1
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
FH48 Series
2013.11
■Features
1.
Accepts impedance matched shielded FFC
The FH48 Series is equipped with a ground
terminal and can be used with impedance matched,
shielded FFC.
2. Impedance matched terminal design
The signal terminal is designed for impedance
control and is capable of handling high speed
transmissions.
3. Highly reliable and secure structure
The design of the FH48 series follows in the
footsteps of another popular Hirose connector, the
FH40 series. The FFC positioning mechanism and
rugged structure combine to prevent accidental
unlocking and produce a secure connection.
4.
Simplified operations with a flip lock system
The flip lock design allows a smoother simpler FFC
operation. It requires less force to rotate the
actuator and delivers a tactile click to reinforce that
the lock has secured the connection.
5.
Suitable for automatic pick-n-place mounting
Offered in tape and reel packaging that is
compatible with automatic machine mounting.
(1,000 pieces per reel)
6. Halogen free
All materials and substances used to produce this
product comply with Halogen-free standards.*Standards
by IEC 61249-2-21Br: 900ppm or lower, Cl: 900ppm or
lower, Br+Cl: 1,500ppm or lower
*High speed serial interface
technology for picture transmission
Supports the next generation chip
V-by-One® HS* by THine
Click
FH48 and FH41 use
the same FFC layout.
●Inserting FFC
●Lock completed
● Uses the same FFC that the FH41 Series
(horizontal connection) uses.
●Shielded FFC
Signal connection area
Ground contact connection area
FFC
2
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
■Product specifi cations
Rating
Rated
current 0.5A (Note 1) Operating
temperature range -40 to +85°C (Note 2) Storage
temperature range -10 to +50°C (Note 3)
Rated
voltage AC 50 Vrms Operating humidity
range
Relative humidity of
90% or lower (no dew
condensation)
Storage humidity
range
Relative humidity of
90% or lower (no dew
condensation)
Applicable FPC and FFC terminal specifi cations t= 0.3 ±0.05, gold plating (GND plate: t= 0.5 ±0.05, tin plating)
Items Specifi cations Conditions
1. Insulation resistance Minimum of 500 Mø Measured at DC 100 V.
2. Withstanding voltage No fl ashover or insulation damage AC 150 Vrms applied for 1 minute
3. Contact resistance Maximum of 100 mø
*Incl. FFC conductor resistance Measured at 1mA.
4. Durability Contact resistance: Maximum of 100 mø
No damage, cracks or loose part. 20 mating cycles
5. Vibration resistance
No electrical discontinuity for more than 1µs
Contact resistance: Maximum of 100 mø
No damage, cracks or loose part.
Frequency 10 to 55Hz with half amplitude 0.75mm
in 3 directions, 10 cycles each.
6. Impact resistance
No electrical discontinuity for more than 1µs
Contact resistance: Maximum of 100 mø
No damage, cracked or loose parts.
Acceleration: 981m/s2, duration time: 6ms, With
half sine waves in 3 both directions, 3 times
each.
7. Humidity resistance
in ordinary conditions
Contact resistance: Maximum of 100 mø
Insulation resistance: Minimum of 50 Mø
No damage, cracked or loose parts.
Left for 96 hours at temperature 40ç, humidity 90
to 95%
8. Temperature cycle
Contact resistance: Maximum of 100 mø
Insulation resistance: Minimum of 50 Mø
No damage, cracked or loose parts.
Temperature: -40 ➝ +15 to +35 ➝ +85 ➝ +15 to +35ç
Time: 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 min.
5 cycles in the above conditions
9. Solder heat
resistance
No external deformation or signifi cant shaking
of terminal
Refl ow: Recommended temperature profi le
Manual soldering: 350±5ç for 5 sec.
(Note 1) Use 70% of the rated current for all the cores.
(Note 2) Including the temperature increase when the power is on.
(Note 3) Here, the storage means that unused products are stored before installed on a board for a long period of time.
For the products installed on a board with no power supplied, the operating temperature and humidity ranges shall be
applied.
■Materials
Parts Materials Color/fi nishing Remarks
Insulating parts LCP Gray UL94V-0
Black
Terminal Phosphor bronze Gold plating
−
Pure tin refl ow plating
Lock metal parts Phosphor bronze (plating material) Nickel plating
■Product number structure
Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in
this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please
make sure to check the latest delivery specifications at the time of product use.
FH 48 − 50S − 0.5 SV
❶❷ ❸ ❹❺
❹ Contact pitch: 0.5 mm
❺ Terminal shape
SV···SMT vertical implementation type
❶ Series name: FH
❷ Series number: 48
❸ Number of contacts: 20 to 68
3
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
■Connector dimension diagram
■Connector dimension table Unit: mm
Product number HRS No. Number of contacts
Number of ground contacts
ABCDE
FH48-20S-0.5SV CL580-3104-1-00 20 4 10.57 7.5 8.37 9.5 15
FH48-21S-0.5SV CL580-3103-9-00 21 4 11.07 7.5 8.87 10 15.5
FH48-31S-0.5SV CL580-3102-6-00 31 6 16.07 12.5 10.37 15 20.5
FH48-40S-0.5SV CL580-3100-0-00 40 8 20.57 17.5 10.37 19.5 25
FH48-50S-0.5SV CL580-3101-3-00 50 10 25.57 22.5 10.37 24.5 30
FH48-68S-0.5SV CL580-3105-4-00 68 13 34.57 30 10.37 33.5 39
(Note 1) This product is packaged on tape and reel and is only sold in full reel quantities of 1,000 pieces per reel. Please place
orders by full reel quantities.
(90°)
(4.1)
(6.47)
6.18
6.68
(5.32)
(1.48)
(3.47)
(2.31)
0.751.18 4.7
Locked
(C)
2.5
0.5
(0.12)
(0.12)
(1.6)
(A)
1
B
E
D
Cavity no. indication
No. of contacts
Note 1. The fl atness of the terminal and the metal lead is 0.1 MAX.
2. This product is emboss packaged. For details, see the package specifi cation diagram on page 6.
3. Black marks may appear in the mold resin, but they will not negatively affect the performance of
these connectors.
4. The color of the plating may change after the refl ow process, but it will not negatively affect the
performance of these connectors.
4
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
B
Recommended land and metal mask dimension diagram
BRecommended FFC dimension diagram
BRecommended land, metal mask and FFC dimension table
Unit: mm
Product number HRS No. Number of contacts Number of ground contacts B D F G
FH48-20S-0.5SV CL580-3104-1-00 20 4 7.5 9.5 11.7 10.5
FH48-21S-0.5SV CL580-3103-9-00 21 4 7.5 10 12.2 11
FH48-31S-0.5SV CL580-3102-6-00 31 6 12.5 15 17.2 16
FH48-40S-0.5SV CL580-3100-0-00 40 8 17.5 19.5 21.7 20.5
FH48-50S-0.5SV CL580-3101-3-00 50 10 22.5 24.5 26.7 25.5
FH48-68S-0.5SV CL580-3105-4-00 68 13 30 33.5 35.7 34.5
*#'¤%#%*
'#*¤%#%*
%#*¤%#%*
&¤%#%*
&#+(¤%#%*AVcYeViiZgc &#'¤%#%*AVcYeViiZgc
%#(¤%#%(AVcYeViiZgc
%#(¤%#%(AVcYeViiZgc
7¤%#%*
9¤%#%*
GZXdbbZcYZYbZiVabVh`i]^X`cZhh/i2%#&'
%#.¤%#%(BZiVabVh`
&#'&¤%#%(BZiVabVh`
%#'-¤%#%(BZiVabVh`
%#'-¤%#%(BZiVabVh`
Ground plate
Shielded area
1
D±0.05
G±0.07
F±0.1
0.3±0.030.5±0.05
0.5±0.1
2.1±0.5
2.6±0.5
0.1MIN
5.5MIN
1.9±0.1
2.6±0.1
3.8±0.1
5.5MIN
0.3±0.05(End conductor thickness)
0.5±0.05(Ground plate thickness)
17.7MAX
0.5±0.1
2-R0.2±0.1
2-R0.2±0.1
2-R0.2MAX
2-R0.2MAX
: Place the shielded area on the ground plate.Note
5
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
BFH48 Series FFC material structure (recommended specifi cations)
  Contact us to change this specifications and thickness configuration.
Shielded area
Ground plate
Shielded area
Total Thickness at
Ground Plate (μm)
Total Thickness at
End Conductor (μm)
Polyester Type
Polyester Type
188
30
25
35
35
35
25
24
12
24
Polyester Type
Shielding Material
Conductive Adhesive
Polyester Type
Polyester Type
Polyester TypeStiffener
Polyester Type
Polyester Type
SoftCopperFoil
(NickelUnderPlating+GoldPlating)
Adhesive
Insulator Layer
Adhesive
Adhesive
Insulation Layer
Adhesive
Base Film
Adhesive
Copper Foil (Tin plating)
Acrylic Type
70
MaterialsMaterial name
Acrylic Type
Total 503 313
35
35
25
30
188
BTemperature profi le
Application conditions
Refl ow type : Refl ow with far-infrared ray and hot
air combined
Refl ow furnace atmosphere : Air
Solder : Cream type Sn/3.0Ag/0.5Cu
(Senju Metal Industry, M705-221CM5-42-10.5)
Test board : Board material and size
Glass epoxy 25x55x1.0mm
Land dimension 0.3x1.63, 0.3x1.2 mm
Metal mask : Thickness 0.12 mm
Opening dimensions 0.28x1.21, 0.28x0.9 mm
This solder profi le is based on the conditions provided
above.
Please check the mounting conditions before use,
conditions such as solder paste types, manufacturer,
PCB size and any other soldering materials may alter
the performance of such materials.
MAX 250ç
Start
Time (sec.)
25ç
(60 sec.) (60 sec.)90 to 120 sec.
Pre-heat time
Soldering time
0
50
100
150
Temperature (ç)
150ç
200ç
230ç
200
250
6
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
BPackage specifi cation dimension table
Unit: mm
Product number HRS No. Number of
contacts
Number of
ground contacts HJKLMNPQ
FH48-20S-0.5SV CL580-3104-1-00 20 4 13.37 15.3 11.5 - 24 8.37 29.4 25.4
FH48-21S-0.5SV CL580-3103-9-00 21 4 13.87 15.8 11.5 - 24 8.87 29.4 25.4
FH48-31S-0.5SV CL580-3102-6-00 31 6 18.87 20.8 20.2 40.4 44 10.37 49.4 45.4
FH48-40S-0.5SV CL580-3100-0-00 40 8 23.37 25.3 20.2 40.4 44 10.37 49.4 45.4
FH48-50S-0.5SV CL580-3101-3-00 50 10 28.37 30.3 20.2 40.4 44 10.37 49.4 45.4
FH48-68S-0.5SV CL580-3105-4-00 68 13 37.37 39.3 26.2 52.4 56 10.37 61.4 57.4
●Emboss carrier tape dimension diagram
BPackage specifi cation diagram
●Reel dimension diagram
&'¤%#&
?
C/6jidbVi^X^beaZbZciVi^dckVXjjbe^X`"jeVgZV
&#+/6jidbVi^X^beaZbZciVi^dckVXjjbe^X`"jeVgZV
'¤%#&*
?
&#&(
'#&,
*#-
)¤%#& %#*
,#*-
B¤%#(
@¤%#&
&#,*¤%#&
=
C/6jidbVi^X
^beaZbZciVi^dckVXjjbe^X`"jeVgZV
&#+/6jidbVi^X
^beaZbZciVi^dckVXjjbe^X`"jeVgZV
=
=
=
&#,*¤%#&
&#*＋%#&
 %
@¤%#&
B¤%#(
A¤%#&
,#*-
%#*
&'¤%#&
)¤%#&
'¤%#&*
*#-
'#&,
&#&(
¢&#*＋%#&
 %
¢&#*
＋%#&
 %
&#,＋%#&*
 %
Ejaa^c\Y^gZXi^dc
Ejaa^c\Y^gZXi^dc
A
8
BVm^bjbiVeZl^Yi]/')bb B^c^bjbiVeZl^Yi]/('bb
8
A
E/DjiZgl^Yi]
F/>ccZgl^Yi]
¢-%
¢(-%
:beinb^c^bjbd[&%edX`Zih
:beinb^c^bjbd[&)edX`Zih
:cYeVgi 6iiVX]bZcieVgi B^c^bjbd[)%%bb
¢&(
:bWdhhXVgg^ZgiVeZ
8dkZgiVeZ
7
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
BConnector handling and precautions
Handling and precautions
Care must be taken to the handling of this connector. Check the followings before using the product. The fi gures and values
described in the precautions may differ from the standard values of the product.
[Precautions for board implementation]
◆Board warp
Avoid board warp if possible.
The flatness of the connector is 0.1mm or smaller, and a large warp could cause solder failure.
◆Load on connector
When the emboss is extracted from the reel or when the connector is vacuum picked up from the emboss, avoid an
excessive force (over 1 N) to the un-mounted connector. Otherwise the connector could be damaged.
Also, do not insert FFC or handle the connector before inserting the connector.
[Precautions for board handling after implementation]
◆Load on board
-When a board is divided to make multiple boards
-When a board is fixed with screws.
In the assembling process such as the above, no load should be applied to
the board. Otherwise the connector could be damaged.
◆Board warp
When the board width is 100mm, the board warp should be 1mm or smaller
for the use. (Right figure)
The board warp could cause a load on the connector and damage it.
[Precautions for FFC insertion and mating]
◆Opening and closing of actuator
The connector, when delivered, is ready for FFC insertion. When FFC is inserted and the actuator is rotated by 90°,
the connector is in a FFC mating locked state. Do not rotate the actuator before inserting FFC.
◆Contact direction
Insert the connector with the FFC’s exposed conductor side on the housing and with the FFC stiffening plate on the
actuator.
◆FFC insertion
Securely insert FFC vertically to the connector.
6XijVidg =djh^c\
.%
8dccZXidg^cYZa^kZgnhiViZ
;;8XVcWZ^chZgiZY#
;;8bVi^c\adX`ZY
6XijVidg
6XijVidg
;;8^chZgi^dchiVgih
:medhZY[VXZd[;;8XdcYjXidg
;;8hi^[[Zc^c\eaViZ
8dccZXidg
8dccZXidg
7dVgY
7dVgY
&B6M
&%%
&B6M
&%%
8
FH48 Series●0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
Handling and precautions
◆Actuator handling
(1) The actuator can rotate about the rotation axis. Handle it as it rotates.
(2) The actuator does not rotate by more than 90°. Do not apply an excessive force to rotate it more. Otherwise the
terminal is deformed or the actuator is damaged.
(3) Do not pull or hook the actuator. Otherwise damage could be caused. (Only the rotation motion described above is
allowed.)
◆Check of lock
(1) When locking the actuator, make sure that it is parallel to the board face.
(2) After mating and locking FFC, make sure that the FFC positioning tab does not come on the FFC positioning
guide. If the FFC positioning tab runs over the FFC positioning guide, contact failure could be caused.
[Precautions for FFC handling after mating FFC]
◆Load on FFC
When handling FFC, do not apply a load directly to it.
If FFC is bent near the connector when it is used, contact
failure ordisconnection or damage of FFC could be
caused.
In particular, do not bend FFC sharply at the insertion
point to the actuator direction.
[Precautions for pulling FFC]
◆FFC needs to be pulled out with the actuator locked.
To circumvent the FFC positioning guide, pull it out at an angle
of about 7° from the perpendicular direction to the board.
[Other precautions]
◆Precautions for manual soldering
For manual soldering for repair or other purposes, see the followings.
(1) Do not make reflow or manual soldering with FFC inserted in the connector.
(2) Do not apply excessive heat. Prevent a soldering iron from contacting a part other than the lead wire of the
connector. Otherwise the connector may deform or melt.
(3) Do not supply an excessive amount of solder (flux).
If too much solder (flux) is applied on the terminal, a part of the solder or flux would adhere to the contact or
actuator’s rotation axis and cause contact failure or rotation failure of the actuator.
.%
GdiVi^dcVm^h
;;8edh^i^dc^c\\j^YZ
;;8edh^i^dc^c\iVW
Load: 0.05x n N MAX
(n: No. of pos.)
;;8edh^i^dc^c\\j^YZ
,
;;8edh^i^dc^c\iVW
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
FH48-31S-0.5SV FH48-40S-0.5SV FH48-50S-0.5SV FH48-68S-0.5SV FH48-20S-0.5SV FH48-21S-0.5SV