© 2003 Fairchild Semiconductor Corporation DS500217 www.fairchildsemi.com
March 1999
Revised May 2003
NC7WZ17 TinyLogi c
UHS Dual Buffer with Schmitt Trigger Inputs
NC7WZ17
TinyLogic UHS Dual Buffer with Schmitt Trigger Inputs
General Description
The NC7WZ17 is a dual buffer with Schmitt trigger inputs
from Fairchild’s Ultra High Speed Series of TinyLogic in
the SC70 6-lead package. The device is fabricated with
advanced CMOS technology to achieve ultra high speed
with high output drive while maintaining low static power
dissipation over a very broad VCC operating range. The
device is spe cified to operate over the 1.6 5V to 5.5V VCC
range. The inputs and outputs are high impedance when
VCC is 0V. Inputs tolerate voltages up to 7V independent of
VCC operating voltage. Schmitt trigger inputs typically
achieve 1V hysteresis between the positive going and neg-
ative going input threshold voltage at 5V VCC.
Features
Space savin g SC70 6-lead pack a ge
Ultra small MicroPak leadless packa ge
Ultra High Speed: tPD 3.6 ns Typ into 50 pF at 5V VCC
High Output Drive: ±24 mA at 3V VCC
Broad VCC Operating Range; 1.65V to 5.5V
Matches the performance of LCX when operated at
3.3V VCC
Power down high impedance inputs/outputs
Overvoltage tolerant inputs facilitate 5V to 3V translation
Patented noise/EMI reduction circuitry implemented
Ordering Code:
Logic Symbol
IEEE/IEC
Pin Descriptions
Function Table
Y = A
H = HIGH Logic Level L = LOW Logic Le v el
Connection Diagrams
Pin Assignment s for SC70
(Top View)
Pin One Orientation Diagram
AAA represents Product Code Top Mark - see ordering code
Note: Orientat ion of Top Mark determi nes Pin One lo cation. Read the Top
Product Code Mark left to right, Pin One is the lower left pin (see diagram).
Pad Assignments for MicroPak
(Top Thru View)
TinyLogic is a regist ered tradem ark of F airc hild Semiconduc t or Corporation.
MicroPak is a trad em ark of Fairchild Sem icond uc t or Corporation.
Order Package Product Code Package Description Supplied As
Number Number Top Mark
NC7WZ17P6X MAA06A Z17 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel
NC7WZ17L6X MAC06A A5 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel
Pin Names Description
A1, A2Data Inputs
Y1, Y2Output
Input Output
AY
LL
HH
www.fairchildsemi.com 2
NC7WZ17
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions (Note 2)
Note 1: Absolute maxi mum rat ings are DC val ues beyo nd which the devi ce
may be d ama ged or hav e it s u sef ul lif e im pai red . Th e data shee t sp ecif ica-
tions should be met, without exception, to ensure that the system design is
reliable over its power supply, temperature, and output/input loading vari-
ables. F airchild does not recomme nd operation ou tside da tasheet specifi-
cations.
Note 2: Unu s ed inputs m ust be he ld H I GH or LOW. They ma y not fl oat.
DC Electrical Characteristi cs
Supply Voltage (VCC)0.5V to +7V
DC Input Voltage (VIN)0.5V to +7V
DC Output Voltage (VOUT)0.5V to +7V
DC Input Diode Current (IIK)
@ VIN < 0.5V 50 mA
DC Output Diode Current (IOK)
@ VOUT < 0.5V 50 mA
DC Output Current (IOUT)±50 mA
DC VCC/GND Current (ICC/IGND)±100 mA
Storage Temperature (TSTG)65°C to +150°C
Junction Temperature under Bias (TJ) 150°C
Junction Lead Temperature (TL)
(Solder ing, 10 seco nds) 260°C
Power Dissipation (PD) @ +85°C 180 mW
Supply Voltage Operating (VCC) 1.65V to 5.5V
Supply Voltage Data Retention (VCC) 1.5V to 5.5V
Input Voltage (VIN)0V to 5.5V
Output Voltage (VOUT) 0V to VCC
Operating Temperature (TA)40°C to +85°C
Thermal Resistance (θJA)350°C/W
Symbol Parameter VCC TA = +25°CT
A = 40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VPPositive Threshold 1.65 0.6 1.0 1.4 0.6 1.11
V
Voltage 1.8 0.7 1.07 1.5 0.7 1.5
2.3 1.0 1.38 1.8 1.0 1.8
3.0 1.3 1.74 2.2 1.3 2.2
4.5 1.9 2.43 3.1 1.9 3.1
5.5 2.2 2.88 3.6 2.2 3.6
VNNegative Threshold 1.65 0.2 0.5 0.8 0.2 0.8
V
Voltage 1.8 0.25 0.56 0.9 0.25 0.9
2.3 0.40 0.75 1.15 0.40 1.15
3.0 0.6 0.98 1.5 0.6 1.5
4.5 1.0 1.42 2.0 1.0 2.0
5.5 1.2 1.68 2.3 1.2 2.3
VHHysteresis Voltage 1.65 0.1 0.48 0.9 0.1 0.9
V
1.8 0.15 0.51 1.0 0.15 1.0
2.3 0.25 0.62 1.1 0.25 1.1
3.0 0.4 0.76 1.2 0.4 1.2
4.5 0.6 1.01 1.5 0.6 1.5
5.5 0.7 1.20 1.7 0.7 1.7
VOH HIGH Level Output 1 .65 1.55 1.65 1.55
VV
IN = VIH
IOH = 100 µA
Voltage 1.8 1.7 1.8 1.7
2.3 2.2 2.3 2.2
3.0 2.9 3.0 2.9
4.5 4.4 4.5 4.4
1.65 1.29 1.52 1.29 IOH = 4 mA
2.3 1.9 2.14 1.9 IOH = 8 mA
3.0 2.4 2.75 2.4 IOH = 16 mA
3.0 2.3 2.62 2.3 IOH = 24 mA
4.5 3.8 4.13 3.8 IOH = 32 mA
3 www.fairchildsemi.com
NC7WZ17
DC Electrical Characteristics (Continued)
AC Electrical Characteristics
Note 3: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output
loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic op erating cu rrent by the ex pressio n:
ICCD = (CPD)(VCC)(fIN) + (ICCstatic).
AC Loading and Waveforms
CL include s l oad and str ay c apacitan ce
Input PRR = 1.0 MHz; t W = 500 ns
FIGURE 1. AC Test Circuit
Input = AC Wav efo r m; tr = tf = 1.8 ns ;
PRR = variable; D ut y Cycle = 50%
FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms
Symbol Parameter VCC TA = +25°CT
A = 40°C to +85°CUnits Conditions
(V) Min Typ Max Min Max
VOL LOW Level Output 1.65 0.0 0.1 0.1
VV
IN = VIL
IOL = 100 µA
Voltage 1.8 0.0 0.1 0.1
2.3 0.0 0.1 0.1
3.0 0.0 0.1 0.1
4.5 0.0 0.1 0.1
1.65 0.08 0.24 0.24 IOL = 4 mA
2.3 0.10 0.3 0.3 IOL = 8 mA
3.0 0.16 0.4 0.4 IOL = 16 mA
3.0 0.24 0.55 0.55 IOL = 24 mA
4.5 0.25 0.55 0.55 IOL = 32 mA
IIN Input Leakage Current 0 to 5.5 ±0.1 ±1.0 µAV
IN = 5.5V, GND
IOFF Power Off Leakage Current 0.0 1 10 µAV
IN or VOUT = 5.5V
ICC Quiescent Supply Current 1.65 to 5.5 1.0 10 µAV
IN = 5.5V, GND
Symbol Parameter VCC TA = +25°CT
A = 40°C to +85°CUnits Conditions Figure
(V) Min Typ Max Min Max Number
tPLH Propagation Delay 1.65 2.0 8.3 14.3 2.0 15.8
ns Figures
1, 3
tPHL 1.8 2.0 6.9 11.9 2.0 13.1 CL = 15 pF,
2.5 ± 0.2 1.5 4.8 8.2 1.5 9.0 RL = 1 M
3.3 ± 0.3 1.0 3.7 5.6 1.0 6.2
5.0 ± 0.5 0.8 3.0 4.7 0.8 5.2
tPLH Propagation Delay 3.3 ± 0.3 1 .5 4.3 6.6 1.5 7.3 ns CL = 50 pF, Figures
1, 3
tPHL 5.0 ± 0.5 1.0 3.6 5 .6 1.0 6.2 RL = 500
CIN Input Capacitance 0 2.5 pF
CPD Power Dissipation 3.3 10 pF (Note 3) Figure 2
Capacitance 5.0 12
www.fairchildsemi.com 4
NC7WZ17
Tape and Reel Specification
TAPE FORMAT for SC70
TAPE DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover T ape
Designator Section Cavities Status Status
Leader (Start End) 125 (typ) Empty Sealed
P6X Carrier 3000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Package Tape Size DIM A DIM B DIM F DIM KoDIM P1 DIM W
SC70-6 8 mm 0.093 0.096 0.138 ± 0.004 0.053 ± 0.004 0.157 0.315 ± 0.004
(2.35) (2.45) (3.5 ± 0.10) (1.35 ± 0.10) (4) (8 ± 0.1)
5 www.fairchildsemi.com
NC7WZ17
Tape and Reel Specification (Continu ed)
TAPE FORMAT for MicroPak
REEL DIMENSIONS inches (millimeters)
Package Tape Number Cavity Cover Tape
Designator Section Cavities Status Status
Leader (S tar t End ) 125 (typ ) E mpt y Sealed
L6X Carrier 5000 Filled Sealed
Trailer (Hub End) 75 (typ) Empty Sealed
Tape
Size ABCDN W1 W2 W3
8 mm 7.0 0.059 0.512 0.795 2.165 0.331 + 0.059/0.000 0.567 W1 + 0.078/0.039
(177.8) (1.50) (13.00) (20.20) (55.00) (8.40 + 1.50/0.00) (14.40) (W1 + 2.00/1.00)
www.fairchildsemi.com 6
NC7WZ17
Physical Dimensions inches (millimeters) unless otherwise noted
6-Lead SC70, EIAJ SC88, 1.25mm Wide
Package Number MAA06A
7 www.fairchildsemi.com
NC7WZ17 TinyLogi c
UHS Dual Buffer with Schmitt Trigger Inputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
6-Lead MicroPak, 1.0mm Wide
Package Number MAC06A
Fairchild does not assume an y responsibility for u se of any circuitry d escribed, no circu it patent licenses are im plied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life suppor t de vices o r syst ems are dev ic es or syste ms
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instruct ions fo r use pr ovi de d in the l abe ling, can be rea-
sonably expected to result in a significant injury to the
user.
2. A crit ical componen t in any com ponen t of a life s uppor t
device or system whose failure to perform can be rea-
sonabl y e xpec ted to cause th e fa i lure of the l ife s upport
device or system, or to affect its safety or effectiveness.
www.fairchildsemi.com