To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. HD74AC175 Quad D-Type Flip-Flop REJ03D0257-0200Z (Previous ADE-205-377 (Z)) Rev.2.00 Jul.16.2004 Description The HD74AC175 is a high-speed quad D flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D inputs is stored during the Low-to-High clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D inputs, when Low. Features * Edge-Triggered D-Type Inputs * Buffered Positive Edge-Triggered Clock * Asynchronous Common Reset * True and Complement Output * Outputs Source/Sink 24 mA * Ordering Information Part Name Package Type Package Code Package Abbreviation Taping Abbreviation (Quantity) HD74AC175AFPEL SOP-16 pin (JEITA) FP-16DAV FP HD74AC175ARPEL SOP-16 pin (JEDEC) FP-16DNV RP EL (2,500 pcs/reel) HD74AC175TELL T ELL(2,000 pcs/reel) TSSOP-16 pin TTP-16DAV EL (2,000 pcs/reel) Notes: 1. Please consult the sales office for the above package availability. 2. The packages with lead-free pins are distinguished from the conventional products by adding V at the end of the package code. Pin Arrangement MR 1 16 VCC Q0 2 15 Q3 Q0 3 14 Q3 D0 4 13 D3 D1 5 12 D2 Q1 6 11 Q2 Q1 7 10 Q2 GND 8 9 CP (Top view) Rev.2.00, Jul.16.2004, page 1 of 7 HD74AC175 Logic Symbol D0 D1 D2 D3 CP MR Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 Pin Names D0 to D3 CP MR Q0 to Q3 Q0 to Q 3 Data Inputs Clock Pulse Input Master Reset Input True Outputs Complement Outputs Functional Description The HD74AC175 consists of four edge-triggered D flip-flops with individual D inputs and Q and Q outputs. The Clock and Master Reset are common. The four flip-flops will store the state of their individual D inputs on the Low-to-High clock (CP) transition, causing individual Q and Q outputs to follow. A Low input on the Master Reset (MR) will force all Q outputs Low and Q outputs High independent of Clock or Data inputs. The HD74AC175 is useful for general logic applications where a common Master Reset and Clock are acceptable. Truth Table Inputs @ tn, MR = H Dn L H H : L : tn : tn + 1 High Voltage Level Low Voltage Level Bit Time before Clock Pulse : Bit Time after Clock Pulse Rev.2.00, Jul.16.2004, page 2 of 7 Outputs @ tn+1 Qn L Qn H H L HD74AC175 Logic Diagram MR CP D3 D2 D D1 Q D CP Q CD Q D CP Q CD Q3 Q3 D0 Q D CP Q CD Q2 Q2 Q CP Q CD Q1 Q1 Q0 Q0 Please note that this diagram is provided only for the understanding of logic operations and should not be used to estimate propagation delays. Absolute Maximum Ratings Item Symbol Ratings -0.5 to 7 Unit V Supply voltage VCC DC input diode current IIK -20 20 mA mA DC input voltage DC output diode current VI IOK -0.5 to Vcc+0.5 -50 V mA DC output voltage VO 50 -0.5 to Vcc+0.5 mA V DC output source or sink current DC VCC or ground current per output pin IO ICC, IGND 50 50 mA mA Storage temperature Tstg -65 to +150 C Condition VI = -0.5V VI = Vcc+0.5V VO = -0.5V VO = Vcc+0.5V Recommended Operating Conditions Item Supply voltage Input and output voltage Operating temperature Input rise and fall time (except Schmitt inputs) VIN 30% to 70% VCC Rev.2.00, Jul.16.2004, page 3 of 7 Symbol VCC 2 to 6 Ratings V Unit VI, VO Ta 0 to VCC -40 to +85 V C tr, tf 8 ns/V Condition VCC = 3.0V VCC = 4.5 V VCC = 5.5 V HD74AC175 DC Characteristics Item Input Voltage Symbol VIH VIL Output voltage VOH VOL Ta = 25C Vcc (V) 3.0 min. 2.1 typ. 1.5 max. -- Ta = -40 to +85C min. max. 2.1 -- 4.5 5.5 3.15 3.85 2.25 2.75 -- -- 3.15 3.85 -- -- 3.0 4.5 -- -- 1.50 2.25 0.9 1.35 -- -- 0.9 1.35 5.5 3.0 -- 2.9 2.75 2.99 1.65 -- -- 2.9 1.65 -- 4.5 5.5 4.4 5.4 4.49 5.49 -- -- 4.4 5.4 -- -- 3.0 4.5 2.58 3.94 -- -- -- -- 2.48 3.80 -- -- 5.5 3.0 4.94 -- -- 0.002 -- 0.1 4.80 -- -- 0.1 4.5 5.5 -- -- 0.001 0.001 0.1 0.1 -- -- 0.1 0.1 3.0 4.5 -- -- -- -- 0.32 0.32 -- -- 0.37 0.37 Unit V Condition VOUT = 0.1 V or VCC -0.1 V VOUT = 0.1 V or VCC -0.1 V V VIN = VIL or VIH IOUT = -50 A VIN = VIL or VIH IOH = -12 mA IOH = -24 mA IOH = -24 mA VIN = VIL or VIH IOUT = 50 A VIN = VIL or VIH IOL = 12 mA IOL = 24 mA Input leakage current IIN 5.5 5.5 -- -- -- -- 0.32 0.1 -- -- 0.37 1.0 A VIN = VCC or GND IOL = 24 mA Dynamic output current* IOLD IOHD 5.5 5.5 -- -- -- -- -- -- 86 -75 -- -- mA mA VOLD = 1.1 V VOHD = 3.85 V Quiescent supply current ICC 5.5 -- -- 8.0 -- 80 A VIN = VCC or ground *Maximum test duration 2.0 ms, one output loaded at a time. AC Characteristics Item Symbol VCC (V)*1 Ta = +25C CL = 50 pF Min Typ Max Ta = -40C to +85C CL = 50 pF Min Max Unit Maximum clock frequency fmax 3.3 5.0 149 187 -- -- -- -- 139 187 -- -- MHz Propagation delay CP to Qn or Qn tPLH 3.3 5.0 1.0 1.0 9.5 7.0 12.0 9.0 1.0 1.0 13.5 9.5 ns Propagation delay CP to Qn or Qn tPHL 3.3 5.0 1.0 1.0 8.5 6.0 13.0 9.5 1.0 1.0 14.5 10.5 ns Propagation delay MR to Qn tPLH 3.3 5.0 1.0 1.0 7.5 5.5 12.5 9.0 1.0 1.0 13.5 10.0 ns Propagation delay MR to Qn tPHL 3.3 5.0 1.0 1.0 8.5 6.0 11.0 8.5 1.0 1.0 12.5 9.0 ns Note: 1. Voltage Range 3.3 is 3.3 V 0.3 V Voltage Range 5.0 is 5.0 V 0.5 V Rev.2.00, Jul.16.2004, page 4 of 7 HD74AC175 AC Operating Requirements Ta = +25C CL = 50 pF Item Set-up time, HIGH or LOW Symbol VCC (V)*1 Typ tsu 3.3 2.0 Dn to CP Hold time, HIGH or LOW th 5.0 3.3 Ta = -40C to +85C CL = 50 pF Guaranteed Minimum 4.5 4.5 ns 1.0 0 3.0 1.0 3.0 1.0 ns tw 5.0 3.3 0 2.5 1.0 4.5 1.0 4.5 ns MR pulse width, LOW tw 5.0 3.3 2.0 2.5 3.5 4.5 3.5 5.0 ns Recovery time MR to CP trec 5.0 3.3 2.0 -2.0 3.5 0.0 3.5 0.0 ns 5.0 -1.0 0.0 0.0 Dn to CP CP pulse width HIGH or LOW Note: Unit 1. Voltage Range 3.3 is 3.3 V 0.3 V Voltage Range 5.0 is 5.0 V 0.5 V Capacitance Item Input capacitance Power dissipation capacitance Rev.2.00, Jul.16.2004, page 5 of 7 Symbol CIN CPD Typ 4.5 45.0 Unit pF pF Condition VCC = 5.5 V VCC = 5.0 V HD74AC175 Package Dimensions As of January, 2003 Unit: mm 10.06 10.5 Max 9 1 8 1.27 *0.40 0.06 0.20 7.80 +- 0.30 1.15 0 - 8 0.10 0.10 0.80 Max *0.20 0.05 2.20 Max 5.5 16 0.70 0.20 0.15 0.12 M Package Code JEDEC JEITA Mass (reference value) *Ni/Pd/Au plating FP-16DAV -- Conforms 0.24 g As of January, 2003 Unit: mm 9.9 10.3 Max 9 1 8 0.635 Max *0.40 0.06 0.15 *0.20 0.05 1.27 0.11 0.14 +- 0.04 1.75 Max 3.95 16 0.10 6.10 +- 0.30 1.08 0 - 8 + 0.67 0.60 - 0.20 0.25 M *Ni/Pd/Au plating Rev.2.00, Jul.16.2004, page 6 of 7 Package Code JEDEC JEITA Mass (reference value) FP-16DNV Conforms Conforms 0.15 g HD74AC175 As of January, 2003 Unit: mm 4.40 5.00 5.30 Max 16 9 1 8 0.65 *0.20 0.05 1.0 0.13 M Rev.2.00, Jul.16.2004, page 7 of 7 *0.15 0.05 1.10 Max *Ni/Pd/Au plating 0.10 0.07 +0.03 -0.04 6.40 0.20 0.65 Max 0 - 8 0.50 0.10 Package Code JEDEC JEITA Mass (reference value) TTP-16DAV -- -- 0.05 g Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500 Fax: <1> (408) 382-7501 Renesas Technology Europe Limited. Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, United Kingdom Tel: <44> (1628) 585 100, Fax: <44> (1628) 585 900 Renesas Technology Europe GmbH Dornacher Str. 3, D-85622 Feldkirchen, Germany Tel: <49> (89) 380 70 0, Fax: <49> (89) 929 30 11 Renesas Technology Hong Kong Ltd. 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2375-6836 Renesas Technology Taiwan Co., Ltd. FL 10, #99, Fu-Hsing N. Rd., Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. 26/F., Ruijin Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1, Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 (c) 2004. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .1.0