R
Slim Rectangular Inductive Prox TL-T
Miniature, Slim-styled Type Proximity
HSpace-saving prox ideal for timing cam
and dog detection
HFour mounting holes provided: two from
the side and two from the rear of the
housing
HGanged mounting possible for multiple
pulse generation
HAlternate frequency models available to
avoid mutual interference
Orderin
g
Information
Part number
Type Sensing DC 3-wire switching type AC switching type
T
y
p
e
S
e
n
s
i
n
g
Distance NPN-NO NPN-NC PNP-NO PNP-NC SCR-NO SCR-NC
Shielded 2 mm (0.08 in) TL-T2E1 TL-T2E2 TL-T2F1 TL-T2F2 TL-T2Y1 TL-T2Y2
Unshielded 5 mm (0.20 in) TL-T5ME1 TL-T5ME2 TL-T5MF1 TL-T5MF2 TL-T5MY1 TL-T5MY2
Note: 1. To avoid mutual interference, this sensor can be ordered with a different oscillating frequency. Add a 5” to the end of the part
number (e.g. TL-N2E15).
2. Add suffix “G to the model number when placing your order for European models with color-coded cables conforming to
CENELEC standard (EN50044). Refer to the color code table in the “Output Stage Circuit Diagram for the cable color codes
of the European models.
TL-TTL-T
2
Specifications
JRATINGS/CHARACTERISTICS
Part number TL-T2E1, TL-T2E2,
TL-T2F1, TL-T2F2
TL-T2Y1, TL-T2Y2 TL-T5ME1, TL-T5ME2,
TL-T5MF1, TL-T5MF2
TL-T5MY1, TL-T5MY2
Supply voltage (operating voltage range) E and F models: 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 20% max.
Y models: 100 to 220 VAC (90 to 250 VAC), 50/60 Hz
Current consumption E and F models: 15 mA max. at 24 VDC
Leakage current Y models: 2.5 mA max. at 200 VAC
Sensing object Magnetic metal (The sensing distance decreases with non-magnetic metal.)
Sensing distance 2mm±10% (0.08 ±10%) 5mm±10% (0.19 ±10%)
Sensing distance (standard object) 0 to 1.6 mm (iron, 12 x 12 x 1 mm)
0 to 0.06 in (iron 0.47, 47 x 0.04 in)
0to4mm(iron,15x15x1mm)
0to0.157in(iron0.59x0.59x0.39in)
Differential travel 10% max. of sensing distance
Response frequency E and F models: 800 Hz,
Y models: 20 Hz
E and F models: 250 Hz,
Y models: 20 Hz
Operating status (with sensing object
approaching)
E1 models: L output signal with load ON
E2 models: H output signal with load OFF
F1 models: H output signal with load ON
Y1 models: Load ON
Y2 models: Load OFF
Control output Type E1: NPN-NO Y1: SCR-NO
E2: NPN-NC Y2: SCR-NC
F1: PNP-NO
F2: PNP-NC
Switching
capacity
E and F models: 100 mA max. at 12 VDC and 200 mA max. at 24 VDC
Y models: 10 to 200 mA
Circuit protection E and F models: Reverse connection protection and surge absorber
Y models: Surge absorber
Indicator Operation indicator (red LED)
Ambient temperature Operating -- 2 5 °Cto70°C(--13°F to 158°F)withnoicing
Ambient humidity Operating 35% to 95%
Temperature influence ±10% max. of sensing distance at 23°C (73.4°F) in the temperature range of
-- 2 5 °Cto70°C(--13°F to 158°F)
Voltage influence E and F models: ±2.5% max. of sensing distance within a range of ±15% of the rated power
supply voltage
Y models: ±2.5% max. of sensing distance within a range of ±10% of the rated power supply
voltage
Residual voltage E and F models: 1.0 V max. with a load current of 100 mA and a cord length of 2 m
Y models: Refer to Residual Load Voltage (Typical) on page 4.
Insulation resistance 50 Mmin. (at 500 VDC) between case and current carry parts
Dielectric strength DC switching models: 1,000 VAC, 50/60 Hz for 1 min between case and current carry
parts
AC switching models: 2,000 VAC, 50/60 Hz for 1 min between case and current carry
parts
Vibration resistance 10 to 55 Hz, 1.5-mm (0.06 in)double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 500 m/s2(1640 ft/s2) approx. 50G for 10 times each in X, Y, and Z directions
Enclosure rating IEC IP67
Weight (with 2-m cord) Approx. 70 g (2.47 oz)
Material Case Heat-resistant ABS resin
M
a
t
e
r
i
a
l
Sensing
surface
Heat-resistant ABS resin
TL-T TL- T
3
O
p
eration
JOUTPUT CIRCUITS
Main
circuit
Load
Brown
Black
(See Note 1.)
Blue
Main
circuit
Load
Brown
Blue
Note: 1. 200 mA max. (load current)
2. When a transistor is connected
Note: 1. 200 mA max. (load current)
2. When a transistor is connected
NPN (DC 3-wire)
E Models F Models
PNP (DC 3-wire)
Black
(See Note 1.)
Output
(See
Note 2.)
Output
(See
Note 2.)
Main
circuit
Brown
Blue
Y Models
Load
(AC 2 -wire)
JTIMING CHARTS
E Models F Models
Yes
No
Operates
Releases
ON
OFF
H
L
Target object
Operation indicator
Output voltage (between black
and blue leads)
Load (between brown and
black leads)
Yes
No
Operates
Releases
ON
OFF
Target object
Operation indicator
Load (between blue and
black leads)
NPN (DC 3-wire) PNP (DC 3-wire)
Y Models
Target
object
Operation
indicator
Load
Yes
No
Operates
Releases
ON
OFF
(DC 2 -wire)
TL-TTL-T
4
En
g
ineerin
g
Data
TL-T5M
TL-T5M standard object:
Ironwith15x15xt1in
size)
TL-T2 standar d object:
Ironwith12x12xt1in
size)
Sensing head
Sensing distance X (mm)
Sensing distance X (mm)
Steel
Stainless steel
(SUS304)
Brass
Aluminum
Side length of sensing object: d (mm)
Steel
Stainless steel (SUS304)
Brass
Aluminum
Side length of sensing object: d (mm)
JOPERATING RANGE
(TYPICAL)
JSENSING OBJECT SIZE AND MATERIAL VS. SENSING
DISTANCE (TYPICAL)
Sensing distance X (mm)
TL-T2
(at constant 200 VAC)
Load voltage V (V)
L
Load current
mA
Load voltage V (V)
L
Load current
mA
AC
power
supply
Su
l
volta
e
V
JLEAKAGE CURRENT
(TYPICAL)
JRESIDUAL LOAD VOLTAGE (TYPICAL)
Leakage current (mA)
100 VAC
200 VAC
TL-TjY(at constant 100 VAC)
TL-T TL- T
5
Dimensions
Unit: mm (inch)
Sensing
surface
Indicator
Two, 3.1 dia. (0.122)
Tw o , M3 ,
depth 6
DC switching model: Three, 0.2-mm (0.007 in) conductors
AC switching model: Two, 0.3-mm (0.012 in) conductors
Oil- and vibration-resistant, vinyl-insulated round cord,
4 external dia.; standard length: 2 m (6.56 ft)
6 (0.24)
40
(1.57)
4
26
(1.02)
4
5 (0.19)
9 (0.35)
12
(0.47)
17¦0.2
(0.787¦0.008)
16¦0.2
(0.0.63¦0.008)
32¦0.2
(1.259¦0.008)
Precautions
JCONNECTION TO THE LOAD
Be sure to connect the Proximity Sensor to the power source
through a load. Direct connection of the Sensor may damage the
Sensor.
Load
90 to 250 VAC
JMOUNTING
At the time of rear mounting, be sure that the tightening torque
does not exceed 6 kgf Scm (0.59 N Sm) 5.22 in Slbf.
Mounting screws, each tight-
ened to torque 6 kgf Scm
(0.59 N Sm) max.
At the time of side mounting, be sure that the tightening torque
does not exceed 8 kgf Scm (0.78 N Sm) 2.02 in Slbf.
Mounting screws, each tight-
ened to torque 8 kgf Scm
(0.78 N Sm) max.
TL-TTL-T
JEFFECT OF SURROUNDING METALS
If the TL-T5M is embedded in metal, keep at least the following
distances between the TL-T and the metal.
If the TL-T2 is embedded in
metal, the TL-T2 will not be
influenced by metal.
15 mm (0.59)
25 mm (0.98)
12 mm
(0.47)
15 mm 15 mm
15 mm (0.59)
15 mm (0.59)
JMUTUAL INTERFERENCE
When two or more TL-T sensors are mounted face-to-face or side-
by-side, separate them as shown below. The table below indicates
the minimum distances A and B.
AB
Distance A B
TL-T5jj 120 mm (4.72 in) 80 mm (3.15 in)
TL-T5jj560 mm (2.36 in) 40 mm (1.57 in)
TL-T2jj 40 mm (1.57 in) 12 mm (0.47 in)
TL-T2jj510 mm (0.39 in) 0mm
Note: Figures in parentheses will apply if the Sensors in use are
different from each other in response frequency.
Cat. No. CEDSAX4 11/01 Specifications subject to change without notice. Printed in U.S.A
.
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
1-800-55-OMRON
OMRON CANADA, INC.
885 Milner Avenue
Scarborough, Ontario M1B 5V8
416-286-6465
R
OMRON ON--LINE
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci