TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 1 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
Micro-Fit (3.0)
Dual Row
Connector System
(Wire to Wire & Wire to Board)
1.0 SCOPE
This Test Specification covers the 3.00 mm (.118 inch) centerline (pitch) connector series terminated
with 20-30 AWG wire using crimp technology.
2.0 PRODUCT DESCRIPTION
2.1 PRODUCT NAME AND PART NUMBER(S)
Micro-Fit (3.0) Receptacle : 43025 Micro-Fit (3.0) Female Crimp Terminal : 43030
Micro-Fit (3.0) Plug : 43020 Micro-Fit (3.0) Male Crimp Terminal : 43031
Micro-Fit (3.0) Right Angle & Vertical Headers : 43045
2.2 DIMENSIONS, MATERIALS, PLATINGS AND MARKINGS
See the appropriate sales drawings for information on dimensions, materials, plating, and
markings.
2.3 PRODUCT SPECIFICATION TITLE AND DOCUMENT NUMBER
Product Specification ; Micro-Fit (3.0) Document Number : PS-43045
3.0 APPLICABLE DOCUMENTS AND SPECIFICATIONS
3.1 TESTING PROCEDURES AND SEQUENCES
EIA-364-1000.01
3.2 OTHER DOCUMENTS AND SPECIFICATIONS
none
4.0 QUALIFICATION
Laboratory conditions and sample selection are in accordance with EIA-364.
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 2 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.0 PERFORMANCE RESULTS
5.1
ELECTRICAL PERFORMANCE RESULTS
WIRE TO WIRE CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
1A
CONTACT
RESISTANCE
(LOW LEVEL)
Initial ** 10 milliohms MAXIMUM 19.95 mΩ
19.74 mΩ
20.40 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM -0.23 mΩ
-0.03 mΩ
0.67 mΩ
After Temperture
Life
∆ mΩ
20 milliohms MAXIMUM 0.38 mΩ 0.08 mΩ 1.01 mΩ
After Reseating
∆ mΩ 20 milliohms MAXIMUM 0.25 mΩ -0.53 mΩ
1.32 mΩ
NOTE : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE
OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION.
WIRE TO BOARD CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
1B
CONTACT
RESISTANCE
(LOW LEVEL)
Initial 10 milliohms MAXIMUM 4.75 mΩ 4.55 mΩ 4.98 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM -0.23 mΩ -0.03 mΩ 0.67 mΩ
After Temperture
Life
∆ mΩ
20 milliohms MAXIMUM 0.38 mΩ 0.08 mΩ 1.01 mΩ
After Reseating
∆ mΩ 20 milliohms MAXIMUM 0.25 mΩ -0.53 mΩ 1.32 mΩ
NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 3 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.1 ELECTRICAL PERFORMANCE RESULTS (continued)
WIRE TO WIRE CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
2A
Contact
Resistance
(Low Level)
Initial ** 10 milliohms MAXIMUM 20.01 mΩ
19.59 mΩ
23.29 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.19 mΩ -0.02 mΩ 0.64 mΩ
After Thermal Shock
∆ mΩ
20 milliohms MAXIMUM 0.34 mΩ 0.08 mΩ 0.74 mΩ
After Cyclic Humidity
∆ mΩ
20 milliohms MAXIMUM 0.62 mΩ 0.14 mΩ 1.77 mΩ
After Reseating
∆ mΩ 20 milliohms MAXIMUM 0.61 mΩ 0.11 mΩ 3.09 mΩ
NOTE : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE
OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION.
WIRE TO BOARD CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
2B
Contact
Resistance
(Low Level)
Initial 10 milliohms MAXIMUM 4.75 mΩ 4.55 mΩ 4.98 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.42 mΩ -0.02 mΩ 2.03 mΩ
After Thermal Shock
∆ mΩ
20 milliohms MAXIMUM 1.56 mΩ 0.25 mΩ 5.71 mΩ
After Cyclic Humidity
∆ mΩ
20 milliohms MAXIMUM 1.28 mΩ 0.15 mΩ 4.60 mΩ
After Reseating
∆ mΩ 20 milliohms MAXIMUM 2.19 mΩ 0.23 mΩ 8.04 mΩ
NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 4 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.1 ELECTRICAL PERFORMANCE RESULTS (continued)
WIRE TO BOARD CONFIGURATION – 2 CIRCUIT VERSION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
3A
Contact
Resistance
(Low Level)
Initial ** 10 milliohms MAXIMUM 10.26 mΩ
10.17 mΩ
10.46 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.75 mΩ 0.16 mΩ 1.57 mΩ
After Temperature Life
Pre-Conditioned
∆ mΩ
20 milliohms MAXIMUM 1.88 mΩ 0.58 mΩ 3.77 mΩ
After Vibration
∆ mΩ
20 milliohms MAXIMUM 1.28 mΩ 0.15 mΩ 4.60 mΩ
No Discontinuity Discontinuity < 1 microsecond
NOTE : ** APPROXIMATELY 7.8 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE
OF THE 6 INCHES OF WIRE USED IN SAMPLE PREPARATION.
WIRE TO BOARD CONFIGURATION –12 CIRCUIT VERSION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
3B
Contact
Resistance
(Low Level)
Initial ** 10 milliohms MAXIMUM 10.24 mΩ
9.85 mΩ 10.52 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.41 mΩ 0.14 mΩ 2.13 mΩ
After Temperature Life
Pre-Conditioned
∆ mΩ
20 milliohms MAXIMUM 0.81 mΩ 0.16 mΩ 3.68 mΩ
After Vibration
∆ mΩ
20 milliohms MAXIMUM 1.14 mΩ 0.25 mΩ 3.56 mΩ
No Discontinuity Discontinuity < 1 microsecond
NOTES : ** APPROXIMATELY 7.8 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE
OF THE 6 INCHES OF WIRE USED IN SAMPLE PREPARATION.
SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 5 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.1 ELECTRICAL PERFORMANCE RESULTS (continued)
WIRE TO WIRE CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
4A
Contact
Resistance
(Low Level)
Initial
** 10 milliohms MAXIMUM 20.07 mΩ
19.95 mΩ
20.50 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.31 mΩ -0.02 mΩ 0.72 mΩ
After Temperature Life
Pre-Conditioned
∆ mΩ
20 milliohms MAXIMUM 0.34 mΩ 0.07 mΩ 0.97 mΩ
Thermal Cycling
167 Hours
∆ mΩ
20 milliohms MAXIMUM 0.42 mΩ 0.10 mΩ 2.01 mΩ
Thermal Cycling
334 Hours
∆ mΩ
20 milliohms MAXIMUM 0.41 mΩ -0.06 mΩ 1.03 mΩ
Thermal Cycling
500 Hours
∆ mΩ
20 milliohms MAXIMUM 0.64 mΩ 0.03 mΩ 2.79 mΩ
After
Reseating
∆ mΩ
20 milliohms MAXIMUM 0.54 mΩ 0.14 mΩ 2.45 mΩ
NOTES : ** APPROXIMATELY 16.6 mΩ OF THE MEASUREMENT VALUE IS ATTRIBUTED TO THE BULK RESISTANCE
OF THE 13 INCHES OF WIRE USED IN SAMPLE PREPARATION.
SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 6 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.1 EL
ECTRICAL PERFORMANCE RESULTS (continued)
WIRE TO BOARD CONFIGURATION
ITEM
DESCRIPTION
TREATMENT REQUIREMENT MEAN MINIMUM
MAXIMUM
4B
Contact
Resistance
(Low Level)
Initial
10 milliohms MAXIMUM 4.78 mΩ 4.56 mΩ 5.53 mΩ
After Durability
∆ mΩ
20 milliohms MAXIMUM 0.48 mΩ 0.06 mΩ 2.35 mΩ
After Temperature Life
Pre-Conditioned
∆ mΩ
20 milliohms MAXIMUM 1.07 mΩ 0.13 mΩ 5.80 mΩ
Thermal Cycling
167 Hours
∆ mΩ
20 milliohms MAXIMUM 1.38 mΩ 0.30 mΩ 4.68 mΩ
Thermal Cycling
334 Hours
∆ mΩ
20 milliohms MAXIMUM 1.63 mΩ 0.31 mΩ 5.17 mΩ
Thermal Cycling
500 Hours
∆ mΩ
20 milliohms MAXIMUM 3.04 mΩ 0.69 mΩ 8.51 mΩ
After
Reseating
∆ mΩ
20 milliohms MAXIMUM 3.48 mΩ 0.41 mΩ 8.94 mΩ
NOTE : SEE APPENDIX “A” FOR TEST SEQUENCE DESCRIPTION
5.1 ELECTRICAL PERFORMANCE RESULTS (continued)
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 7 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
ITEM DESCRIPTION WIRE GAUGE REQUIREMENT AMPERAGE
5
Temperature Rise
&
Current Cycling
30 AWG
30°C Max. Temp. Rise 2.5 Amps
26 AWG 30°C Max. Temp. Rise 3.0 Amps
24 AWG 30°C Max. Temp. Rise 4.0 Amps
20 AWG 30°C Max. Temp. Rise 5.5 Amps
6.1 MECHANICAL PERFORMANCE RESULTS
ITEM DESCRIPTION
Wire Gauge REQUIREMENT MEAN MINIMUM
MAXIMUM
6
Wire
Pullout
Force
(Newtons)
20 AWG
57.8 N Minimum
127.4 117.5 134.7
22 AWG 35.6 N Minimum 86.1 80.2 90.4
24 AWG 22.2 N Minimum 53.6 44.7 58.08
26 AWG 13.3 N Minimum 36.1 33.8 38.3
28 AWG 8.9 N Minimum 21.1 18.1 23.2
30 AWG 6.6 N Minimum 18.2 13.5 24.6
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 8 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
5.1 MECHANICAL PERFORMANCE RESULTS (continued)
ITEM
DESCRIPTION REQUIREMENT MEAN MINIMUM MAXIMUM
7
Contact Normal
Force
(grams)
275 g Min 331 g 322 g 343 g
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 9 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
APPENDIX A
TEST SEQUENCES
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 10 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
A.1 TEST SEQUENCES
SEQUENCE 1 SEQUENCE 2
1A Wire to Wire 2A Wire to Wire
1B Wire to Board 2B Wire to Board
Durablity (20x)
Contact
Resistance
Temperature Life
105°C. 240 hours
Contact Resistance
Reseating
(3x)
Final
Contact Resistance
Initial Contact
Resistance
Durablity (20x)
Contact Resistance
Cyclic Humidity
+25/+65°
80-50% RH
Contact Resistance
Initial Contact
Resistance
Contact
Resistance
Thermal Shock
-55/+85°C.
30 min. dwell
Reseating
(3x)
Final
Contact Resistance
TEST SUMMARY
REVISION: ECR/ECN INFORMATION: TITLE: TEST SUMMARY
MICRO-FIT (3.0)
DUAL ROW CONNECTORS
SHEET No.
A1 EC No: UCP2014-1894 11 of 11
DATE: 2013 / 10 / 28
DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY:
TS
-
43045
-
001
GB 10/28/13 SSOUSEK 10/29/13 FSMITH 10/29/13
TEMPLATE FILENAME: TEST_SUMMARY[SIZE_A](V.1).DOC
A.1 TEST SEQUENCES (continued)
SEQUENCE 3 SEQUENCE 4
3A Wire to Wire 4A Wire to Wire
3B Wire to Board 4B Wire to Board
Initial Contact
Resistance
Contact Resistance
Final Contact
Resistance
Initial Contact
Resistance
Contact Resistance
Temperature Life
Pre-Cond. 105°C
120 hours
Durability (20x)
Contact Resistance
Random Vibration
(with Discontinuity)
Durability (20x)
Temperature Life
Pre-Cond. 105°C
120 hours
Contact Resistance
Thermal Cycling
+15/+85°C.
500 hours
Contact Resistance
Reseating (3x)
Final Contact
Resistance
