4 h | iL Pla 4 Lp ra Oe Jf... _ | certs 4 , mee TE eres er Bmax 2.5 23.5 @ d+0.05 0.5 0.6 Ail dimensions are in mm PRODUCT CODE SYSTEM The part number, comprising 14 digits, is formed as follows: 123 4 5 67 8 9 1011 12 13 14 ele LT LILI Digit! to3 Series code. Digit 4 d.c. rated voltage: D= 68V E=100V | =250V M=400V P=630V Digit 5 Pitch: D = 7.5mm Digit6to9 Digits 7 - 8 - 9 indicate the first three digits of Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table 1) Digit 12 Identifies the dimensions and electrical characteristics. Digit 13 Internal use Digit 14 Capacitance tolerance: J=5%; K=10%; M=20% Table 1 (for more detailed information, please refer to page 15). Standard Lead Taping Ordering packaging style length style code (mm) Figure No. | (Digit 10 to 11) AMMO-PACK 1 DQ AMMO-PACK 2 28 REEL 355mm 1 CK Loose, short leads 4r2 AA Loose, longleads | 17+1/2 Z3 Note: Ammo-pack is the preferred packaging for taped version. 33 R66 MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE Typical applications: this series combines small size, good performances in by-passing, blocking and interference suppression in low voltage applications (i.e.: AUTOMOTIVE). PRODUCT CODE: R66 p-7.5mm Note: R66 series has replaced the R84 series (available only upon request). For new design we suggest the use of the R66 series. Construction: STACKED and WOUND technology GENERAL TECHNICAL DATA Dielectric: polyester film (polyethylene terephthalate). Plates: aluminium layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 VO. Marking: Manufacturer's logo, capacitance, tolerance, D.C. rated voltage. Climatic category: 55/100/56 IEC 60068-1 Operating temperature range: -55 to +105C For stacked technology an upper operating temperature of +125C is allowed for a max operating time of 1000h. Related documents: IEC 60384-2 Winding scheme ~ single sided metallized polyester film 02/2003ARCOTRONICS STACKED VERSION R66 MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p=7.5mm PRODUCT CODE: R66 Mechanical version and packaging (Table 1) Internal use Tolerance: J (45%); K ( All dimensions are in mm. Note: + 10%); M (+ 20%) on 6aVde/40Vac aviet Max Ko Part Number cae 400Vde/200Vac dviat maxo Part Number BlH IL [p | (vms) | (Vvus) " |B] HL | p | (us) | (vus) 0.33uF | 2.5] 7.0 |10.0 | 7.5] 120 15E3 |} R66DD3330--6-- 6800pF | 2.5] 7.0/10.0 | 7.5) 275 | 220E3 | R66MD1680--6-- 0.47uF | 3.0] 8.0]/10.0] 7.5] 120 | 15E3 | R66DD3470--6-- 0.010uF | 2.5] 7.0/10.0 | 7.5 | 275 | 220E3 | R66MD2100--6-- 0.68uF | 35] 85 ]10.5 | 7.5] 120 153 | R66DD3680--6-- O.015uF } 25] 7.0)/10.0 | 7.5 | 275 | 220E3 | R66MD2150--6-- 1.0uF | 4.0] 90/105 | 7.5] 120 153 |ReE6DD4100--6-- 0.022uF | 3.0 8.0/10.0 | 7.5} 275 | 220E3 | R66MD2220--6-- 1.5uF | 5.0] 11.0]10.5 | 7.5] 120 153 |R660D4150--6-- 0.033uF | 3.5 8.5410.5 | 7.5] 275 220 E3 | R66MD2330--6-- 2.2uF | 6.0] 120 ]10.5 | 7.5] 120 15E3 | RE6DD4220--6-- 0.047nF | 4.0 9.0}10.5 | 75] 275 220 E3 | R66MD2470--6-- o.10uF | 6.0] 12.0]105]7.5| 275 | 2203 | Re6MD3100--6-- Max] Maxk o.15uF | 6.0] 120/105]75]| 275 | 2203 | Re6MD3150--6-- Rated , yoevaeovec ast va _ Pert Number us uw 0.068uF |} 25] 7.0 |100]75] 150 | 3063 | ResED2680--6-- San 630Vde/220Vact dvi max Ko Part Number o.iouF | 25] 7.0|10.0]75| 150 | 3063 | ResED3100--6-- BiH | L |p | (us) | (vaus) o.1suF | 25] 7.0]10.0]7.5] 150 | 303 |Re6ED3150--6-- 1000pF | 2.5] 7.0/10.0 | 7.5} 300 | 378E3 o.22uF |}25| 7.0|100])75| 150 | 3063 | R6EsED 3220--6-- 1500pF | 2.5 | 7.0] 10.0 | 7.5 | 300 | 378E3 o33uF |} 35] 85 ]105]|75| 150 | 3063 | Re6ED3330--6-- 2200pF | 2.5} 7.01100 | 7.5} 300 | 378 ES o47uF |} 35} 85 |105|7.5| 150 | 3063 | ResED3470--6-- $300pF | 2.5 | 7.0)/10.0 | 7.5) 300 | 378 E3 o.68uF | 4.0] 9.0]105]7.5] 180 | 3063 | Re6ED 3680--6-- 4700pF | 2.5) 7.0)10.0 | 7.5 | 300 | 378 E3 1.0uF | 5.0] 11.0 }105|7.5| 150 | 303 |Re6ED4100--6-- 6800pF | 3.0} 8.0)/10.0 | 7.5) 300 | 378E3 isur }6.0| 1201105|75| 150 | 3063 | Recep 4150--6-- o.o1or}35] 85]105] 7.5] 300 | 3783 | Re6PD2100--6-- 0.015nF | 4.0) 9.0/105|75| 300 | 3783 | ResPD2150--6-- Max Max o.o22uF | 5.0] 11.0]105]| 7.5} 300 | 378&3 | Re6PD2220--6-- ee 250Vde/160Vac dv/dt e Part Number 0.033uF | 6.0] 12.0/10.5 | 7.5} 300 | 37863 | Re6PD 2330--6-- B | H L [ p | (Vis) | (V?/us) 0.047uF | 6.0| 12.0110.5 | 7.5] 300 | 378E3 | RE6PD2470--6-- 0.022uF | 25] 7.0|10.0] 7.5] 200 | 1003 |ResID 2220--6-- Tt 0.033ue | 25] 7.0|100] 7.5} 200 | 10063 | ResID 2330--6-- Mechanical version and packaging (Table 1) 0.047uF |} 25] 7.0|100] 7.5] 200 | 100E3 | Re6ID 2470--6-- nema Use . 0.068uF | 3.0] 8.0|10.0| 7.5] 200 | 10063 | ResID 2680--6-- Tolerance: J (5%); K (+ 10%), M (+ 20%) OO o1oF 135] 851105] 7.5} 200 | 100E3 | ResID 3100--6-- o.15uF | 4.0] 0]105| 7.5] 200 | 1003 | ResID 3150--6-- 0.22uF | 5.0] 11.0|10.5|7.5| 200 | 1003 | ResID 3220--6-- 0.33KF | 6.0} 120]105| 7.5} 200 | 100E3 | RESID 3330--6-- If the working voltage (V) is lower than the rated voltage (Va), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vp /V. The pulse characteristic Kg depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 109). 02/2003R66 MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p=7.5mm PRODUCT CODE: R66 WOUND VERSION Max Max | Max Ky Cop 63Vdc/40Vac dv/dt Max Ko Part Number cae 400Vde/200Vac dv/dt Part Number Bl H IL | p | (Vis) | (Vs) " }B | AH YT lL | p | (ms) | Ws) 0.10uF |} 25] 70]100]}75] |063E3 | RE6DD3100--0-- 3300pF | 2.5] 7.0]100]7.5| 30 | 24E3 |Re6MD1330--0-- 0.15uF | 25] 7.0]/100/75] 5 0.63 E3 | R66DD3150--0-- A700pF | 2.5 | 7.0/100) 7.5} 30 24E3 | R66MD1470--0-- 022uF |35| 85 f105 175] 5 0.63 E3 | R66DD3220--0-- 6800pF 7 2.5) 7.0/10.0) 7.5] 30 24E3 | R66MD1680--0-- 0.330F | 35] 85/105)75] 5 0.63 E3 | R66DD3330--0-- 0.010uF | 2.5] 7.0/10.0) 7.5} 30 24E3 | R66MD2100--0-- O47uF [4.0]; 90/105} 751 5 0.63 E3 | R66DD3470--0-- O.015HF |} 35] 85/105 175] 30 | 24E3 | R68MD2150--0-- 0.68pF } 5.0] 110/105}7.5| 5 |0.63E3 | ResDD3680--0-- 0.022uF | 3.5] 85/105 | 7.5) 30 | 24E3 |R66MD2220--0-- 1.0uF | 6.0 | 12.0 | 10.5 | 7.5 5 0.63 E3 | R66DD 4100--0-- 0.033uF | 4.0 9.0] 10.5 | 7.5 30 24E3 | R66MD2330--0-- 0.047yF | 5.0| 11.0/105]75] 30 | 24&3 |ReemD2470--0-- Max [Max Ky 0.068uF | 5.0] 11.0/105175] 30 | 243 | ReemD2680--0-- t 100Vdc/63Vac pong dvidt Part Number 0.10nF | 6.0} 120/105 }7.5| 30 | 2463 | Re6MD3100--0-- BIH L Pp |(V/us) | (V4%ps) 0.047uF | 251 7.0]/100]75] 6 1.2E3 | REGED 2470--0-- Max] Max Kp oo6sue |} 251 70 }100}75| 6 | 1263 |Re6ED 2680--0-- ence 630Vde/220Vac dv/dt Part Number O.10uF | 3.5] 854105175] 6 | 1.263 | RE6ED3100--0-- B {| H | L | p | (Vis) | (Vis) otsue | 35] as}ios!75!| 6 | 1263 |ResED3150--0-- 1000pF | 2.5] 7.0/10.0]7.5} 40 | 50E3 | ResPD1100--0-- o22uF | 35} 851105175| 6 | 1.23 | REGED 3220--0-- 1500pF | 25} 7.0/10.0 | 7.5) 40 | 50E3 | RE6PD 1150--0-- 0.33uF | 5.0] 11.0]105175] 6 | 1.263 |Re6ED3330--0-- 2200pF | 25) 7.0/10.0 1) 7.5) 40 | SOE3 | R6EPD 1220--0-- 047uF } 6.0} 120}105]7.5| 6 | 1.23 | Re6ED3470--0-- S300pF ) 3.5} 85)]10.5 | 75) 40 | SOES | REE6PD 1330--0-- 4700pF | 3.5] 85/105}7.5| 40 | 50E3 | Re6PD1470--0-- Max Max Ko 6800pF | 3.5] 85/105]7.5| 40 | 50E3 | REEPD 1680--0-- ee 250Vde/160Vac dvidt Part Number o.010uE | 4.0] 9.0]105]7.5] 40 | 5063 |Re6PD2100--0-- |B | H L | p | (Wus) | (vius) 0.015uF | 5.0] 1101105175] 40 50E3 | R66PD 2150--0-- O.015uF | 25) 7.0 /10.0 | 7.5 15 7.5E3 |R66ID 2150--0-- 0.022uF | 6.0] 12.0]10.5 | 7.5 40 50E3 | R66PD 2220--0-- 0.022uF | 2.5| 7.0/100]7.5| 15 | 7.5E3 |RE6ID 2220--0-- 7 0.033uF }2.5| 7.0]100] 7.5] 15 | 7.563 |Re6ID 2330--0-- Mechanical version and packaging (Table 1) TT | nternal use Bi 0.047uF | 3.5] 85 1105]7.5| 15 | 7.53 | Re6ID 2470--0-- ' Tolerance: J (+5%); +10%); M(+20% _ oo 0.068uF | 3.5] 85/105]7.5} 15 | 7.563 |Re6ID 2680--0-- erance: J (5%); K (+ 10%); M ( ) 0.10uF | 4.0] 9.0|10517.5] 15 | 7.5E3 |ResID 3100--0-- 0.15uF | 5.0] 11.0]105]75] 15 | 7.563 |ResID 3150--0-- 0.22uF | 6.0] 120/105]75] 15 | 7.5E3 |ResID 3220--0-- Mechanical version and packaging (Table 1) | |; Internal use . | Tolerance: J (+5%); K(+10%); M(+20%) _ All dimensions are in mm. Note: If the working voltage (V) is lower than the rated voltage (Vp), the capacitor may work at higher dv/dt. In this case the maximum value allowed is obtained multiplying the above value (see table dv/dt) with the ratio Vp /V. The pulse characteristic Kg depends on the voltage wave-form and in any case it cannot overcome the value given in the above table. * Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 109). 35 02/2003-ARCOTRONICS ELECTRICAL CHARACTERISTICS Rated voltage (Vp): 63 Vde - 100 Vde - 250 Vde 400 Vdc - 630 Vdc Rated temperature (Tp): +85C Temperature derated voltage: for temperatures between +85C and the upper operating temperature (+105C for wound technology and +125C for stacked technology) a decreasing factor of 1.25% per degree C on the rated voltage Vp has to be applied. Capacitance range: 1OO00pF to 3.3nF Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): +5% (J); + 10% (K); + 20% (M). Total self-inductance (L): ~8nH (lead length ~2mm) Dissipation factor (DF): tgS x 104 at +25C 45C kHz tgs x 104 1 =100 10 = 150 Insulation resistance: Test conditions Temperature: +25C+5C Voltage charge time: 1 min Voltage charge: 50 Vdc forV_ <100 Vde 100 Vdc forV_ 2100 Vde Performance For V_ < 100 Vdc = 3750 MQ for = 1250s _ for For V_ > 100 Vde = 30000MQ (50000 M22)* *Typical value Test voltage between terminals: 1.6 Vp applied for 2 s at +25C+5C C <0.33yF (5000 MQ)* C >0.33uF (5000 s)* 36 R66 MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p=7.mm PRODUCT CODE: R66 TEST METHOD AND PERFORMANCE Damp heat, steady state: Test conditions Temperature: +40C+2C Relative humidity (RH): 93% +2% Test duration: 56 days Performance Capacitance change IAC/Cl: <5% DF change (Atg8): Insulation resistance: <50 x 10% at 1kHz = 50% of initial limit. Endurance: Test conditions Temperature: +100C +2C Test duration: 2000 h Voltage applied: 1.25xVe Performance Capacitance change IAC/CI: <5% DF change (Atg8): Insulation resistance: =50 x 10-4 at 10kHz = 50% of initial limit. Resistance to soldering heat: Test conditions Solder bath temperature: +260C 45C Dipping time (with heat screen):10s+1s Performance Capacitance change IAC/CI: <2% DF change (Atgd): = 50 x 10-4 at 10kHz Insulation resistance: = initial limit. Long term stability (after two years): Storage standard environmental conditions (see page 11). Performance Capacitance change IAC/Cl: <3% for C<0.1uF =2% for C>0.1uF RELIABILITY Reference MIL HDB 217 Application conditions: Temperature: +40C+2C Voltage: 0.5xVp Failure rate: <2 FIT (1 FIT = 1 x 109 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change !AC/Cl: >10% DF change (Atg9): >2 x initial limit. Insulation resistance: <0.005 x initial limit. 02/2003ARCOTRONICS oe R66 MKT Series METALLIZED POLYESTER FILM CAPACITOR MINIATURE TYPE p=7.5mm PRODUCT CODE: R66 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th < 40C) vie 63Vde/40Vac vn [V] 100 Vdc / 63 ' Vac _ ; eA Pe pes pe ee rs ee a [| Ope 10 | bad 0.22uF i pote | 0.47pF -p=7.5 i I} : hoy 4 ae { i | i bt | | ! py Hp eo i I. i Poy | i i | i ; | 1 { 7 i L i io _ . Vrms [V] 250 Vde f 1 60 Vac ' Vrms [V] 400 Vdc / 200 Vac Se = py ae Oe ee -! ; Teh [Pe Say fee ell done fee cee i jon mm i Stade : || Poooere 54> ct 0.022uF -p=7.5 4; Ti] 0.047uF -p=7.5 |! O4F-p=7.5% ; BE) pe oo | 0.018 pF - . + |. 0.047pF - i O.TPF - (2) O.22uF - Vrms [V] 630 Vdc / 220 Vac 1000 +--> EEE TIO? = [ee ee Co | mofo Pepe | 1007 tp poset pede | thoes | |: Pp 10 - Note: p (pitch) in mm. 37 02/2003