R Slim Rectangular Inductive Prox TL-T Miniature, Slim-styled Type Proximity H Space-saving prox ideal for timing cam and dog detection H Four mounting holes provided: two from the side and two from the rear of the housing H Ganged mounting possible for multiple pulse generation H Alternate frequency models available to avoid mutual interference Ordering Information Part number Type Sensing Distance DC 3-wire switching type NPN-NO NPN-NC PNP-NO PNP-NC AC switching type SCR-NO SCR-NC Shielded 2 mm (0.08 in) TL-T2E1 TL-T2E2 TL-T2F1 TL-T2F2 TL-T2Y1 TL-T2Y2 Unshielded 5 mm (0.20 in) TL-T5ME1 TL-T5ME2 TL-T5MF1 TL-T5MF2 TL-T5MY1 TL-T5MY2 Note: 1. To avoid mutual interference, this sensor can be ordered with a different oscillating frequency. Add a "5" to the end of the part number (e.g. TL-N2E15). 2. Add suffix "G" to the model number when placing your order for European models with color-coded cables conforming to CENELEC standard (EN50044). Refer to the color code table in the "Output Stage Circuit Diagram" for the cable color codes of the European models. TL-T TL-T Specifications J RATINGS/CHARACTERISTICS Part number TL-T2E1, TL-T2E2, TL-T2Y1, TL-T2Y2 TL-T2F1, TL-T2F2 Supply voltage (operating voltage range) E and F models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 20% max. Y models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz Current consumption E and F models: Leakage current Y models: Sensing object Magnetic metal (The sensing distance decreases with non-magnetic metal.) Sensing distance 2 mm 10% (0.08 10%) 5 mm 10% (0.19 10%) Sensing distance (standard object) 0 to 1.6 mm (iron, 12 x 12 x 1 mm) 0 to 0.06 in (iron 0.47, 47 x 0.04 in) 0 to 4 mm (iron, 15 x 15 x 1 mm) 0 to 0.157 in (iron 0.59 x 0.59 x 0.39 in) Differential travel 10% max. of sensing distance Response frequency E and F models: Y models: Operating status (with sensing object approaching) E1 models: E2 models: F1 models: Y1 models: Y2 models: Control output Type E1: E2: F1: F2: Switching capacity E and F models: Y models: 100 mA max. at 12 VDC and 200 mA max. at 24 VDC 10 to 200 mA E and F models: Y models: Reverse connection protection and surge absorber Surge absorber Circuit protection Indicator TL-T5ME1, TL-T5ME2, TL-T5MF1, TL-T5MF2 TL-T5MY1, TL-T5MY2 15 mA max. at 24 VDC 2.5 mA max. at 200 VAC 800 Hz, 20 Hz E and F models: Y models: 250 Hz, 20 Hz L output signal with load ON H output signal with load OFF H output signal with load ON Load ON Load OFF NPN-NO Y1: SCR-NO NPN-NC Y2: SCR-NC PNP-NO PNP-NC Operation indicator (red LED) Ambient temperature Operating -- 25C to 70C (-- 13F to 158F) with no icing Ambient humidity Operating 35% to 95% Temperature influence 10% max. of sensing distance at 23C (73.4F) in the temperature range of -- 25C to 70C (-- 13F to 158F) Voltage influence E and F models: 2.5% max. of sensing distance within a range of 15% of the rated power supply voltage Y models: 2.5% max. of sensing distance within a range of 10% of the rated power supply voltage Residual voltage E and F models: Y models: Insulation resistance 50 M min. (at 500 VDC) between case and current carry parts Dielectric strength DC switching models: parts AC switching models: parts 1.0 V max. with a load current of 100 mA and a cord length of 2 m Refer to Residual Load Voltage (Typical) on page 4. 1,000 VAC, 50/60 Hz for 1 min between case and current carry 2,000 VAC, 50/60 Hz for 1 min between case and current carry Vibration resistance 10 to 55 Hz, 1.5-mm (0.06 in)double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 500 m/s2 (1640 ft/s2) approx. 50G for 10 times each in X, Y, and Z directions Enclosure rating IEC IP67 Weight (with 2-m cord) Material 2 Approx. 70 g (2.47 oz) Case Heat-resistant ABS resin Sensing surface Heat-resistant ABS resin TL- T TL-T Operation J OUTPUT CIRCUITS E Models F Models NPN (DC 3-wire) PNP (DC 3-wire) Brown Brown Black (See Note 1.) Load Black (See Note 1.) Main circuit Main circuit Output (See Note 2.) Output (See Note 2.) Load Blue Blue Note: 1. 200 mA max. (load current) 2. When a transistor is connected Note: 1. 200 mA max. (load current) 2. When a transistor is connected Y Models (AC 2-wire) Load Brown Main circuit Blue J TIMING CHARTS E Models F Models NPN (DC 3-wire) PNP (DC 3-wire) Yes Target object No Load (between brown and black leads) Operates Releases Output voltage (between black and blue leads) Operation indicator Target object H L ON OFF Load (between blue and black leads) Yes No Operates Releases ON Operation indicator OFF Y Models (DC 2-wire) Yes Target object Load No Operates Releases Operation indicator ON OFF 3 TL-T TL-T Engineering Data J OPERATING RANGE (TYPICAL) J SENSING OBJECT SIZE AND MATERIAL VS. SENSING DISTANCE (TYPICAL) TL-T5M Steel TL-T2 standard object: Iron with 12 x 12 x t1 in size) Stainless steel (SUS304) Brass Steel Sensing distance X (mm) TL-T5M standard object: Iron with 15 x 15 x t1 in size) Sensing distance X (mm) Sensing distance X (mm) TL-T2 Stainless steel (SUS304) Brass Aluminum Aluminum Sensing head Side length of sensing object: d (mm) Side length of sensing object: d (mm) J LEAKAGE CURRENT (TYPICAL) J RESIDUAL LOAD VOLTAGE (TYPICAL) TL-TjY (at constant 100 VAC) 100 VAC Load current (mA) Load voltage VL (V) Load voltage VL (V) Leakage current (mA) AC power supply Supply voltage (V) 4 (at constant 200 VAC) 200 VAC Load current (mA) TL- T TL-T Dimensions Unit: mm (inch) Sensing surface Two, M3, depth 6 Two, 3.1 dia. (0.122) 6 (0.24) 16| 0.2 (0.0.63|0.008 ) 40 (1.57) 9 (0.35) 32| 0.2 (1.259|0.008 ) 4 5 (0.19) 17|0.2 4 (0.787|0.008 ) 26 (1.02) Indicator 12 (0.47) DC switching model: Three, 0.2-mm (0.007 in) conductors AC switching model: Two, 0.3-mm (0.012 in) conductors Oil- and vibration-resistant, vinyl-insulated round cord, 4 external dia.; standard length: 2 m (6.56 ft) Precautions J CONNECTION TO THE LOAD J MOUNTING Be sure to connect the Proximity Sensor to the power source through a load. Direct connection of the Sensor may damage the Sensor. At the time of rear mounting, be sure that the tightening torque does not exceed 6 kgf S cm (0.59 N S m) 5.22 in S lbf. Mounting screws, each tightened to torque 6 kgf S cm (0.59 N S m) max. Load 90 to 250 VAC At the time of side mounting, be sure that the tightening torque does not exceed 8 kgf S cm (0.78 N S m) 2.02 in S lbf. Mounting screws, each tightened to torque 8 kgf S cm (0.78 N S m) max. 5 TL-T TL-T J EFFECT OF SURROUNDING METALS J MUTUAL INTERFERENCE If the TL-T5M is embedded in metal, keep at least the following distances between the TL-T and the metal. When two or more TL-T sensors are mounted face-to-face or sideby-side, separate them as shown below. The table below indicates the minimum distances A and B. 12 mm (0.47) A B 15 mm (0.59) 25 mm (0.98) 15 mm 15 mm 15 mm (0.59) 15 mm (0.59) Distance A B TL-T5jj 120 mm (4.72 in) 80 mm (3.15 in) TL-T5jj5 60 mm (2.36 in) 40 mm (1.57 in) TL-T2jj 40 mm (1.57 in) 12 mm (0.47 in) TL-T2jj5 10 mm (0.39 in) 0 mm Note: Figures in parentheses will apply if the Sensors in use are different from each other in response frequency. If the TL-T2 is embedded in metal, the TL-T2 will not be influenced by metal. NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. R OMRON ELECTRONICS LLC OMRON ON-- LINE OMRON CANADA, INC. 1-800-55-OMRON Global -- http://www.omron.com USA -- http://www.omron.com/oei Canada -- http://www.omron.com/oci 416-286-6465 One East Commerce Drive Schaumburg, IL 60173 Cat. No. CEDSAX4 11/01 885 Milner Avenue Scarborough, Ontario M1B 5V8 Specifications subject to change without notice. Printed in U.S.A .