HCPL-817 Phototransistor Optocoupler High Density Mounting Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description Features The HCPL-817 contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Input-output isolation voltage is 5000 Vrms. Response time, tr, is typically 4 s and minimum CTR is 50% at input current of 5 mA. * Current Transfer Ratio (CTR: min. 50% at IF = 5 mA, VCE = 5 V) 1 + * UL approved IC 4 IF COLLECTOR VF CATHODE 3 - 2 Functional Diagram PIN NO. AND INTERNAL CONNECTION DIAGRAM 4 * Response time (tr: typ., 4 s at VCE = 2 V, IC = 2 mA, RL = 100 ) * Compact dual-in-line package Schematic ANODE * High input-output isolation voltage (Viso = 5000 Vrms) 3 EMITTER * CSA approved * IEC/EN/DIN EN 60747-5-2 approved * Options available: - Leads with 0.4" (10.16 mm) spacing (W00) - Leads bends for surface mounting (300) - Tape and reel for SMD (500) - IEC/EN/DIN EN 60747-5-2 approvals (060) Applications * Signal transmission between circuits of different potentials and impedances * I/O interfaces for computers * Feedback circuit in power supply 1 1. ANODE 2. CATHODE 2 3. EMITTER 4. COLLECTOR CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. Ordering Information HCPL-817-xxxx is UL Recognized with 5000 Vrms for 1 minute per UL1577 and is approved under CSA Component Acceptance Notice #5, File CA 88324. RoHS Compliant Option Part number HCPL817 Rank `0' 50% <CTR< 600% Rank `A' 80% <CTR< 160% Rank `B' 130% <CTR< 260% Rank `C' 200% <CTR< 400% Rank `D' 300% <CTR< 600% Rank `L' 50% <CTR< 100% Package -000E -00AE -00BE -00CE -00DE -00LE -300E -30AE -30BE -30CE -30DE -30LE -500E -50AE -50BE -50CE -50DE -50LE Surface Mount Gull Wing 100 pcs per tube X X X X -06AE -06BE -06CE -06DE -06LE -360E -36AE -36BE -36CE -36DE -36LE X X -560E -56AE -56BE -56CE -56DE -56LE X X -W00E -W0AE -W0BE -W0CE -W0DE -W0LE -W6AE -W6BE -W6CE -W6DE -W6LE 100 pcs per tube X 300mil DIP-4 -060E -W60E Tape & Reel IEC/EN/ DIN EN 607475-2 Quantity 400mil DIP-4 X 1000 pcs per reel X 100 pcs per tube X 100 pcs per tube X 1000 pcs per reel 100 pcs per tube X 100 pcs per tube To order, choose a part number from the part number column and combine with the desired option from the option column to form an order entry. Example 1: HCPL-817-360E to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tube packaging with 50%<CTR<600%, IEC/EN/DIN EN 60767-5-2 Safety Approval and RoHS compliant. Example 2: HCPL-817-50BE to order product of 300mil DIP-4 DC Gull Wing Surface Mount package in Tape and Reel packaging with 130%<CTR<260% and RoHS compliant. Option datasheets are available. Contact your Avago sales representative or authorized distributor for information. 2 Package Outline Drawings HCPL-817-000E 7.62 0.3 (0.3) 4.6 0.5 (0.181) 3.5 0.5 (0.138) DATE CODE A 817 LEAD FREE Y WW ANODE 6.5 0.5 (0.256) 0.5 TYP. (0.02) 3.3 0.5 (0.130) 2.8 0.5 (0.110) RANK 0.26 (0.010) 0.5 0.1 (0.02) Dimensions in Millimeters and (Inches) 2.54 0.25 (0.1) 7.62 ~ 9.98 4.6 0.5 (0.181) 7.62 0.3 (0.3) HCPL-817-060E 3.5 0.5 (0.138) DATE CODE LEAD FREE A 817V ANODE Y WW 6.5 0.5 (0.256) 0.5 TYP. (0.02) 3.3 0.5 (0.130) 2.8 0.5 (0.110) RANK 0.26 (0.010) 0.5 0.1 (0.02) Dimensions in Millimeters and (Inches) 2.54 0.25 (0.1) 7.62 ~ 9.98 4.6 0.5 (0.181) 7.62 0.3 (0.3) HCPL-817-W00E 3.5 0.5 (0.138) DATE CODE LEAD FREE ANODE A 817 Y WW 6.5 0.5 (0.256) 6.9 0.5 (0.272) 2.3 0.5 (0.09) 2.8 0.5 (0.110) RANK Dimensions in Millimeters and (Inches) 3 0.5 0.1 (0.02) 2.54 0.25 (0.1) 0.26 (0.010) 10.16 0.5 (0.4) HCPL-817-300E 7.62 0.3 (0.3) 4.6 0.5 (0.181) 3.5 0.5 (0.138) DATE CODE LEAD FREE ANODE A 817 0.26 (0.010) 6.5 0.5 (0.256) Y WW 1.2 0.1 (0.047) 0.35 0.25 (0.014) 10.16 0.3 (0.4) 2.54 0.25 (0.1) RANK 1.0 0.25 (0.039) Dimensions in Millimeters and (Inches) Solder Reflow Temperature Profile 30 seconds 260C (Peak Temperature) Temperature (C) 250C 217C 200C 1. One-time soldering reflow is recommended within the condition of temperature and time profile shown. 150C 2. When using another soldering method such as infrared ray lamp, the temperature may rise partially in the mold of thedevice. Keep the temperature on the package of the device within the condition of (1) above. 60 sec 25C 60 ~ 150 sec 90 sec 60 sec Time (sec) Note: Non-halide flux should be used. Absolute Maximum Ratings (TA = 25C) Storage Temperature, TS -55C to +125C Operating Temperature, TA -30C to +100C Lead Solder Temperature, max. (1.6 mm below seating plane) 260C for 10 s Average Forward Current, IF 50 mA Reverse Input Voltage, VR 6V Input Power Dissipation, PI 70 mW Collector Current, IC 50 mA Collector-Emitter Voltage, VCEO 70 V Emitter-Collector Voltage, VECO 6V Collector Power Dissipation 150 mW Total Power Dissipation 200 mW Isolation Voltage, Viso (AC for 1 minute, R.H. = 40 ~ 60%) 5000 Vrms 4 Electrical Specifications (TA = 25C) Parameter Symbol Min. Typ. Max. Units Test Conditions Forward Voltage VF - 1.2 1.4 V IF = 20 mA Reverse Current IR - - 10 A VR = 4 V Terminal Capacitance Ct - 30 250 pF V = 0, f = 1 KHz Collector Dark Current ICEO - - 100 nA VCE = 20 V Collector-Emitter Breakdown Voltage BVCEO 70 - - V IC = 0.1 mA Emitter-Collector Breakdown Voltage BVECO 6 - - V IE = 10 A Collector Current IC 2.5 - 30 mA *Current Transfer Ratio CTR 50 - 600 % IF = 5 mA, VCE = 5 V, RBE = Collector-Emitter Saturation Voltage VCE(sat) - 0.1 0.2 V IF = 20 mA, IC = 1 mA Response Time (Rise) tr - 4 18 s Response Time (Fall) tf - 3 18 s VCE = 2 V, IC = 2 mA RL = 100 Cut-off Frequency fc - 80 - KHz VCC = 5 V, IC = 2 mA RL = 100 , -3 dB Isolation Resistance Riso 5 x 1010 1 x 1011 - DC 500 V 40 ~ 60% R.H. Floating Capacitance Cf - 0.6 1.0 pF V = 0, f = 1 MHz * CTR = IC x 100% IF PC - COLLECTOR POWER DISSIPATION - mW IF - FORWARD CURRENT - mA 60 50 40 30 20 10 0 -30 0 25 50 75 TA - AMBIENT TEMPERATURE - C 100 125 Figure 1. Forward current vs. temperature. VCE(SAT.) - COLLECTOR-EMITTER SATURATION VOLTAGE - V TA = 25C IC = 0.5 mA IC = 1 mA 4 IC = 3 mA 3 IC = 5 mA IC = 7 mA 2 1 0 0 5 10 IF - FORWARD CURRENT - mA Figure 3. Collector-emitter saturation voltage vs. forward current. 5 150 100 50 0 -30 0 25 50 75 100 TA - AMBIENT TEMPERATURE - C Figure 2. Collector power dissipation vs. temperature. 6 5 200 15 125 TA = 75C TA = 50C TA = 25C 200 100 CTR - CURRENT TRANSFER RATIO - % IF - FORWARD CURRENT - mA 500 TA = 0C TA = -25C 50 20 10 5 2 1 2.0 1.5 1.0 VF - FORWARD VOLTAGE - V 0.5 0 3.0 2.5 Figure 4. Forward current vs. forward voltage. RELATIVE CURRENT TRANSFER RATIO - % IC - COLLECTOR CURRENT - mA TA = 25C PC (MAX.) IF = 30 mA IF = 25 mA 30 IF = 20 mA IF = 15 mA 20 IF = 10 mA 10 0 0 1 IF = 5 mA 2 3 4 5 6 7 VCE - COLLECTOR-EMITTER VOLTAGE - V 8 9 Figure 6. Collector current vs. collector-emitter voltage. 0.14 ICEO - COLLECTOR DARK CURRENT - A VCE(SAT.) - COLLECTOR-EMITTER SATURATION VOLTAGE - V 2 5 10 20 IF - FORWARD CURRENT - mA 50 150 IF = 5 mA VCE = 5 V 100 50 0 -30 0 25 50 75 TA - AMBIENT TEMPERATURE - C 100 10-5 IF = 20 mA IC = 1 mA 0.12 0.10 0.08 0.06 0.04 0.02 0 25 50 75 TA - AMBIENT TEMPERATURE - C Figure 8. Collector-emitter saturation voltage vs. temperature. 6 1 Figure 7. Relative current transfer ratio vs. temperature. 0.16 0 -25 VCE = 5 V TA = 25C Figure 5. Current transfer ratio vs. forward current. 50 40 200 180 160 140 120 100 80 60 40 20 0 100 VCE = 20 V 10-6 10-7 10-8 10-9 10-10 10-11 -25 0 25 50 75 TA - AMBIENT TEMPERATURE - C Figure 9. Collector dark current vs. temperature. 100 200 100 50 20 10 5 2 1 0.5 0.2 0.1 VCE = 2 V IC = 2 mA TA = 25C VCE = 2 V IC = 2 mA TA = 25C 0 VOLTAGE GAIN AV - dB RESPONSE TIME - s 500 tr tf td ts RL = 10 k -10 RL = 1 k RL = 100 -20 0.05 0.1 0.2 0.5 1 2 RL - LOAD RESISTANCE - kW 5 0.5 10 1 2 5 10 20 50 100 f - FREQUENCY - kHz Figure 10. Response time vs. load resistance. Figure 11. Frequency response. Test Circuit for Response Time Test Circuit for Frequency Response VCC VCC RL RD RD INPUT OUTPUT OUTPUT ~ INPUT 10% OUTPUT 90% td ts tr tf For product information and a complete list of distributors, please go to our web site: RL www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright (c) 2005-2009 Avago Technologies. All rights reserved. Obsoletes AV01-0534EN AV02-0265N - November 5, 2009 200 500