0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One(R) HS* by THine *High speed serial interface technology for picture transmission Features Inserting FFC 1. Accepts impedance matched shielded FFC The FH48 Series is equipped with a ground terminal and can be used with impedance matched, shielded FFC. 2. Impedance matched terminal design The signal terminal is designed for impedance control and is capable of handling high speed transmissions. 3. Highly reliable and secure structure The design of the FH48 series follows in the footsteps of another popular Hirose connector, the FH40 series. The FFC positioning mechanism and rugged structure combine to prevent accidental unlocking and produce a secure connection. Lock completed 4. Simplified operations with a flip lock system The flip lock design allows a smoother simpler FFC operation. It requires less force to rotate the actuator and delivers a tactile click to reinforce that the lock has secured the connection. 5. Suitable for automatic pick-n-place mounting O f fe r e d i n t a p e a n d r e e l p a ck a g i n g t h a t i s compatible with automatic machine mounting. (1,000 pieces per reel) Click 6. Halogen free All materials and substances used to produce this product comply with Halogen-free standards.*Standards by IEC 61249-2-21Br: 900ppm or lower, Cl: 900ppm or lower, Br+Cl: 1,500ppm or lower Uses the same FFC that the FH41 Series (horizontal connection) uses. Shielded FFC Signal connection area FH48 and FH41 use the same FFC layout. FFC Ground contact connection area 2013.11 1 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors Product specifications Storage Operating Rated -10 to +50C (Note 3) -40 to +85C (Note 2) 0.5A (Note 1) temperature range temperature range current Rating Relative humidity of Rated Operating humidity Storage humidity AC 50 Vrms 90% or lower (no dew voltage range range condensation) Applicable FPC and FFC terminal specifications Items Relative humidity of 90% or lower (no dew condensation) t= 0.3 0.05, gold plating (GND plate: t= 0.5 0.05, tin plating) Specifications Conditions 1. Insulation resistance Minimum of 500 Mo Measured at DC 100 V. 2. Withstanding voltage No flashover or insulation damage AC 150 Vrms applied for 1 minute 3. Contact resistance Maximum of 100 mo *Incl. FFC conductor resistance Measured at 1mA. 4. Durability Contact resistance: Maximum of 100 mo No damage, cracks or loose part. 20 mating cycles 5. Vibration resistance No electrical discontinuity for more than 1s Contact resistance: Maximum of 100 mo No damage, cracks or loose part. Frequency 10 to 55Hz with half amplitude 0.75mm in 3 directions, 10 cycles each. 6. Impact resistance No electrical discontinuity for more than 1s Contact resistance: Maximum of 100 mo No damage, cracked or loose parts. Acceleration: 981m/s , duration time: 6ms, With half sine waves in 3 both directions, 3 times each. 7. Humidity resistance in ordinary conditions Contact resistance: Maximum of 100 mo Insulation resistance: Minimum of 50 Mo No damage, cracked or loose parts. Left for 96 hours at temperature 40c, humidity 90 to 95% 8. Temperature cycle Contact resistance: Maximum of 100 mo Insulation resistance: Minimum of 50 Mo No damage, cracked or loose parts. Temperature: -40 +15 to +35 +85 +15 to +35c Time: 30 2 to 3 30 2 to 3 min. 5 cycles in the above conditions 9. Solder heat resistance No external deformation or significant shaking of terminal Reflow: Recommended temperature profile Manual soldering: 3505c for 5 sec. 2 (Note 1) Use 70% of the rated current for all the cores. (Note 2) Including the temperature increase when the power is on. (Note 3) Here, the storage means that unused products are stored before installed on a board for a long period of time. For the products installed on a board with no power supplied, the operating temperature and humidity ranges shall be applied. Materials Parts Materials Insulating parts Color/finishing Gray LCP Terminal Black Phosphor bronze Lock metal parts Remarks UL94V-0 Gold plating Pure tin reflow plating Phosphor bronze (plating material) - Nickel plating Product number structure Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. FH 48 - 50S - 0.5 SV Series name: FH Contact pitch: 0.5 mm Series number: 48 Terminal shape SV***SMT vertical implementation type Number of contacts: 20 to 68 2 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors Connector dimension diagram (6.47) (4.1) (A) B 0 ) 1 No. of contacts Cavity no. indication Locked 1.18 4.7 (3.47) (5.32) 0.5 (1.48) (C) D E (2.31) (0.12) 6.68 6.18 (1.6) 2.5 (9 (0.12) 0.75 Note 1. The flatness of the terminal and the metal lead is 0.1 MAX. 2. This product is emboss packaged. For details, see the package specification diagram on page 6. 3. Black marks may appear in the mold resin, but they will not negatively affect the performance of these connectors. 4. The color of the plating may change after the reflow process, but it will not negatively affect the performance of these connectors. Connector dimension table Product number Unit: mm HRS No. Number of contacts Number of ground contacts A B C D E FH48-20S-0.5SV CL580-3104-1-00 20 4 10.57 7.5 8.37 9.5 15 FH48-21S-0.5SV CL580-3103-9-00 21 4 11.07 7.5 8.87 10 15.5 FH48-31S-0.5SV CL580-3102-6-00 31 6 16.07 12.5 10.37 15 20.5 FH48-40S-0.5SV CL580-3100-0-00 40 8 20.57 17.5 10.37 19.5 25 FH48-50S-0.5SV CL580-3101-3-00 50 10 25.57 22.5 10.37 24.5 30 FH48-68S-0.5SV CL580-3105-4-00 68 13 34.57 30 10.37 33.5 39 (Note 1) This product is packaged on tape and reel and is only sold in full reel quantities of 1,000 pieces per reel. Please place orders by full reel quantities. 3 '#*%#%* %#.%#%(BZiVabVh 7%#%* %#(%#%(AVcYeViiZgc %#'-%#%(BZiVabVh *#'%#%* BRecommended land and metal mask dimension diagram &#'%#%*AVcYeViiZgc FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors %#*%#%* 9%#%* GZXdbbZcYZYbZiVabVhi]^XcZhh/i2%#&' &#'&%#%(BZiVabVh %#(%#%(AVcYeViiZgc %#'-%#%(BZiVabVh &#+(%#%*AVcYeViiZgc &%#%* BRecommended FFC dimension diagram .2 2- R0 0.1 .2 0.50.1 0.50.05 0.30.03 0.50.05(Ground plate thickness) 0.30.05(End conductor thickness) 0.1MIN 5.5MIN 0.1 2.60.1 3.80.1 R0 1.90.1 0.50.1 2- 17.7MAX 5.5MIN 2.60.5 2.10.5 F0.1 G0.07 D0.05 Ground plate .2MA Shielded area 2-R0 2-R 0.2 MA X X 1 Note : Place the shielded area on the ground plate. BRecommended land, metal mask and FFC dimension table Unit: mm Product number 4 HRS No. Number of contacts Number of ground contacts B D F G FH48-20S-0.5SV CL580-3104-1-00 20 4 7.5 9.5 11.7 10.5 FH48-21S-0.5SV CL580-3103-9-00 21 4 7.5 10 12.2 11 FH48-31S-0.5SV CL580-3102-6-00 31 6 12.5 15 17.2 16 FH48-40S-0.5SV CL580-3100-0-00 40 8 17.5 19.5 21.7 20.5 FH48-50S-0.5SV CL580-3101-3-00 50 10 22.5 24.5 26.7 25.5 FH48-68S-0.5SV CL580-3105-4-00 68 13 30 33.5 35.7 34.5 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors BFH48 Series FFC material structure (recommended specifications) Material name Materials Total Thickness at Total Thickness at Ground Plate (m) End Conductor (m) Shielding Material Shielded area Conductive Adhesive Polyester Type 70 Copper Foil (Tin plating) Ground plate Adhesive Acrylic Type 24 Base Film Polyester Type 12 Adhesive Acrylic Type 24 Insulation Layer Polyester Type 25 Adhesive Polyester Type 35 Soft Copper Foil 35 35 (Nickel Under Plating + Gold Plating) Shielded area Adhesive Polyester Type 35 35 Insulator Layer Polyester Type 25 25 Adhesive Polyester Type 30 30 Stiffener Polyester Type 188 188 503 313 Total Contact us to change this specifications and thickness configuration. BTemperature profile MAX 250c 250 Temperature (c) 230c 200 200c 150 150c Application conditions Reflow type : Reflow with far-infrared ray and hot air combined Reflow furnace atmosphere : Air Solder : Cream type Sn/3.0Ag/0.5Cu (Senju Metal Industry, M705-221CM5-42-10.5) Test board : Board material and size Glass epoxy 25x55x1.0mm Land dimension 0.3x1.63, 0.3x1.2 mm Metal mask : Thickness 0.12 mm Opening dimensions 0.28x1.21, 0.28x0.9 mm 100 50 25c (60 sec.) 0 90 to 120 sec. Pre-heat time (60 sec.) Soldering time This solder profile is based on the conditions provided above. Please check the mounting conditions before use, conditions such as solder paste types, manufacturer, PCB size and any other soldering materials may alter the performance of such materials. Start Time (sec.) 5 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors BPackage specification diagram B^c^bjbiVeZl^Yi]/('bb = ? &#,%#&* % &#&( '#&, &#+/6jidbVi^X^beaZbZciVi^dckVXjjbe^X"jeVgZV C/6jidbVi^X^beaZbZciVi^dckVXjjbe^X"jeVgZV Ejaa^c\Y^gZXi^dc = = ? &#&( '#&, *#- ,#*- %#* = & %# % &#+/6jidbVi^X ^beaZbZciVi^dckVXjjbe^X"jeVgZV C/6jidbVi^X ^beaZbZciVi^dckVXjjbe^X"jeVgZV #* & %# % #* &'%#& )%#& '%#&* ,#*- %#* & & &'%#& )%#& '%#&* &#,*%#& @%#& B%#( BVm^bjbiVeZl^Yi]/')bb &#,*%#& @%#& A%#& B%#( Emboss carrier tape dimension diagram &#*%#& % *#- Ejaa^c\Y^gZXi^dc 8A 8A Reel dimension diagram (-% -% E/DjiZgl^Yi] F/>ccZgl^Yi] ( & :cYeVgi 6iiVX]bZcieVgi B^c^bjbd[)%%bb :bWdhhXVgg^ZgiVeZ :beinb^c^bjbd[&)edXZih 8dkZgiVeZ :beinb^c^bjbd[&%edXZih BPackage specification dimension table Unit: mm Product number 6 HRS No. Number of Number of contacts ground contacts H J K L M N P Q - 24 8.37 29.4 25.4 FH48-20S-0.5SV CL580-3104-1-00 20 4 13.37 15.3 11.5 FH48-21S-0.5SV CL580-3103-9-00 21 4 13.87 15.8 11.5 - 24 8.87 29.4 25.4 FH48-31S-0.5SV CL580-3102-6-00 31 6 18.87 20.8 20.2 40.4 44 10.37 49.4 45.4 FH48-40S-0.5SV CL580-3100-0-00 40 8 23.37 25.3 20.2 40.4 44 10.37 49.4 45.4 FH48-50S-0.5SV CL580-3101-3-00 50 10 28.37 30.3 20.2 40.4 44 10.37 49.4 45.4 FH48-68S-0.5SV CL580-3105-4-00 68 13 37.37 39.3 26.2 52.4 56 10.37 61.4 57.4 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors BConnector handling and precautions Handling and precautions Care must be taken to the handling of this connector. Check the followings before using the product. The figures and values described in the precautions may differ from the standard values of the product. [Precautions for board implementation] Board warp Avoid board warp if possible. The flatness of the connector is 0.1mm or smaller, and a large warp could cause solder failure. Load on connector When the emboss is extracted from the reel or when the connector is vacuum picked up from the emboss, avoid an excessive force (over 1 N) to the un-mounted connector. Otherwise the connector could be damaged. Also, do not insert FFC or handle the connector before inserting the connector. [Precautions for board handling after implementation] &B6M &%% 8dccZXidg 7dVgY 8dccZXidg &B6M Load on board -When a board is divided to make multiple boards -When a board is fixed with screws. In the assembling process such as the above, no load should be applied to the board. Otherwise the connector could be damaged. Board warp When the board width is 100mm, the board warp should be 1mm or smaller for the use. (Right figure) The board warp could cause a load on the connector and damage it. 7dVgY &%% [Precautions for FFC insertion and mating] Opening and closing of actuator The connector, when delivered, is ready for FFC insertion. When FFC is inserted and the actuator is rotated by 90, the connector is in a FFC mating locked state. Do not rotate the actuator before inserting FFC. Contact direction Insert the connector with the FFC's exposed conductor side on the housing and with the FFC stiffening plate on the actuator. ;;8hi^[[Zc^c\eaViZ 6XijVidg 6XijVidg :medhZY[VXZd[;;8XdcYjXidg =djh^c\ 6XijVidg .% 8dccZXidg^cYZa^kZgnhiViZ ;;8XVcWZ^chZgiZY# ;;8^chZgi^dchiVgih ;;8bVi^c\adXZY FFC insertion Securely insert FFC vertically to the connector. 7 FH48 Series0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors Handling and precautions Actuator handling (1) The actuator can rotate about the rotation axis. Handle it as it rotates. (2) The actuator does not rotate by more than 90. Do not apply an excessive force to rotate it more. Otherwise the terminal is deformed or the actuator is damaged. (3) Do not pull or hook the actuator. Otherwise damage could be caused. (Only the rotation motion described above is allowed.) GdiVi^dcVm^h .% Check of lock (1) When locking the actuator, make sure that it is parallel to the board face. (2) After mating and locking FFC, make sure that the FFC positioning tab does not come on the FFC positioning guide. If the FFC positioning tab runs over the FFC positioning guide, contact failure could be caused. ;;8edh^i^dc^c\\j^YZ ;;8edh^i^dc^c\iVW [Precautions for FFC handling after mating FFC] Load on FFC When handling FFC, do not apply a load directly to it. If FFC is bent near the connector when it is used, contact failure ordisconnection or damage of FFC could be caused. In particular, do not bend FFC sharply at the insertion point to the actuator direction. Load: 0.05x n N MAX (n: No. of pos.) , [Precautions for pulling FFC] FFC needs to be pulled out with the actuator locked. To circumvent the FFC positioning guide, pull it out at an angle of about 7 from the perpendicular direction to the board. ;;8edh^i^dc^c\\j^YZ [Other precautions] ;;8edh^i^dc^c\iVW Precautions for manual soldering For manual soldering for repair or other purposes, see the followings. (1) Do not make reflow or manual soldering with FFC inserted in the connector. (2) Do not apply excessive heat. Prevent a soldering iron from contacting a part other than the lead wire of the connector. Otherwise the connector may deform or melt. (3) Do not supply an excessive amount of solder (flux). If too much solder (flux) is applied on the terminal, a part of the solder or flux would adhere to the contact or actuator's rotation axis and cause contact failure or rotation failure of the actuator. (R) 8 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: FH48-31S-0.5SV FH48-40S-0.5SV FH48-50S-0.5SV FH48-68S-0.5SV FH48-20S-0.5SV FH48-21S-0.5SV