400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA 400W Surface Mount Transient Voltage Suppressor SMA Features z z z z z z Breakdown voltage from 6.8 to 250 volts Low inductance, excellent clamping capability Repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR For unidirectional types Typical IR less than 1 A above 10V z High temperature soldering guaranteed:250C/10 seconds at terminals z This series is UL recognized under component index. File number E315008 z RoHS Compliant Mechanical Data JEDEC DO-214AC (SMA) molded plastic over glass passivated junction Case: Meets UL 94V-0 flammability rating Epoxy: Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Color band denoted positive end (cathode) Polarity: Mounting position: Any 0.002 ounces, 0.061 gram Weight: Maximum Ratings (T Ambient=25C unless noted otherwise) Symbol Description PPPM Peak Pulse Power Dissipation on 10/1000s Waveform IPPM Peak Pulse current on 10/1000s Waveform IFSM Peak Forward Surge Current Operating Junction and Storage TJ,TSTG Temperature Range Value Unit Minimum 400 W See Table A 40 A -55 to 150 C Conditions Non-repetitive current pulse, per FIG.3 and derated above TA=25 C per FIG.2 8.3ms single half sine-wave superimposed on rated load, (JEDEC Method) (Note 1,2) Note: 1. Mounted on 5.0mm x 5.0mm (0.03mm thick) copper pads to each terminal 2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum. TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-824-8766 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. D/AH 2008-02-25 Page 1 of 6 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Part NO. Device Marking Code Reverse Standoff Voltage Breakdown Voltage @ Test Current. V BR V WM IT(mA) Max. Reverse Leakage Current @ V WM Max. Clamping Voltage @ IPPM Max. Peak Pulse Current VC (V) IPPM (A) ID (A) 10.5 39 1000/2000 11.3 36.3 500/1000 12.1 33.9 200/400 Uni-Polar Bi-Polar Uni Bi (V) Min. Max. P4SMA6.8A P4SMA6.8CA 6V8A 6V8C 5.8 6.45 7.14 P4SMA7.5A P4SMA7.5CA 7V5A 7V5C 6.4 7.13 7.88 P4SMA8.2A P4SMA8.2CA 8V2A 8V2C 7.02 7.79 8.61 P4SMA9.1A P4SMA9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 30.6 50/100 P4SMA10A P4SMA10CA 10A 10C 8.55 9.5 10.5 1 14.5 28.3 10/20 P4SMA11A P4SMA11CA 11A 11C 9.4 10.5 11.6 1 15.6 26.3 5/10 P4SMA12A P4SMA12CA 12A 12C 10.2 11.4 12.6 1 16.7 24.6 5/10 P4SMA13A P4SMA13CA 13A 13C 11.1 12.4 13.7 1 18.2 22.5 1.0 P4SMA15A P4SMA15CA 15A 15C 12.8 14.3 15.8 1 21.2 19.3 1.0 P4SMA16A P4SMA16CA 16A 16C 13.6 15.2 16.8 1 22.5 18.2 1.0 P4SMA18A P4SMA18CA 18A 18C 15.3 17.1 18.9 1 25.5 16.1 1.0 P4SMA20A P4SMA20CA 20A 20C 17.1 19.0 21.0 1 27.7 14.8 1.0 P4SMA22A P4SMA22CA 22A 22C 18.8 20.9 23.1 1 30.6 13.4 1.0 P4SMA24A P4SMA24CA 24A 24C 20.5 22.8 25.2 1 33.2 12.3 1.0 P4SMA27A P4SMA27CA 27A 27C 23.1 25.7 28.4 1 37.5 10.9 1.0 P4SMA30A P4SMA30CA 30A 30C 25.6 28.5 31.5 1 41.4 9.9 1.0 P4SMA33A P4SMA33CA 33A 33C 28.2 31.4 34.7 1 45.7 9.0 1.0 P4SMA36A P4SMA36CA 36A 36C 30.8 34.2 37.8 1 49.9 8.2 1.0 P4SMA39A P4SMA39CA 39A 39C 33.3 37.1 41 1 53.9 7.6 1.0 P4SMA43A P4SMA43CA 43A 43C 36.8 40.9 45.2 1 59.3 6.9 1.0 P4SMA47A P4SMA47CA 47A 47C 40.2 44.7 49.4 1 64.8 6.3 1.0 P4SMA51A P4SMA51CA 51A 51C 43.6 48.5 53.6 1 70.1 5.8 1.0 P4SMA56A P4SMA56CA 56A 56C 47.8 53.2 58.8 1 77 5.3 1.0 P4SMA62A P4SMA62CA 62A 62C 53 58.9 65.1 1 85 4.8 1.0 P4SMA68A P4SMA68CA 68A 68C 58.1 64.6 71.4 1 92 4.5 1.0 P4SMA75A P4SMA75CA 75A 75C 64.1 71.3 78.8 1 103 4.0 1.0 P4SMA82A P4SMA82CA 82A 82C 70.1 77.9 86.1 1 113 3.6 1.0 10 P4SMA91A P4SMA91CA 91A 91C 77.8 86.5 95.5 1 125 3.3 1.0 P4SMA100A P4SMA100CA 100A 100C 85.5 95 105 1 137 3.0 1.0 P4SMA110A P4SMA110CA 110A 110C 94 105 116 1 152 2.7 1.0 P4SMA120A P4SMA120CA 120A 120C 102 114 126 1 165 2.5 1.0 P4SMA130A P4SMA130CA 130A 130C 111 124 137 1 179 2.3 1.0 Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 2 of 6 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA Electrical Characteristics (T Ambient=25C unless noted otherwise) Part NO. Device Marking Code Reverse Standoff Voltage Breakdown Voltage @ Test Current. V BR V WM Max. Clamping Voltage @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM Uni-Polar Bi-Polar Uni Bi (V) Min. Max. IT(mA) VC (V) IPPM (A) ID (A) P4SMA150A P4SMA150CA 150A 150C 128 143 158 1 207 2.0 1.0 P4SMA160A P4SMA160CA 160A 160C 136 152 168 1 219 1.9 1.0 P4SMA170A P4SMA170CA 170A 170C 145 162 179 1 234 1.8 1.0 P4SMA180A P4SMA180CA 180A 180C 154 171 189 1 246 1.7 1.0 P4SMA200A P4SMA200CA 200A 200C 171 190 210 1 274 1.5 1.0 P4SMA220A P4SMA220CA 220A 220C 185 209 231 1 328 1.3 1.0 P4SMA250A P4SMA250CA 250A 250C 214 237 263 1 344 1.2 1.0 Note: For bi-directional type having VWM of 10V and less, the ID limit is double. Fig.1- Peak Pulse Power Rating Curve Td - Pulse Width (sec.) PPPM or IPPM, Derating in Percentage (%) PPPM - Peak Pulse Power Dissipation (KW) Typical Characteristics Curves Fig.2- Pulse Derating Curve Ta - Ambient Temperature (C) Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 3 of 6 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA Fig.4 - Max. Non-Repetitive Forward Surge Current Uni-directional only IPPM - Peak Pulse Current (%) IFSM - Peak Forward Surge Current (A) Fig.3- Pulse Waveform Number of Cycles at 60Hz Fig.6- Typ. Junction Capacitance Uni-Directional Fig.5- Steady State Power Derating Curve CJ - Junction Capacitance (pF) PM(AV) Steady State Power Dissipation (W) T - Time (ms) VWM - Reverse Stand-Off Voltage (V) TL - Lead Temperature (C) Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 4 of 6 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA ID - Instantaneous Reverses Leakage Current (A) Fig.7 - Typical Reverse Leakage Characteristics V(BR) - Breakdown Voltage (V) Dimensions in inches (mm) SMA Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 5 of 6 400W Surface Mount Transient Voltage Suppressor P4SMA6.8A - P4SMA250CA How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 824-8766 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: taitron@taitroncomponents.com Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTACOES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAUDE - SAO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE METROBANK PLAZA, 1160 WEST YAN' AN ROAD, SUITE 1503, SHANGHAI, 200052, CHINA Tel: +86-21-5424-9942 Fax: +86-21-5424-9931 Rev. D/AH 2008-02-25 www.taitroncomponents.com Page 6 of 6