AC Film Capacitors Motor run B 32330/32 Construction n Dielectric: polypropylene film n Aluminum can n Soft polyurethane resin Features n n n n Self-healing properties Low dissipation factor Overpressure disconnection device High insulation resistance Typical applications For general sine wave applications, mainly as motor run capacitor Terminals n Single (B32330 series) or Double (B32332 series) fast on 6,3 x 0,8 mm Mounting parts n Metal stud (max. torque = 5 Nm) Technical data and specifications Standard IEC 60252 / EM 60252 Rated capacitance CN According to dimensions table Tolerance 5%, 6%, 10% Rated voltage UN According to dimensions table Rated frequency fN 50...60Hz Life expectance 10.000 h (class B) Maximum ratings Maximum permissible voltage Umax 1,1 x Un (Un= Rated voltage) Maximum permissible current Imax 1,3 x In (In = Rated current) Test data AC test voltage terminal to terminal U TT 2 x Un , 60s. (type test) Insulation voltage terminals to case 2000 Vac, 60s. (type test) Insulation resistance Ris or time constant at 20 C 3000 s Rel. Humidity 65 C (minimum value) Dissipation factor tan at 20 C 1,0 x10- 3 (120 Hz) Maximum rate of voltage rise du/dtmax 10 V/s Issue No. 1 08/02 Page 1 of 5 AC Film Capacitors Motor run B 32330/32 Technical data (contd) Climatic data Climatic category 25/085/21 according to IEC 60068-1 Lower category Tmin -25 C Upper category Tmax +85 C Damp heat test ttest 21 days Permitted capacitance C/C 3% Approved marks UL 810 10000 AFC EN 60252* * VDE approval for 400 and 450V series. Note : 1) It should be noted that presence of harmonics produces over voltage & over current on capacitors. Resonance may cause serious damage to installation if a significant level of total harmonic distortion level exists for voltage or current. In such cases, series reactors must be considered. 2) Operating temperature class: in accordance with the reference standards, these temperatures are those measured on the surface on the capacitor. Issue No. 1 08/02 Page 2 of 5 AC Film Capacitors Motor run B 32330/32 Dimensional drawings B32332 ... 07X Series B32330 ... 05X Series Issue No. 1 08/02 Page 3 of 5 AC Film Capacitors Motor run B 32330/32 Ordering codes and packing units UN CN Max. dimensions Ordering code [Vac] [F] d x l [mm] B3233* 250 4 ** 112 ** 112 ** 112 ** 112 ** 112 ** 112 ** 112 ** 84 ** 84 ** 84 ** 45 ** 45 ** 45 ** 45 ** 45 ** 45 ** 45 ** 112 ** 112 ** 112 ** 112 ** 112 ** 112 ** 84 ** 45 ** 45 ** 45 ** 45 -B1405-+0 5 30 x 68 -B1505-+0 6 30 x 68 -B1605-+0 7 30 x 68 -B1705-+0 8 30 x 68 -B1805-+0 10 30 x 68 -B1106-+0 12 15 20 30 x 68 35 x 68 35 x 68 -B1126-+0 -B1156-+0 -B1206-+0 25 35 x 78 -B1256-+0 30 40 x 78 -B1306-+0 35 400 30 x 68 Packing units 40 x 78 -B1356-+0 40 40 x 78 -B1406-+0 45 40 x 78 -B1456-+0 50 40 x 103 -B1506-+0 55 40 x 103 -B1556-+0 60 40 x 103 -B1606-+0 4 30 x 68 B4405-+0 5 30 x 68 -B4505-+0 6 30 x 68 -B4605-+0 7 30 x 78 -B4705-+0 8 30 x 78 -B4805-+0 10 12 15 30 x 78 35 x 78 40 x 78 -B4106-+0 -B4126-+0 -B4156-+0 20 40 x 78 -B4206-+0 25 40 x 103 -B4256-+0 30 40 x 103 -B4306-+0 Issue No. 1 08/02 Page 4 of 5 AC Film Capacitors Motor run B 32330/32 UN CN Max. Dimensions Ordering code [Vac] [F] d x l [mm] B3233* 400 (cont.) 35 40 50 x 103 ** 45 ** 32 ** 32 ** 32 ** 32 ** 112 ** 112 ** 112 ** 112 ** 112 ** 84 ** 45 ** 45 ** 45 ** 45 ** 45 ** 32 ** 32 ** 32 ** 32 ** 32 ** 28 ** 28 -B4356-+0 -B4406-+0 45 50 x 103 -B4456-+0 50 53 x 103 -B4506-+0 60 450 45 x 103 Packing units 53 x 130 -B4606-+0 3 30 x 68 -B6305-+0 4 30 X 68 -B6405-+0 5 6 7 30 x 78 30 x 78 30 x 78 -B6505-+0 -B6605-+0 B6705-+0 8 35 x 78 -B6805-+0 10 40 x 78 -B6106-+0 12 15 20 40 x 78 40 x 103 40 x 103 -B6126-+0 -B6156-+0 -B6206-+0 25 45 x 103 -B6256-+0 30 50 x 103 -B6306-+0 35 50 x 103 -B6356-+0 40 53 x 103 -B6406-+0 45 53 x 140 -B6456-+0 50 53 x 140 -B6506-+0 55 63.5 x 140 -B6556-+0 60 63.5 x 140 -B6606-+0 Notes for ordering code: 1. Replace * by : 0 - single tab fast-on. 2 - double tab fast-on. 2. For capacitance tolerance replace + by : J - 5%, E - 6%, K - 10% 3. Replace ** by : 50 - aluminum can 70 - aluminum can with M 8 fixing threaded bolt for 53mm. M 12 fixing threaded bolt for 63.5mm. EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. Issue No. 1 08/02 Page 5 of 5