.512)

16.4 (0.646)

15.7

(0.618)

0.25

(0.010)

1.75

(0.069)

10.35

(0.407)

11.85

(0.467)

6.52 (0.257)

7.52 (0.296)

9.06 (0.357)

10.06 (0.396)

11.6 (0.457)

12.6 (0.496)

GENERAL DESCRIPTION

The standard SIM connector is specifically designed for handheld devices

requiring secure subscriber identification.

Following on from the introduction of our standard SIM block with an offering

of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding

another standard to the 9162 series SIM connectors, the slide-in SIM.

Unlike SIM blocks which require SIM card guides to aid insertion, removal and

retention of the SIM card, the slide-in SIM has guides as part of the connector

mold design.

Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles.

Our contact design is specifically rounded to avoid any possible damage

during and after card insertion to the card itself, assuming normal use. The

design also incorporates protection features to avoid contact damage during

this operation such as contact snagging.

Please contact the appropriate sales office for further details of this service.

KEY FEATURES AND BENEFITS

• Produced for use with mini SIM cards.

• The insulator is molded from high temperature plastic enabling the

connector to be used in convection or infrared soldering processes.

• Supplied on tape and reel packaging for pick and place assembly.

• The all plastic design, assuming normal use prevents damage to the

SIM card on insertion.

• Optional SMT contact size:

Standard SMT contact size – 1.60mm x 1.60mm

Narrow SMT contact size – 1.05mm x 0.60mm

• RoHS Compliant available.

HOW TO ORDER

SECTION Z-Z

+0.00 /+0.15

(0.000 / +0.006)

0.60 ±0.10

(0.024 / +0.004)

6.05

(0.238)

12.02

(0.473)

0.20 H

1.75 (0.069)

CONNECTOR

HEIGHT

5.10 – 5.60

(0.201 – 0.220)

12.9 – 13.4

(0.508 – 0.528)

16.4 (0.646)

11.4 (0.449)

15.7

(0.618) 15.2

(0.598)

4.85

(0.191)

SECTION T-T

0.60

(0.024)

0.93

(0.037)

15.1 (0.594)

Connector Height 1.75mm

9162 Slide-In SIM Card Connector

Prefix

00 = Standard

58 = Special

9162

Series

006

No. of Contacts

006 = 6

SIM Type

20 = Standard SMT

Footprint

21 = Narrow SMT

Footprint

2X 6

Plating Options

Selective Gold,

Pure Tin Tail

XXX

Connector Height

XXX refers to

Connector Height

175 = 1.75mm stack height

Standard Narrow

A1.46 (0.057) 1.05 (0.041)

B1.60 (0.063) 0.60 (0.024)

9162 SIM Card Block

GENERAL DESCRIPTION

The standard SIM connector is specifically designed for handheld devices

requiring secure subscriber identification.

The connectors are available in a standard 6 pin configuration on a 2.54mm

pitch with a 0.8mm height.

Contacts are stamped, gold plated, rated at 0.5A, and 5000 mechanical

cycles.

Our contact design is specifically rounded to avoid any possible damage

during and after card insertion to the card itself, assuming normal use. The

design also incorporates protection features to avoid contact damage during

this operation such as contact snagging.

Please contact the appropriate sales office for further details.

KEY FEATURES AND BENEFITS

• Produced for use with both full ISO cards and mini SIM cards.

• The insulator is molded from high temperature plastic enabling the

connector to be used in convection or infrared soldering processes.

• Supplied on tape and reel packaging for pick and place assembly.

• RoHS Compliant.

0.8mm PCB Pad Layout

PCB PADS

(6 POSITIONS)

1.10 (0.043)

TYP

15.20 (0.598)

0.77 (0.030)

TYP

1.00

(0.039)

1.00

(0.039)

2 PITCHES

@ 2.540 = 5.08

(0.100 = 0.200)

Connector Height 0.8mm

Illustration of Pin Configuration

12.10 (0.476)

0.60

(0.024)

0.80

(0.031) 8.64 (0.340)

ALL CONTACT TAILS WITHIN

0.10mm COPLANARITY TOLERANCE

2 PITCHES

@ 2.540 = 5.08

(0.100 = 0.200)

15.00 (0.591)

7.62 +0.25 -0

(0.300 +0.010 -0)

0.670 (0.026)

REF TYP

0.19 (0.007)

TYP

1.00 (0.039)

TYP

PIN 1

HOW TO ORDER

Prefix

9162

Series

006

Number of Contacts

006

SIM Type

006 = Selective Gold,

Pure Tin Tail

080

Connector Height

080 = 0.8mm stack height

9162 SIM Card Block

9162 SIM Connector

with Locking Latch

GENERAL DESCRIPTION

For 9162 Slide-IN & 9162 SIM/microSD

• Accepts GSM Standard 11.11 cards

• Secure locking latch mechanism

• Robust, good resistance against shock and vibration

• SIM Installed Height – 1.50mm

• Polarized to eliminate improper insertion of the card

KEY FEATURES AND BENEFITS

• SMT with locking hinged guide

• 2.50mm connector height

• Selective gold on mating surface/tin on solder tails

• Tape and reel packaging

HOW TO ORDER

Prefix

9162

Series

006

Number of

Contacts

150

SIM Height

Height of SIM Card: 1.50 (0.059)

7.90

(0.311)

0.95

(0.037)

3.65

(0.144)

2.50

(0.098)

7.55

(0.297)

2.54

(0.100)

5.08

(0.200)

3.30

(0.130)

ELCO

SIMLOCK

OPENOPEN

3.30

(0.130)

17.2

(0.677)

9.64

(0.380)

5.00

(0.197)

26.5 (1.043)

30.0 (1.181)

13.3

(0.524)

15.5

(0.610)

Ø3.00 (0.118)

PICK UP AREA

LOCKED COVER

UNLOCKED COVER

7.40

(0.291)

REF

1.90

(0.075)

TYP

1.70±0.05

(0.067±0.002)

TYP

1.40±0.05

(0.055±0.002)

TYP 17.2

(0.677)

REF

0.40

(0.016)

REF

5.50

(0.217)

12.2 (0.480)

15.2 (0.598)

27.4 (1.079)

5.50

(0.217)

2.54±0.05

(0.100±0.002)

5.08±0.05

(0.200±0.002)

30.0 (1.181) REF

SIM PAD NUMBER TO

GSM 11.11 (ISO 7810)

CONNECTOR PROFILE

NO PCB TRACKS IN

THESE AREAS

24.4

(0.961)

9.50

(0.374)

7.60

(0.299)

MAXIMUM COPLANARITY 0.10 (0.004)

BETWEEN CONTACT PADS

4º TO 180º ANGLE

FOR CARD INSERTION

1.50 (0.059)

SIM HEIGHT

0.27 (0.011)

MATING POSITION

Suggested PCB Layout

SIM Type

30 = SMT with Locking

Hinged SIM Guide

30 1

Contact Plating

Selective Gold on

Contact Surface and

Tin on Solder Tails

9162 Slide-In Low Profile

SIM Connector

GENERAL DESCRIPTION

• Six position Slide-In SIM

• Low Profile – 0.70mm to SIM base

• Side bracket to add solder security

• SIM guidance using the side walls

KEY FEATURES AND BENEFITS

• SMT Slide-In SIM

• Molded in high temperature LCP

• 0.38μm Gold on contact surface and gold flash on contact tails

• 1.60mm connector height

• Tape & Reel packaging

15.65 (0.616)

2.54

(0.100)

2.54

(0.100)

7.78

(0.306)

5.98

(0.235)

5.08

(0.200)

16.7

(0.657)

16.45

(0.648) 5.08

(0.200)

3.00

(0.118)

5.08

(0.200)

REF

1.20

(0.047)

TYP

1.80

(0.071)

TYP

1.80

(0.071) 7.90

(0.311)

16.7

(0.657)

1.50

(0.059)

TYP

2.54

(0.100)

TYP

2.10 (0.083) TYP

12.05 (0.474)

0.08

(0.003)

1.60

(0.063)

15.2

(0.598)

0.85

(0.033)

0.70 (0.028)

MATED CARD

Suggested PCB Layout

HOW TO ORDER

Prefix

9162

Series

006

Number of

Contacts

070

SIM Height

Height of SIM Card: 0.70 (0.028)

SIM Type

40 = SMT, Slide-in SIM

40 1

Contact Plating

0.38μm Gold on Contact

Surface and Gold Flash on

Solder Tails. Underplated

1.27μm Nickel.

9162 SIM/microSD Micro

Combination Connector

GENERAL DESCRIPTION

• Six position slide-in SIM connector & Push-Push microSD connector

• Allows two cards to be inserted into the same connector

• Card detect switch on the microSD

KEY FEATURES AND BENEFITS

• Space saving connector combination

• Integrates 2 connectors into 1

• Contact Plating: Gold

• Insulator molded from LCP UL94 V-O

• Low profile 1.50mm to SIM

• 2.70mm connector height

17.3

(0.681)

3.17

(0.125)

1.00

(0.039)

0.45

(0.018)

3.13

(0.123)

0.85

(0.033)

0.78

(0.031)

17.15

(0.675)

1.18

(0.046)

(0.106 )

2.70

1.70

(0.067)

6.35 (0.250)

REF

0.60 (0.024)

TYP

1.75 (0.069)

TYP

4.47

(0.176)

0.40

(0.016)

TYP

7.70

(0.303)

REF

0.60 (0.024)

MAX

16.53 (0.651)

+0.10

-0.05

+0.004

-0.002

5 PITCHES

@ 1.27 = 6.35

(0.050 = 0.250)

7 PITCHES

@ 1.10 = 7.70

(0.043 = 0.303)

SLOT FOR

SIM CARD

SIM TERMINALS

microSD

TERMINALS

SWITCH

TERMINALS

SLOT FOR

microSD Card

HOW TO ORDER

Prefix

9162

Series

006

Number of

Contacts

150

SIM Height

Height of SIM Card: 1.50 (0.059)

SIM Type

50 = SMT with SIM

and microSD

Slots at 90º

50 1

Contact Plating

Gold Plating over Nickel

9162 SIM/microSD Micro

Combination Connector

15.8 (0.622)

1.95

(0.077)

4.90

(0.193)

4.45

(0.175)

13.48

(0.531)

0.83

(0.033)

2.90

(0.114)

2.45

(0.096)

1.10

(0.043)

TYP

0.85

(0.033)

1.70

(0.067)

7.70

(0.303)

17.9

(0.705)

1.10

(0.043)

17.15

(0.675)

6.35 (0.250)

8.30 (0.327)

15.58 (0.613)

1.27 (0.050)

TYP 0.45 (0.018)

TYP

2 LOCATING HOLES

0.50

(0.020)

TYP

2 SWITCH

PADS

0.60 x 0.85

(0.024 x 0.033)

6 SIM

PADS

0.90 x 1.09

(0.035 x 0.043)

Numbering

8 microSD

PADS

0.60 x 0.85

(0.024 x 0.033)

Numbering

152637

5.00 ± 0.20

(0.197 ± 0.008)

microSD Card - UNLOCK

1.90 ± 0.20

(0.075 ± 0.008)

microSD Card - LOCK

1.00 ± 0.20

(0.039 ± 0.008)

microSD Card - PUSH

27.1

(1.067)

REF

11.0

(0.433)

15.0 (0.591)

18.43 (0.726)

16.53 (0.651)

0.79

(0.031)

2.70

(0.106)

17.3

(0.681)

9.80

(0.386)

1.50 (0.059) MAXIMUM

CLEARANCE UNDER

SIM CARD

4.00

(0.157)

3 (0.726)

32.53 (1.281)

4.00

(0.157)

11.0

(0.433)

44.6

(1.756)

27.5

(1.083)

0.75

(0.030)

17.3

(0.681)

16.0 (0.630)

15.0 (0.591)

TOP OF CARD

16.53 (0.651)

152637

NO CLEARANCE UNDER microSD Card

Connector on PCB Recommended PCB Layout

PCB SPACE USED BY CONNECTOR

CARDS FULLY INSERTED

CARDS EXTRACTED

(Shown for reference only)

CONTACT FUNCTIONS (ISO7816):

1. Supply Voltage Vcc

2. Reset

3. Clock

5. Ground

6. Program Voltage Vpp

7. I/O

MICRO SD FUNCTIONS:

S. Switch

1. DAT 2

2. CD/DAT 3

3. CMD

4. Vdd

5. Clock

6. Vss

7. DAT 0

8. DAT 1

9158 SOLO STACKER

GENERAL DESCRIPTION

The MOBO®series 9158 is a one-piece connector used to connect two PCBs

within mobile phones, pagers, PDAs, security, handheld scanners, etc. in a

cost-effective manner.

A standard range is available with 16, 20, 24 and 28 contacts to suit stack

heights of 1.90mm to 3.30mm. Other contact variants are also available up to

5.10mm, in custom housings. The SOLO STACKER can allow a spacing

tolerance of up to ±0.30mm and still provide reliable connections between the

PCBs, even if they are not parallel.

SOLO STACKER is designed for PCB surface mounting and is supplied in

tape and reel packaging. Gold plated pads on the mating PCB or suitable flex

circuits provide connection between the boards.

Whatever your requirements this SOLO STACKER can also be customized to

suit your applications.

KEY FEATURES AND BENEFITS

Single piece Connector – no mating half connector required to connect

two boards together which means:

• Reduced assembly time.

• Only one part to purchase and stock.

• Due to the unique contact design, the mating device does not have to

be parallel.

• Extremely robust when subjected to shock and vibration.

• Cost effective.

• Helps reduce tolerance accumulation within system.

APPLICATIONS

Suitable applications include:

• Mobile Phones

• PDA

• Medical

• PMR

• Industrial

• Security

• Handheld Scanner

DRAWINGS AND DIMENSIONS

“B”

Ø 1.15

(0.045)

TYP

0.95 (0.037) REF

WEEK/YEAR

CODE

2.70

(0.106)

MAX

AVAILABLE VACUUM

PLACEMENT AREA

7.00 (0.276)

2.70

(0.106)

4.00 (0.157)

6.00 (0.236)

4.80 (0.189)

1.90

(0.075)

0.04

(0.002)

4.20

(0.165)

3.70 - 4.00

(0.146 - 0.157)

FOR VERSION STACK HEIGHT 030

0.40 (0.016)

0/+0.20

(0/+0.008)

ALL TAILS WITHIN 0.15 (0.006) MAX COPLANARITY TOLERANCE

CONTACT PITCH 1.0 (0.039)

“A”

7.00 (0.276)

2.70

(0.106)

6.00 (0.236)

4.00 (0.157) 1.05

(0.041)

1.80

(0.071)

3.30

(0.130)

FOR VERSION STACK HEIGHT 020 & 025

Number of

Part Number A B

Positions

16 00-9158-016-XXX-XXX 7 9.00

20 00-9158-020-XXX-XXX 9 11.00

24 00-9158-024-XXX-XXX 11 13.00

28 00-9158-028-XXX-XXX 13 15.00

A = Number of contact pitches at 1mm

B = Connector Length

XXX

No of

Ways

16 = 016

20 = 020

24 = 024

28 = 028

XXX

Stack Height

020 = 1.9mm to 2.1mm

025 = 2.1mm to 2.7mm

030 = 2.8mm to 3.3mm

Plating Variation

06 = Selective Gold

0.25μm

Gold Plated

Contact Nose,

Pure Tin Tail

HOW TO ORDER

Prefix

00 = Standard

9158

Series

PCB Location Bosses

1 = With PCB Location Bosses

2 = Without PCB Location Bosses

CONTACT PITCH 1.0 (0.039)

Ø 1.40

(0.055)

PAD 0.70 x 1.70

(0.028 x 0.067)

GOLD PLATED

“B”

6.00

(0.236)

KEEP THESE AREAS

FREE FROM

SOLDER RESIST

“A”

CONTACT PITCH 1.0 (0.039)

Ø 1.40*

(0.055)

PAD 0.70 x 1.70

(0.028 x 0.067)

GOLD PLATED

“B”

KEEP THESE AREAS

FREE FROM

SOLDER RESIST

6.60

(0.260)

CONTACT PITCH 1.0 (0.039)

5.40

(0.213)

PAD 0.60 x 1.00

(0.024 x 0.039)

TIN PLATED

Mating PCB Footprint

for version stack height 020 & 030

Mating PCB Footprint

for version stack height 025

*Used for Boss versions only. BDim

16 6.00 (0.236)

20 8.00 (0.315)

24 10.00 (0.394)

28 12.00 (0.472)

Mating Standard Positions Special Positions*

Height 16 20 24 28 4 18 30 32 40

2mm X X X X

3mm X X X X X

4mm X X X

5mm X

Mating PCB Postions

SMT PCB

2mm

(0.079)

3mm

(0.118)

4mm

(0.157)

5mm

(0.197)

Other sizes available on request.

*Please consult with factory for availability.

9158 SOLO STACKER

SMT PCB Footprint

9188 Staggered SOLO Stacker

GENERAL DESCRIPTION

The SOLO series 9188 is a one-piece connector used to con-

nect two PCBs in a cost effective manner.

A standard range is available with 4, 6, 8 staggered contacts to

suit stack heights of 1.1mm to 2.1mm (see table below).

SOLO Stacker is designed for PCB surface mounting and is

supplied in tape and reel packaging. Gold plated pads on the

mating PCB or suitable flex circuits provide connection between

the two boards.

KEY FEATURES AND BENEFITS

Single piece connector – no mating half required to connect

two boards together which means:

• Reduced assembly time

• Only one part to purchase and stock

• Due to the unique contact design, the mating device does

not have to be parallel

• Helps reduce tolerance accumulation within system

APPLICATIONS

Suitable applications include:

• Handheld Devices:

- Phones

- Scanners

- Radios

- Medical Diagnostic

- Security Devices

HOW TO ORDER

Prefix

9188

Series

012

Stack Height

Code Height No. of Ways

012 1.1mm to 1.3mm 4 only

020 1.9mm to 2.1mm 6 & 8 only

062

Plating Variation

06 = Selective Gold

0.25μm

Gold Plated

Contact Nose,

Pure Tin Tail

No Bosses

004

No. of Ways

Code No. of Ways

004 4

006 6

008 8

9188 Staggered SOLO Stacker

4 Way Staggered Stacker

2.00

(0.079)

2.50

(0.098)

5.20 (0.205)

Ø 1.48 (0.058)

AVAILABLE VACUUM

PLACEMENT AREA

1.00

(0.039)

TYP

0.485

(0.019)

TYP

0.00/0.20

(0.000/0.008)

0.40

(0.016)

TYP ALL TAILS WITHIN

0.10 (0.004) MAXIMUM

COPLANARITY TOLERANCE

4.00 (0.157)

PAD 0.60 x 1.00

(0.024 x 0.039)

PURE TIN PLATED

(4 POSITIONS)

1.00

(0.039)

TYP

1.90

(0.075) 2.00

(0.079)

4.00 (0.157)

4.10

(0.161)

5.30 (0.209)

PAD 0.90 x 1.70

(0.035 x 0.067)

GOLD PLATED

(4 POSITIONS)

KEEP THIS

AREA FREE

FROM SOLDER

RESIST

1.00

(0.039)

TYP

2.00

(0.079)

2.00

(0.079)

1.20

(0.047)

2.06

(0.081)

REF

1.60

(0.063)

REF

1.00

(0.039)

2.50

(0.098)

3.00

(0.118)

1.90/2.20

(0.075/0.087)

NOMINAL WORKING HEIGHT

CONTACT NOSE HEIGHT

MATING CONDITION

SMT PCB FOOTPRINT MATING PCB FOOTPRINT

SECTION ON X - X

9188 Staggered SOLO Stacker

6 Way Staggered Stacker

2.00

(0.079)

2.80

(0.110)

Ø 1.48 (0.058)

AVAILABLE VACUUM

PLACEMENT AREA

1.00

(0.039)

TYP

7.20 (0.283)

0.485

(0.019)

TYP

0.00/0.20

(0.000/0.008)

0.40

(0.016)

TYP ALL TAILS WITHIN

0.10 (0.004) MAXIMUM

COPLANARITY TOLERANCE

1.90

(0.075)

3 PITCHES

@ 2.00 = 6.00

(0.079 = 0.236)

1.00

(0.039)

TYP

4.00 (0.157)

PAD 0.60 x 1.00

(0.024 x 0.039)

PURE TIN PLATED

(6 POSITIONS)

3 PITCHES

@ 2.00 = 6.00

(0.079 = 0.236)

1.00

(0.039)

TYP

4.00 (0.157)

4.10

(0.161)

2.00

(0.079)

7.30 (0.287)

PAD 0.90 x 1.70

(0.035 x 0.067)

GOLD PLATED

(6 POSITIONS)

KEEP THIS

AREA FREE

FROM SOLDER

RESIST

2.00

(0.079)

NOMINAL WORKING HEIGHT

2.04

(0.080)

REF

1.64

(0.065)

REF

1.70

(0.067)

2.50

(0.098)

3.00

(0.118)

2.47/2.75

(0.097/0.108)

CONTACT NOSE HEIGHT

MATING CONDITION

SMT PCB FOOTPRINT MATING PCB FOOTPRINT

SECTION ON X - X

9188 Staggered SOLO Stacker

8 Way Staggered Stacker

2.00

(0.079)

2.80

0.110)

Ø 1.48 (0.058)

AVAILABLE VACUUM

PLACEMENT AREA

1.00

(0.039)

TYP

9.20 (0.362)

0.485 (0.019)

TYP

0.40

(0.016)

TYP ALL TAILS WITHIN

0.10 (0.004) MAXIMUM

COPLANARITY TOLERANCE

0.00/0.20

(0.000/0.008)

1.00 (0.039)

TYP

PAD 0.60 x 1.00

(0.024 x 0.039)

PURE TIN PLATED

(8 POSITIONS)

1.90

(0.075)

3 PITCHES

@ 2.00 = 6.00

(0.079 = 0.236)

2.00

(0.079)

TYP

4.00 (0.157)

2.00

(0.079)

TYP

4.00 (0.157)

1.00 (0.039)

TYP

PAD 0.90 x 1.70

(0.035 x 0.067)

GOLD PLATED

(8 POSITIONS)

4.10

(0.161)

2.00

(0.079)

3 PITCHES

@ 2.00 = 6.00

(0.079 = 0.236)

9.30 (0.366)

KEEP THIS

AREA FREE

FROM SOLDER

RESIST

1.64

(0.065)

REF

1.70

(0.067)

2.50

(0.098)

3.00

(0.118)

2.45/2.75

(0.096/0.108)

2.00

(0.079)

NOMINAL WORKING HEIGHT

2.04

(0.080)

REF

MATING CONDITION

SMT PCB FOOTPRINT MATING PCB FOOTPRINT

SECTION ON X - X

9258 Ultra Low Profile Stacker

GENERAL DESCRIPTION

The SOLO series 9258 is a one-piece connector used to con-

nect two PCBs in a cost effective manner.

This connector is a 1.0mm pitch available in an 8 position with

stack heights of 0.40mm and 0.80mm. It is available with or

without location bosses.

This connector is designed for PCB surface mounting and is

supplied in tape and reel packaging. Gold plated pads on the

mating PCB or suitable flex circuits provide connection between

the boards.

KEY FEATURES AND BENEFITS

Single piece connector – no mating half connector required to

connect two boards together which means:

• Reduced assembly time

• Only one part to purchase and stock

• Due to the unique contact design, the mating device does

not have to be parallel

• Extremely robust when it comes to shock and vibration

APPLICATIONS

Suitable applications include:

• Mobile phones

• Handheld scanners

• Portable medical devices

• Display interface

008

No of

Ways

XXX

Stack Height

004 = 0.40mm

008 = 0.80mm

Plating Variation

06 = Selective Gold

0.25μm

Gold Plated

Contact Nose,

Pure Tin Tail

HOW TO ORDER

Prefix

00 = Standard

9258

Series

PCB Location Bosses

1 = With Mating PCB Location Bosses (top side)

2 = Without PCB Location Bosses

3 = With SMT PCB Location Bosses (bottom side)

4 = With SMT and Mating PCB Location Bosses

(top and bottom sides)

9258 Ultra Low Profile Stacker

0.4mm Ultra Low Profile Stacker 0.8mm Ultra Low Profile Stacker

0.40

(0.016) 1.00

(0.039)

1.50

(0.059)

Ø1.00

(0.039)

1.00 - 1.30

(0.039 - 0.051)

1.67 - 0.10

(0.066 - 0.004)

0.70

(0.028)

Ø1.20

(0.047)

5.70

(0.224)

0.80 (0.031)

0.10

(0.004)

CONNECTOR

OUTLINE

9.35 (0.386)

1.68 (0.066)

7 PITCHES

@ 1.00 = 7.00

(0.039 = 0.276)

6.00

(0.236)

5.50

(0.217)

0.35

(0.014)

9.35

(0.368)

0.65

(0.026)

R 0.50 (0.020)

(4 POSITIONS)

10.35

(0.407)

7 PITCHES

@ 1.00 = 7.00

(0.039 = 0.276)

ALL TAILS TO BE WITHIN

0.10 (0.004) MAXIMUM

COPLANARITY TOLERANCE

0.40

(0.016) 1.00

(0.039)

0.80

(0.031)

1.90

(0.075)

Ø1.00

(0.039)

1.40 - 1.70

(0.055 - 0.067)

1.85 - 0.10

(0.073 - 0.004)

6.00

(0.236)

5.50

(0.217)

0.35

(0.014)

9.35

(0.368)

0.65

(0.026)

R 0.50 (0.020)

(4 POSITIONS)

10.35

(0.407)

Ø2.00

(0.079)

PROPOSED SMT PCB LAYOUT

ALL PADS PURE TIN PLATE WITH MATING PCB

LOCATION BOSSES

(TOP SIDE)

WITHOUT PCB

LOCATION BOSSES

WITH SMT PCB

LOCATION BOSSES

(BOTTOM SIDE)

WITH PCB AND SMT

LOCATION BOSSES

Ø1.20

(0.047)

1.68

(0.066)

2.75

(0.108)

9.35 (0.368)

0.70 (0.028)

7 PITCHES

@ 1.00 = 7.00

(0.039 = 0.276)

CONNECTOR

OUTLINE

PROPOSED MATING PCB LAYOUT

ALL PADS GOLD PLATE

9157 I/O Connector

GENERAL DESCRIPTION

The 9157 series was specifically designed for portable equipment.

AVX now offers this two-part system as a standard product. The fixed SMT

socket is designed to be housed within the confined dimensional constraints

of the portable device.

The plug/cover connector has sprung contacts and is designed for termina-

tion to accessory equipment. The connector is designed to house fifteen

signal contacts on a 1mm pitch rated at 1.5A. There is the option to include a

switching RF coax.

A cradle SMT plug connector for docking applications is also available as

standard and has the option of including a SMT RF coax.

Whatever your requirements, the 9157 series can also be customized to suit

your application.

KEY FEATURES AND BENEFITS

• Patented 20º angled face on the socket gives self-cleaning face when

mated with plug.

• Metal Latching area integral to socket which saves PCB real estate.

• Integral to socket is a mechanical 50Ω switching coax for SMT

termination.

• Single sprung plug contact design gives ten thousand mating cycles

and cleaning/wiping action.

• Customer has option to terminate own RF coax using AVX custom tool-

ing: 06-9157-7116-01-000.

• SMT plug has unique location pyramids that give positive alignment to

portable device, and assist blind mating.

• RoHS Compliant.

APPLICATIONS

Suitable applications include:

• Mobile Phones

• PDA

• Medical

• Docking/Charging for any

portable device

9157 I/O Connector

Plug Wire with Coax Plug Wire without Coax

28.80 (1.134) 3.72

(0.146)

25.80 (1.016)

1.50

(0.059)

8.30

(0.327)

4.20

(0.165)

5.50

(0.217)

MAX

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

1.00 (0.039)

28.80 (1.134)

3.72

(0.146)

25.80 (1.016)

B4.20

(0.165)

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

1.00 (0.039)

1.50

(0.059)

SMT CAP SHOWN ON

2 VIEWS ONLY

28.80 (1.134)

25.80 (1.016)

4.25

(0.167)

SMT CAP SHOWN ON

2 VIEWS ONLY

1.50

(0.059)

28.80 (1.134)

25.80 (1.016)

4.25

(0.167)

4.15

(0.163)

3.00

(0.118)

SUGGESTED PCB LAYOUT

2 THRU HOLES

Ø 2.00 (0.079)

22.80 (0.898)

1.97

(0.059)

2.40 (0.094)

15 PADS @ 0.60 x 1.50

15 PADS @ (0.024 x 0.094)

14 PITCHES @ 1.00 = 14.00

(0.039 = 0.551)

SMT Plug with Coax SMT Plug without Coax

SUGGESTED PCB LAYOUT

2 THRU HOLES

Ø 2.00 (0.079)

22.80 (0.898)

1.97

(0.059)

3.32

(0.131)

2.65

(0.104)

2.40 (0.094)

15 PADS @ 0.60 x 1.50

15 PADS @ (0.024 x 0.094)

14 PITCHES @ 1.00 = 14.00

(0.039 = 0.551)

0.9 x 2.50 PAD

2 POSNS

Ø 1.20 (0.047) PAD

9157 I/O Connector

SMT Socket with Coax SMT Socket without Coax

31.50 (1.240)

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

5.75

(0.226)

1.50

(0.059)

1.50

(0.059)

R0.50 4 POSITIONS

5.50

(0.217)

5.00

(0.197)

8.00

(0.315)

13.00 (0.512)

26.60 (1.047)

28.50 (1.122)

31.50 (1.240)

1.50

(0.059)

1.50

(0.059)

5.50

(0.217)

8.00

(0.315)

26.60 (1.047)

28.50 (1.122)

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

CLEARANCE HOLE Ø 1.20 (0.047)

TAPERED TO Ø 1.00 X 2.00 DEEP

5.00

(0.197)

(0.039) X (0.079)

31.50 (1.240) REF

0.10 (0.004) CLEARANCE

1.0 (0.039)

PLATED THRU HOLE

(2 POSITIONS)

28.50 (1.122) REF

5.60

(0.220)

REF

4.10

(0.161)

REF

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

4.30 (0.169)

1.05 (0.041)

2.45 (0.096) PAD 0.50 X 1.35

(0.020 X 0.053)

(19 POSITIONS)

4.20 (0.165)

12.80 (0.504)

MAX

1.80

(0.071)

0.71

(0.028) 3.50

(0.138)

0.31 (0.012)

0.8 (0.031) SQUARE PAD

(2 POSITIONS)

PAD 0.50 x 1.35

(0.020 X 0.053)

(15 POSITIONS)

31.50 (1.240) REF

0.10 (0.004) CLEARANCE

28.50 (1.122) REF

5.60

(0.220)

REF

4.10

(0.161)

REF

26.60 (1.047)

1.0 (0.039)

PLATED THRU HOLE

(2 POSITIONS)

14 PITCHES

@ 1.00 = 14.00

(0.039 = 0.551)

4.30 (0.169)

4.90 (0.193)

12.80 (0.504)

MAX

1.80

(0.071)

0.71

(0.028) 3.50

(0.138)

0.31 (0.012)

0.8 (0.031) SQUARE PAD

(2 POSITIONS)

SMT PAD LAYOUT

015

No of

Ways

15 = 015

006

Contact Type

006 = Solder Wire

007 = SMT

HOW TO ORDER

Plug Options – Example

Prefix

10 = Plug

58 = Special

9157

Series

000

RF Coax Option

000 = No RF Coax

001 = With RF Coax

015

No of

Ways

15 = 015

006

Contact Type

006 = SMT

Socket Options – Example

Prefix

20 = Socket

58 = Special

9157

Series

000

RF Coax Option

000 = No RF Coax

001 = With RF Coax

9700

Cover Version

9700 = Screw/Press-fit

Version

000

Grommet Variation

000 = No Grommet

035 = to suit ␾3.50 cable

050 = to suit ␾5.00 cable

Cover Options – Example * Parts supplied in kit form

Prefix

30 = Sub Assembly

58 = Special

9157

Series

Standard

Note: Application tooling to terminate coax cable 06-9157-7116-01-000.

Patent: 2276285

5540599

Cover Kit

32.20 (1.268) REF 7.30

(0.287)

REF

PLUG 10-9157-019-XXX-006

35.05

(1.380)

REF 28.58

(1.125)

REF

9157 I/O Connector

9157 MOBO®

19 Way I/O Connector

GENERAL DESCRIPTION

Based on our standard 15 way 9157 I/O family, AVX has now released a

family 19 way devices. This range includes a SMT 90 degree plug, a wire

socket version that is used with the standard 9157 cover and a SMT socket

for charging applications.

Options with the 90 degree SMT socket include the sealing of the connec-

tor contacts and the connector to the housing up to IP67. There is also an

option to have an EMLB (early mate, late break) on pins 1 and 19.

To achieve the seal to the device housing, it may be necessary to customize

the device housing design.

On the SMT 90 degree version, we also have the capability of an integrated

DC jack, enabling both the DC jack and the 19 way cover to be plugged in

at the same time.

Cover Kit

32.20 (1.268) REF 7.30

(0.287)

REF

PLUG 10-9157-019-XXX-006

35.05

(1.380)

REF 28.58

(1.125)

REF

AVAILABLE DEVICES:

10 9157 019 000 006 Plug wire version

10 9157 019 000 007 SMT charging version

20 9157 019 000 006 90 degree SMT socket

30 9157 97 XX 00 000 Cover options see page 39

9157 MOBO®

19 Way I/O Connector

SMT Plug

28.80 (1.134)

25.80 (1.016)

18.00 (0.709)

1.00

(0.039)

3.00 (0.118)

8.16 ±0.10

(0.321 ±0.004)

1.50 ±0.10

(0.059 ±0.004)

4.20 ±0.10

(0.165 ±0.004)

28.80 ±0.10

(1.134 ± 0.004)

SMT CAP TO BE FITTED

CENTRALLY ON CONNECTOR

SMT Socket SMT Plug

(Suggested PCB Layout)

R1.20 TYP

(R0.047 TYP)

17.00 (0.669)

28.50 (1.122)

26.60 (1.047)

31.50 (1.240)

5.75

(0.226)

22.00 (0.866)

1.50 (0.059)

5.00 (0.197)

5.50

(0.217)

8.00

(0.315)

Pin 1 and Pin 19 are early mate

late break contacts.

18 PITCHES @ 1.00 = 18.00

18 PITCHES @ (0.039 = 0.709)

SUGGESTED PCB LAYOUT

2 THRU HOLES

Ø 1.60 (0.063) 2 SMT PADS

Ø 5.40 (0.213) O/D

22.80 (0.898)

2.90

(0.114)

2.40

(0.094)

2.40 (0.094)

19 PADS @ 0.60 x 2.40

(19 PADS @ (0.024 x 0.094)

18 PITCHES

@ 1.00 = 18.00

(0.039 = 0.709)

SMT Socket

(Suggested PCB Layout)

SUGGESTED PCB LAYOUT

26.60 (1.047)

2 HOLES

Ø 1.00 (0.039)

2 PADS 0.80 x 0.80

(0.031 x 0.031) 19 PADS 0.50 x 1.35

(0.020 x 0.053)

16.80 MAX

(0.661 MAX) 4.90

(0.193)

1.80

(0.071)

3.50

(0.138) 0.71

(0.028) 0.31

(0.012)

R1.20

(R0.047)

4.30 (0.169)

18 PITCHES @ 1.00 = 18.00

18 PITCHES @ (0.039 = 0.709)

Plug Wire

9257 Reduced Size I/O Connector

GENERAL DESCRIPTION

An I/O interconnect system designed for portable equipment.

AVX offers this plug and socket reduced size system as a standard product.

The fixed SMT socket is designed to be mounted on a PCB and housed within

a portable device. The plug is designed for cable termination with options of

single and double sided contacts and customizing the overmold cover or parts

can be supplied as connector only for sub contract termination. The socket

connector houses 16 contacts in two rows on 1.25mm pitch with a rating of

1 amp per contact. Both connectors are RoHS compliant.

KEY FEATURES AND BENEFITS

• No latching is required due to the click design of the contacts.

• Optional customization of the overmold cover.

• Options of single row (8 way) or dual row (16 way) plug connector.

• Compact size to optimize PCB real estate.

• Metal outer cover provides integrated PCB location and solder tab.

• Positive alignment and orientation of the plug and socket.

• 5K mating cycles and 1 amp rated.

APPLICATIONS

Suitable applications include:

• Cellular Phones

• Handheld Devices

• Industrial Modules

• Medical Electronics

9257 Reduced Size I/O Connector

Single Sided 8 Way I/O Plug Connector

3.20

(0.126)

1.20

(0.047)

10.0 (0.394)

11.1 (0.437)

SECTION Z-Z

8.40

(0.331)

Dual Sided 16 Way I/O Plug Connector

3.20

(0.126)

8.40

(0.331)

1.20

(0.047)

10.0 (0.394)

11.1 (0.437)

SECTION A-A

25.08*

(0.987)

5.00

(0.197)

MIN

OVERMOLDING MUST BE

CLEAR OF 5.00 (0.197) MIN.

TO ENSURE FULL MATING

WITH SOCKET CONNECTOR

HOW TO ORDER

* Variable dimension to

suit customer design

and application.

016

No of Ways

016 = 16 way dual sided

008 = 8 way single sided

001

Contact

001 = Solder Bucket

Prefix

10 = Plug Connector

9257

Series

003

Plating Option

003 = 0.8μm Selective Gold,

Tin Tail

Notes:

1. All dimensions are for reference only unless toleranced.

2. For full product specification refer to AVX spec 201-01-089.

3. Parts packed in tube with 50 parts per tube.

Suggested Overmolding for Plug Connector

9257 Reduced Size I/O Connector

PCB Layout

3.00

(0.118) 0.25 (0.010) TYP

REAR VIEW

12.50 (0.492)

0.51

(0.020)

TYP

POLARIZATION

CHAMFER

FRONT VIEW

12.50 (0.492)

1.10 (0.043)

0.15 (0.006)

1.56 (0.061)

Ø 1.00 (0.039)

LOCATION HOLES

(2 POSITIONS)

1.80

(0.071)

TYP

1.20

(0.047)

2.70

(0.106)

2.90

(0.114)

1.15

(0.045)

TYP

CONNECTOR

OUTLINE

SMT PADS

0.40

(0.016)

TYP

15 PITCHES

@ 0.625 = 9.38

(0.025 = 0.369)

3.90

(0.154)

0.80

(0.031)

TYP

6.75 (0.266)

SOLDER BRACKET/SHIELD

LOCATION PEGS

SECTION Z - Z

END VIEW

016

No of

Ways

16 = 016

001

Contacts

001 = SMT Termination

Solder Bracket

01 = Solder Bracket

with location pegs

HOW TO ORDER

Prefix

20 = Socket Connector

9257

Series

Plating Option

3 = 0.8μm Selective Gold,

Tin Tail

Packing Details

Reel Qty. 1100

Pack Qty. 5500

Notes:

1. 16 Way I/O Socket.

2. For full product specification refer to AVX spec 201-01-089.

3. General tolerance ±0.20 (0.008) unless otherwise stated.

4. SMT feet within 0.13 (0.005) coplanarity.

16 Position I/O Socket

9257 Mini I/O Connector

GENERAL DESCRIPTION

AVX offers the 12 way mini I/O connector as a standard

product. The fixed SMT socket is designed to be mounted on

a PCB and housed within a portable device. The plug is

designed for cable termination with options of single and

double sided contacts. Parts can be supplied as connectors

only for sub contract termination, or with a custom overmold

cover. The socket connector houses 12 contacts in a single

row on 0.50mm pitch.

APPLICATIONS

• Medical Electronics

• Cellular Phones

• Industrial Modules

• Hand Held Devices

KEY FEATURES AND BENEFITS

• No latching required due to the click design of the

contacts.

• Optional customization of the overmold cover.

• Compact size to optimize PCB real estate.

• Metal outer cover provides integrated PCB location and

solder tab.

• Positive alignment and orientation of the plug and socket.

9257 Mini I/O Connector

012

No of

Ways

12 = 012

101

Contacts

101 = Solder Tail

006

Plating Option

006 = 0.25μm Gold

over Nickel

HOW TO ORDER

Prefix

10 = Plug Connector

9257

Series

9257 STANDARD 12 WAY MINI I/O PLUG

POSITION 12 POSITION 1

0.15 (0.006) TYP

11 EQUAL SPACES

@0.50 (0.020) =

5.50 (0.217)

7.55 (0.297)

0.20 (0.008) TYP

1.00 (0.039)

0.80 (0.031)

7.70 (0.303)

5.40 (0.213)

POSITION 12

POSITION 1

4.00 (0.157)

8.60 (0.339)

1.20 (0.047)

1.20

(0.047)

1.30 (0.051)

0.50 (0.020)

0.50

(0.020)

0.40

(0.016)

0.20 (0.008)

4.00

(0.157)

6.00

(0.236)

10.30

(0.406)

1.25

(0.049)

REF

1.85 (0.073)

1.55 (0.061)

9257 Mini I/O Connector

SUGGESTED OVERMOLDING FOR PLUG CONNECTOR

28.60*

(1.126)

5.00 (0.197)

MARKER

POSITION 1

POSITION 12 POSITION 1

DIMENSION MARKED WITH A * ARE

VARIABLE DIMENSION TO SUIT

CUSTOMER DESIGN AND APPLICATION

9257 Mini I/O Connector

9257 STANDARD 12 WAY MINI I/O SOCKET

012

No of

Ways

12 = 012

101

Contacts

101 = SMT Termination

Solder Bracket

01 = Solder Bracket

with location pegs

HOW TO ORDER

Prefix

20 = Socket Connector

9257

Series

Plating Option

6 =

0.25μm Gold over Nickel

10.84 (0.427)

8.20 (0.323)

0.18 (0.007) TYP

0.80

(0.031)

6.05

(0.238) 7.15

(0.281)

11 EQUAL SPACES

@0.50 (0.020) =

5.50 (0.217)

11 EQUAL SPACES

@0.50 (0.020) =

5.50 (0.217)

7.80 (0.307)

0.20 (0.008) TYP

8.40 (0.331)

POSITION 1

POSITION 12

2.95

(0.116)

2.00

(0.079)

1.00 (0.039)

5.18 (0.204)

1.57 (0.062)

0.05 (0.002) +0.10 (0.004)

–0.05 (0.002)

9.60 (0.378)

0.32

(0.013) TYP 1.70 (0.067) TYP

5.28

(0.208)

5.18

(0.204)

1.00 (0.039)

8.40 (0.331)

0.50 (0.020) TYP

1.00 (0.039) TYP

1.20

(0.047)

2.00

(0.079)

1.30

(0.051)

S-MOBO0M813-C

A KYOCERA GROUP COMPANY

http://www.avx.com

Contact:

AVX Greenville, SC

Tel: 864-967-2150

AVX Northwest, WA

Tel: 360-699-8746

AVX Midwest, IN

Tel: 317-861-9184

AVX Mid/Pacific, CA

Tel: 408-988-4900

AVX Northeast, MA

Tel: 617-479-0345

AVX Southwest, CA

Tel: 949-859-9509

AVX Canada

Tel: 905-238-3151

AVX South America

Tel: +55-11-4688-1960

AVX Limited, England

Tel: +44-1276-697000

AVX S.A.S., France

Tel: +33-1-69-18-46-00

AVX GmbH, Germany

Tel: +49-0811-95949-0

AVX SRL, Italy

Tel: +39-02-614-571

AVX Czech Republic

Tel: +420-57-57-57-521

AVX/ELCO UK

Tel: +44-1638-675000

ELCO Europe GmbH

Tel: +49-2741-299-0

AVX S.A., Spain

Tel: +34-91-63-97-197

AVX Benelux

Tel: +31-187-489-337

AVX/Kyocera (S) Pte Ltd.,

Singapore

Tel: +65-6286-7555

AVX/Kyocera, Asia, Ltd.,

Hong Kong

Tel: +852-2363-3303

AVX/Kyocera Yuhan Hoesa,

South Korea

Tel: +82-2785-6504

AVX/Kyocera HK Ltd.,

Taiwan

Tel: +886-2-2656-0258

AVX/Kyocera (M) Sdn Bhd,

Malaysia

Tel: +60-4228-1190

AVX/Kyocera International

Trading Co. Ltd.,

Shanghai

Tel: +86-21-3255 1933

AVX/Kyocera Asia Ltd.,

Shenzen

Tel: +86-755-3336-0615

AVX/Kyocera International

Trading Co. Ltd.,

Beijing

Tel: +86-10-6588-3528

AVX/Kyocera India

Liaison Office

Tel: +91-80-6450-0715

AMERICAS EUROPE ASIA-PACIFIC

KED Hong Kong Ltd.

Tel: +852-2305-1080/1223

KED Hong Kong Ltd.

Shenzen

Tel: +86-755-3398-9600

KED Company Ltd.

Shanghai

Tel: +86-21-3255-1833

KED Hong Kong Ltd.

Beijing

Tel: +86-10-5869-4655

KED Taiwan Ltd.

Tel: +886-2-2950-0268

KED Korea Yuhan Hoesa,

South Korea

Tel: +82-2-783-3604/6126

KED (S) Pte Ltd.

Singapore

Tel: +65-6509-0328

Kyocera Corporation

Japan

Tel: +81-75-604-3449

ASIA-KED

(KYOCERA Electronic Devices)

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

AVX:

009155002301006 589155004000074