09/2008
69
GENERAL TECHNICAL DATA
Dielectric: polypropylene lm.
Plates: metal foil for 1 section;
metal foil + metallized lm for 2 sections.
Winding: non-inductive type.
Leads: tinned wire.
Protection:polyester tape wrapping and thermosetting resin
end ll.
Marking: manufacturer’s logo, series (1.72), dielectric
code (KP), capacitance, tolerance, D.C. rated
voltage.
Climatic category: 55/105/56 IEC 68-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-13
A72
KP Series
FILM-FOIL POLYPROPYLENE CAPACITOR
HIGH CURRENT APPLICATIONS
Typical applications: switching spikes suppression and
resonant capacitor in SMPS, deection circuits in TV-sets (S-
correction and y-back tuning), applications with high voltage
and high current.
PRODUCT CODE: A72
D max 5 >5 ≤ 7 >7<16 ≥16
Ød ±0.05 0.5 0.6 0.8 1
All dimensions are in mm.
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
A 7 2 -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
E = 100V I = 250V M = 400V
P = 630V Q =1000V S = 1500V U = 2000V
Digit 5 Length (mm):
F=11; H=14; K=20.5; Q=28; T=33
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14).
Standard
packaging style
Ordering code
(Digit 10 to 11)
Reel Ø 355 mm 26
Loose AA
Loose Taped
09/2008 70
A72
KP Series
FILM-FOIL POLYPROPYLENE CAPACITOR
HIGH CURRENT APPLICATIONS
PRODUCT CODE: A72
Rated
Cap.
630Vdc/300Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
0.015 µF 8.5 20.5 4300 5.4 E6 A72PK 2150--0--
0.022 µF 9.5 20.5 4300 5.4 E6 A72PK 2220--0--
0.033 µF 9.0 28.0 2600 3.3 E6 A72PQ 2330--0--
0.047 µF 10.0 28.0 2600 3.3 E6 A72PQ 2470--0--
0.068 µF 11.5 28.0 2600 3.3 E6 A72PQ 2680--0--
0.10 µF 13.5 28.0 2600 3.3 E6 A72PQ 3100--0--
0.15 µF 14.0 33.0 1800 2.3 E6 A72PT 3150--0--
0.22 µF 16.5 33.0 1800 2.3 E6 A72PT 3220--0--
0.33 µF 19.5 33.0 1800 2.3 E6 A72PT 3330--0--
Rated
Cap.
1000Vdc/400Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
3300 pF 8.5 20.5 14000 28.0 E6 A72QK 1330--0--
4700 pF 9.5 20.5 14000 28.0 E6 A72QK 1470--0--
6800 pF 8.0 28.0 5000 10.0 E6 A72QQ 1680--0--
0.010 µF 8.5 28.0 5000 10.0 E6 A72QQ 2100--0--
0.015 µF 10.0 28.0 5000 10.0 E6 A72QQ 2150--0--
0.022 µF 11.0 28.0 5000 10.0 E6 A72QQ 2220--0--
0.033 µF 13.0 28.0 5000 10.0 E6 A72QQ 2330--0--
0.047 µF 14.0 33.0 3700 7.4 E6 A72QT 2470--0--
0.068 µF 16.0 33.0 3700 7.4 E6 A72QT 2680--0--
0.10 µF 19.0 33.0 3700 7.4 E6 A72QT 3100--0--
Rated
Cap.
1500Vdc/450Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
2200 pF 8.0 20.5 17000 51 E6 A72SK 1220--0--
3300 pF 9.5 20.5 17000 51 E6 A72SK 1330--0--
4700 pF 8.5 28.0 6000 18 E6 A72SQ 1470--0--
6800 pF 8.5 28.0 6000 18 E6 A72SQ 1680--0--
0.010 µF 9.5 28.0 6000 18 E6 A72SQ 2100--0--
0.015 µF 11.0 28.0 6000 18 E6 A72SQ 2150--0--
0.022 µF 12.5 28.0 6000 18 E6 A72SQ 2220--0--
0.033 µF 13.5 33.0 4500 13 E6 A72ST 2330--0--
0.047 µF 16.0 33.0 4500 13 E6 A72ST 2470--0--
0.068 µF 18.0 33.0 4500 13 E6 A72ST 2680--0--
Rated
Cap.
2000Vdc/500Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
1000 pF 8.5 20.5 27000 108 E6 A72UK 1100--0--
1500 pF 9.5 20.5 27000 108 E6 A72UK 1150--0--
2200 pF 11.0 20.5 27000 108 E6 A72UK 1220--0--
3300 pF 9.0 28.0 9800 39 E6 A72UQ1330--0--
4700 pF 9.5 28.0 9800 39 E6 A72UQ1470--0--
6800 pF 11.0 28.0 9800 39 E6 A72UQ1680--0--
0.010 µF 13.0 28.0 9800 39 E6 A72UQ2100--0--
0.015 µF 13.5 33.0 7000 28 E6 A72UT 2150--0--
0.022 µF 16.0 33.0 7000 28 E6 A72UT 2220--0--
0.033 µF 20.0 33.0 7000 28 E6 A72UT 2330--0--
0.047 µF 22.5 33.0 7000 28 E6 A72UT 2470--0--
Rated
Cap.
100Vdc/63Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
4700 pF 5.0 11.0 3000 0.60 E6 A72EF1470--0--
6800 pF 5.0 11.0 3000 0.60 E6 A72EF1680--0--
0.010 µF 5.0 11.0 3000 0.60 E6 A72EF2100--0--
Rated
Cap.
250Vdc/125Vac* Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
2200 pF 5.0 11.0 5000 2.50 E6 A72IF 1220--0--
3300 pF 5.0 11.0 5000 2.50 E6 A72IF 1330--0--
4700 pF 7.0 16.5 4500 2.30 E6 A72II 1470--0--
6800 pF 7.0 16.5 4500 2.30 E6 A72II 1680--0--
0.010 µF 7.5 16.5 4500 2.30 E6 A72II 2100--0--
0.015 µF 8.5 16.5 4500 2.30 E6 A72II 2150--0--
Rated
Cap.
400Vdc/160Vac Max
dv/dt
Max K0Part Number
D max L max (V/µs) (V2/µs)
47 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0047--0--
68 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0068--0--
100 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0100--0--
150 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0150--0--
220 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0220--0--
330 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0330--0--
470 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0470--0--
680 pF 5.0 11.0 13000 10.0 E6 A72ΜF 0680--0--
1000 pF 5.0 11.0 13000 10.0 E6 A72ΜF 1100--0--
1500 pF 5.0 11.0 13000 10.0 E6 A72ΜF 1150--0--
2200 pF 6.5 16.5 6500 5.2 E6 A72MI 1220--0--
3300 pF 6.5 16.5 6500 5.2 E6 A72MI 1330--0--
4700 pF 7.0 16.5 6500 5.2 E6 A72MI 1470--0--
6800 pF 8.0 16.5 6500 5.2 E6 A72MI 1680--0--
0.010 µF 9.0 16.5 6500 5.2 E6 A72MI 2100--0--
Note: If the working voltage (V) is lower than the rated voltage (VR), the capacitor may work at higher dv/dt. In this case the maximum value
allowed is obtained multiplying the above value (see table dv/dt) with the ratio VR /V. The dv/dt test is carried out at 2 times the above
values.
The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the value given in the above table.
*Not suitable for across-the-line applications. Please refer to Interference Suppression Capacitors (page 145).
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
polypropylene
lm dielectric
metal foil
1 section
(100-250-400Vdc)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
single sided metallized
polypropylene lm
metal foil
2 sections
(630-1000-1500-2000Vdc)
polypropylene lm dielectric
All dimensions are in mm.
09/2008
71
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤5x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Endurance:
Test conditions
Temperature: +85°C
Test duration: 1000 h
Voltage applied: 1.5xVR
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤5x10-4 at 1kHz
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s±1 s
Performance
Capacitance change |∆C/C|: ≤1%
DF change (∆tgδ): ≤5x10-4 at 1kHz
Insulation resistance: ≥ initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤0.5%
A72
KP Series
FILM-FOIL POLYPROPYLENE CAPACITOR
HIGH CURRENT APPLICATIONS
PRODUCT CODE: A72
ELECTRICAL CHARACTERISTICS
Rated voltage (VR): 100 Vdc - 250 Vdc - 400 Vdc
for 1 section.
630Vdc- 1000Vdc-1500Vdc-2000Vdc
for 2 sections.
Rated temperature (TR): +85°C
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR (d.c.
and a.c.) has to be applied.
Capacitance range: 47pF to 0.015µF for 1 section
1000pF to 0.33µF for 2 sections
Capacitance values:
E6 series (IEC 63 Norm)
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L):
max 1 nH per 1 mm lead and capacitor length.
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
kHz C≤0.1µF >0.1 µF
010
100
≤05
≤10
≤05
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge: 100Vdc
Performance
≥1x105 MΩ (Typ.value: 5x105 MΩ)
Test voltage between terminations:
2xVR applied for 2 s at +25°C±5°C.
09/2008 72
A72
KP Series
FILM-FOIL POLYPROPYLENE CAPACITOR
HIGH CURRENT APPLICATIONS
PRODUCT CODE: A72
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
09/2008
73
A72
KP Series
FILM-FOIL POLYPROPYLENE CAPACITOR
HIGH CURRENT APPLICATIONS
PRODUCT CODE: A72
MAX. CURR
ENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th ≤ 40°C)
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute –
and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.