1-75
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RayBlock 85
Available in: Americas Europe Asia Pacific
■■
Applications
Designed to provide
consistent sealing for cable
bundles and the back of
connectors. The wires are
placed within the channels
of a specially formulated
hot-melt adhesive profile,
then covered by dual-wall,
heat-shrinkable tubing with
a flame-retardant, radiation-
crosslinked outer wall and
hot-melt-adhesive inner
wall. When the tubing is
heated, the hot-melt
adhesive melts and the
tubing shrinks, forcing the
molten adhesive to fill all
the voids within the wire
bundle and tubing. The
result is a solid plug of
adhesive molded around
each wire in the bundle,
creating a moisture-
resistant seal.
Series Raychem
RayBlock 85 RayBlock 85 SCD
RW-2101
Heat-Shrinkable
Water-Blocking System
Product Facts
Environmentally seals wire
bundles of up to 20 wires
Withstands temperature
excursions to 105°C [221°F]
Provides excellent strain
relief and reduces noise
Offers a low-profile installed
product only marginally
larger than the cable bundle
itself
RoHS compliant
Specifications/Approvals
Installation
Minimum shrink
temperature: 80°C [176°F]
Minimum full recovery
temperature: 110°C [230°F]
Operating Temperature Range
-40°C to 85°C
[-40°F to 185°F]
1-76
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RayBlock 85 (Continued)
Product Dimensions Tubing
Part No. of Profile Inside Diameter
No. Channels Minimum Maximum
Outside Length Width Expanded Recovered Nominal
Height as Supplied After Heating Length
RayBlock 85 Kit 0102-A0 2 8.5 [0.335] 2.75 [0.108] 8.50 [0.335] 12.0 [0.472] 3.0 [0.118] 40 [1.57]
RayBlock 85 Kit 0203-A0 3 8.5 [0.335] 2.75 [0.108] 12.25 [0.482] 24.0 [0.945] 6.0 [0.236] 47 [1.85]
RayBlock 85 Kit 0504-A0 4 8.5 [0.335] 2.75 [0.108] 16.00 [0.630] 16.0 [0.630] 4.0 [0.158] 40 [1.57]
RayBlock 85 Kit 0405-A0 5 8.5 [0.335] 2.75 [0.108] 19.75 [0.778] 24.0 [0.945] 6.0 [0.236] 45 [1.77]
RayBlock 85 Kit 0107-A0 7 8.5 [0.335] 2.75 [0.108] 27.25 [1.070] 24.0 [0.945] 6.0 [0.236] 65 [2.56]
RayBlock 85 Kit 0510-A0 10 8.5 [0.335] 2.75 [0.108] 38.50 [1.520] 32.0 [1.260] 8.0 [0.315] 55 [2.17]
Ordering Information Color Standard Black (-0)
Size selection For wire with an outside diameter smaller than 2.8 [0.110] ,
use a maximum of two wires per channel.
For wire with an outside diameter of 2.8–3.5 [0.110 to 0.138],
use a maximum of one wire per channel.
Special order sizes are available upon request.
Standard packaging One kit (contains 1000 pcs. of profile and 1000 pcs. of tubing).
1-77
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RayBlock 105
Available in: Americas Europe Asia Pacific
■■
Applications
Designed to provide
consistent sealing for cable
bundles and the back of
connectors. The wires in the
bundle are placed within
the channels of a specially
formulated hot-melt
adhesive profile, and then
covered by dual wall, heat-
shrinkable tubing with a
flame-retardant radiation-
crosslinked outer wall and
hot-melt-adhesive inner
wall. When the tubing is
heated, the hot-melt
adhesive melts and the
tubing shrinks, forcing the
molten adhesive to fill all
the voids within the wire
bundle and tubing. The
result is a solid plug of
adhesive molded around
each wire in the bundle,
creating a moisture-resist-
ant seal.
Series Raychem
RayBlock 105 RayBlock 105 SCD
RW-2102
Heat-Shrinkable
Water-Blocking System
Product Facts
Environmentally seals wire
bundles of up to 20 wires
Withstands temperature
excursions to 120°C [248°F]
Provides excellent strain
relief and reduces noise
Offers a low-profile installed
product only marginally
larger than the cable bundle
itself
RoHS compliant
Specifications/Approvals
Installation
Minimum shrink
temperature: 80°C [176°F]
Minimum full recovery
temperature: 110°C [230°F]
Operating Temperature Range
-40°C to 105°C
[-40°F to 221°F]
1-78
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RayBlock 105 (Continued)
Product Dimensions Tubing
Part No. of Profile Inside Diameter
No. Channels Minimum Maximum
Outside Length Width Expanded Recovered Nominal
Height as Supplied After Heating Length
RayBlock 105 Kit 0102-A0 2 8.5 [0.335] 2.75 [0.108] 8.50 [0.335] 12.0 [0.472] 3.0 [0.118] 40 [1.57]
RayBlock 105 Kit 0103-A0 3 8.5 [0.335] 2.75 [0.108] 12.25 [0.482] 16.0 [0.630] 4.0 [0.158] 40 [1.57]
RayBlock 105 Kit 0504-A0 4 8.5 [0.335] 2.75 [0.108] 16.00 [0.630] 16.0 [0.630] 4.0 [0.158] 45 [1.77]
RayBlock 105 Kit 0105-A0 5 8.5 [0.335] 2.75 [0.108] 19.75 [0.778] 24.0 [0.945] 6.0 [0.236] 45 [1.77]
RayBlock 105 Kit 0107-A0 7 8.5 [0.335] 2.75 [0.108] 27.20 [1.070] 24.0 [0.945] 6.0 [0.236] 65 [2.56]
RayBlock 105 Kit 0110-A0 10 8.5 [0.335] 2.75 [0.108] 38.50 [1.520] 32.0 [1.260] 8.0 [0.315] 65 [2.56]
Ordering Information Color Standard Black (-0)
Size selection For wire with an outside diameter smaller than 2.8 [0.110], use a maximum of two
wires per channel.
For wire with an outside diameter of 2.8–3.5 [0.110–0.138], use a maximum of one
wire per channel.
Special order sizes are available upon request.
Standard packaging One kit (contains 1000 pcs. of profile and 1000 pcs. of tubing).
1-79
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
Rayrim Edging Material
Available in: Americas Europe Asia Pacific
■■
Applications
Raychem Rayrim edging
material is an extruded strip
internally coated with a heat
activated adhesive, so that
on heating the profile
changes from a "V" to a "U"
section and the adhesive
bonds to the substrate profile.
Manufactured from a
Raychem radiation cross-
linked polyolefin material,
the profile offers a clean
and rapid means of
covering metal, wood and
glass edges for all-round
protection.
The flexible nature of the
product allows application
to both internal and external
radii, as well as straight
edges, and the continuous
operating temperature
of -55°C to +80°C [-67°F
to 176°F] means that the
product can give protection
under the most testing
circumstances.
Series Raychem
Rayrim RK-6182
Commercial Protective,
Self-Adhering, Edging
Material
Product Facts
Flexible to allow for
protection of curved edges
RoHS compliant
Specifications/Approvals
Installation
Minimum shrink
temperature: 120°C [248°F]
Minimum full recovery
temperature: 150°C [302°F]
Operating Temperature Range
-55°C to 80°C
[-67°F to 176°F]
1-80
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
Edging Material (Continued)
Product Dimensions
Size A (maximum) B (minimum) C (minimum) D (minimum) E (typical)
NR6 0.6 [0.024] 0.5 [0.020] 3.5 [0.138] 0.8 [0.032] 1.25 [0.049]
NR7 1.0 [0.039] 0.9 [0.035] 4.8 [0.189] 1.6 [0.063] 1.25 [0.049]
NR8 2.0 [0.079] 0.9 [0.035] 6.6 [0.260] 2.5 [0.098] 2.25 [0.089]
NR9 4.2 [0.165] 0.9 [0.035] 13.5 [0.532] 4.5 [0.177] 2.20 [0.087]
Application Range Plate SWG Thickness Recommended minimum bend radius
30-24 0.31-0.56 [0.012-0.022] 10 [0.394]
23-16 0.61-1.63 [0.026-0.064] 15 [0.591]
15-10 1.83-3.25 [0.072-0.128] 20 [0.787]
9-5 3.66-5.38 [0.144-0.212] 25 [0.984]
Ordering Information Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly on edge of the panel.
Standard packaging 1.2-meter [4-foot] lengths.
Ordering description Specify product name, size number and color (for example, Rayrim-NR6-0).
1-81
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RaySpool
Available in: Americas Europe Asia Pacific
Applications
The RaySpool system offers
a convenient packaging
and dispensing option for a
range of heat-shrinkable
tubings. The tubing is sup-
plied on small reels which
are overboxed and feature
a dispensing window allow-
ing the tubing to be easily
and readily accessed. The
RaySpool system is a suit-
able method of storing and
for use in the workshop,
service vehicle or labora-
tory. A varied selection of
tubings is offered which will
cover a diverse range of
See individual product pages.
applications including elec-
trical insulation, strain relief,
cable bundling and envi-
ronmental protection.
RaySpool packaging is
available for CGPT, LSTT
and CGAT.
Convenient packaging and
dispensing system for heat-
shrinkable tubing
Product Facts
Easy to store
Easy to dispense
Well-suited for repairs
Single wall and adhesive-
lined tubings
Wide variety of colors, sizes
and kits available
Also available are RaySpool
kits comprised of 6 sizes and
supplied with a mounting
rack
Stand alone racks and
packaging sets also
available
RoHS compliant
Installation
See individual product
pages.
Operating Temperature Range
See individual product
pages.
Specifications/Approvals
1-82
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RaySpool (Continued)
Color Standard Black (-0)
Green/yellow (-45) available in sizes indicated by •
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On mini spools.
Ordering description See above for description.
CGPT 2:1
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall
Thickness*
Size Minimum Maximum After Spool Spool Ordering
Expanded Recovered Heating Quantity Quantity Description
as Supplied After Heating - Black - Green/Yellow
(meters) (meters)
1.6/0.8 1.6 (0.062) 0.8 (0.031) 0.45 ± 0.12 10.0 - CGPT-R-1.6-col code
2.4/1.2† 2.4 (0.093) 1.2 (0.046) 0.50 ± 0.12 10.0 - CGPT-R-2.4-col code
3.2/1.6†• 3.2 (0.125) 1.6 (0.062) 0.50 ± 0.12 10.0 5.0 CGPT-R-3.2-col code
4.8/2.4† 4.8 (0.187) 2.4 (0.093) 0.50 ± 0.12 9.0 - CGPT-R-4.8-col code
6.4/3.2†• 6.4 (0.250) 3.2 (0.125) 0.65 ± 0.15 8.0 3.5 CGPT-R-6.4-col code
9.5/4.8• 9.5 (0.375) 4.8 (0.187) 0.65 ± 0.15 6.0 3.0 CGPT-R-9.5-col code
12.7/6.4†• 12.7 (0.500) 6.4 (0.250) 0.65 ± 0.15 6.0 2.5 CGPT-R-12.7-col code
19/9.5• 19.0 (0.748) 9.5 (0.375) 0.75 ± 0.15 5.0 2.0 CGPT-R-19.0-col code
25.4/12.7†• 25.4(1.000) 12.7 (0.500) 0.90 ± 0.20 3.0 1.5 CGPT-R-25.4-col code
KIT CONTAINS SIZES INDICATED BY † CGPT-R-KIT-2
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0) Red (-2) Yellow (-4) Blue (-6)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On mini spools.
Ordering description See above for description
CGPT 3:1
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall
Thickness*
Size Minimum Maximum After Spool Ordering
Expanded Recovered Heating Quantity Description
as Supplied After Heating (meters)
3/1† 3.0 (0.118) 1.0 (0.040) 0.55 ± 0.12 10.0 CGPT-R-3/1-col code
6/2† 6.0 (0.236) 2.0 (0.079) 0.65 ± 0.12 7.0 CGPT-R-6/2-col code
9/3† 9.0 (0.354) 3.0 (0.118) 0.75 ± 0.15 5.0 CGPT-R-9/3-col code
12/4† 12.0 (0.472) 4.0 (0.157) 0.75 ± 0.15 4.0 CGPT-R-12/4-col code
18/6† 18.0 (0.709) 6.0 (0.236) 0.85 ± 0.15 3.0 CGPT-R-18/6-col code
24/8† 24.0 (0.945) 8.0 (0.315) 1.00 ± 0.20 3.0 CGPT-R-24/8-col code
KIT CONTAINS SIZES INDICATED BY † (black only) CGPT-R-KIT-1
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
1-83
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RaySpool (Continued)
LSTT 2:1
Product Dimensions
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On mini spools.
Ordering description See above for description
CGAT 3:1
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall
Thickness*
Size Minimum Maximum After Spool Ordering
Expanded Recovered Heating Quantity Description
as Supplied After Heating (meters)
3/1† 3.0 (0.118) 1.0 (0.040) 1.00 ± 0.25 5.0 CGAT-R-3/1-0
6/2† 6.0 (0.236) 2.0 (0.079) 1.00 ± 0.25 3.5 CGAT-R-6/2-0
9/3† 9.0 (0.354) 3.0 (0.118) 1.35 ± 0.25 3.0 CGAT-R-9/3-0
12/4† 12.0 (0.472) 4.0 (0.157) 1.50 ± 0.25 2.5 CGAT-R-12/4-0
18/6† 18.0 (0.709) 6.0 (0.236) 1.70 ± 0.25 2.0 CGAT-R-18/6-0
24/8† 24.0 (0.945) 8.0 (0.315) 1.90 ± 0.25 1.5 CGAT-R-24/8-0
KIT CONTAINS SIZES INDICATED BY † (black only) CGAT-R-KIT-1
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Standard packaging On mini spools.
Ordering description See above for description
Ordering Information
Inside Diameter Recovered Wall
Thickness*
Size Minimum Maximum After Spool Ordering
Expanded Recovered Heating Quantity Description
as Supplied After Heating - Black (meters)
2.4/1.2† 2.4 (0.093) 1.2 (0.046) 0.55 ± 0.12 10.0 LSTT-R-2.4-0
3.2/1.6† 3.2 (0.125) 1.6 (0.062) 0.55 ± 0.12 10.0 LSTT-R-3.2-0
4.8/2.4† 4.8 (0.187) 2.4 (0.093) 0.55 ± 0.12 9.0 LSTT-R-4.8-0
6.4/3.2† 6.4 (0.250) 3.2 (0.125) 0.65 ± 0.15 8.0 LSTT-R-6.4-0
9.5/4.8 9.5 (0.375) 4.8 (0.187) 0.65 ± 0.15 6.0 LSTT-R-9.5-0
12.7/6.4† 12.7 (0.500) 6.4 (0.250) 0.65 ± 0.15 6.0 LSTT-R-12.7-0
19/9.5 19.0 (0.748) 9.5 (0.375) 0.80 ± 0.15 5.0 LSTT-R-19.0-0
25.4/12.7† 25.4(1.000) 12.7 (0.500) 0.95 ± 0.18 3.0 LSTT-R-25.4-0
KIT CONTAINS SIZES INDICATED BY † (black only) LSTT-R-KIT-1
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
1-84
Engineering Notes
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
1-85
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RHW
Available in: Americas Europe Asia Pacific
■■
Series UL Raychem
RHW Approval pending RHW SCD
Rugged, Heavy Wall,
Adhesive-Lined, Polyolefin
Heat-Shrinkable Tubing
Product Facts
Withstands mechanical
abuse for increased product
reliability
Highly resistant to impact
and abrasion
Provides high level of strain
relief when installed on
splices and joints
Resistant to chemicals,
moisture and oils
Provides a complete
moisture-proof seal
preventing corrosion of
underlying components
RoHS compliant
Specifications/Approvals
Applications
Rugged, heavy wall RHW
tubing is specifically
designed for insulating,
protecting and sealing
electrical connections and
joints in low-voltage cables.
The material used is both
halogen-free and UV
resistant. It provides splice
insulation thickness equal
to or greater than standard
wire insulation manufactured
to common industry
standards.
RHW is a suitable choice
for applications where
maximum reliability, product
performance and simplified
insulation are required.
Because RHW is heat-
shrinkable, a minimum
number of sizes are needed
to cover a wide range of
cables and splice
diameters. This product is
only available with a
co-extruded layer of hot
melt adhesive coating.
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 125°C [257°F]
Operating Temperature Range
-55°C to 110°C
[-67°F to 230°F]
1-86
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RHW (Continued)
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes available upon request.
Standard packaging 1000mm and 1500mm lengths.
Marking Tubing will be marked with product name, size and batch number.
Ordering description Specify product name, size, cut length (for example, RHW-12/3-1000/ADH-0).
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered Minimum
as Supplied After Heating Jacket Wall
12/3 12 [0.472] 3 [0.118] 2.0 [0.079]
16/4 16 [0.630] 4 [0.158] 2.4 [0.095]
24/6 24 [0.945] 6 [0.236] 2.7 [0.106]
34/8 33 [1.299] 8 [0.315] 4.0 [0.157]
48/12 48 [1.890] 12 [0.472] 4.5 [0.177]
56/16 56 [2.205] 16 [0.630] 4.4 [0.173]
70/20 70 [2.756] 20 [0.787] 4.4 [0.173]
90/25 90 [3.543] 25 [0.984] 4.3 [0.169]
110/30 110 [7.331] 30 [1.181] 4.3 [0.169]
130/55 130 [5.118] 35 [1.378] 4.3 [0.169]
160/50 160 [6.229] 50 [1.968] 4.3 [0.169]
180/50 180 [7.087] 50 [1.968] 4.3 [0.169]
200/50 200 [7.874] 50 [1.968] 4.3 [0.169]
250/65 250 [9.842] 65 [2.559] 4.3 [0.169]
320/95 320 [12.598] 95 [3.740] 4.3 [0.169]
390/110 390 [15.354] 110 [4.331] 4.3 [0.169]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
1-87
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RMW
Medium Wall, Polyolefin
Heat-Shrinkable Tubing
Product Facts
Withstands mechanical
abuse for increased product
reliability
Highly resistant to impact
and abrasion
Installation is fast and easy
Resistant to chemicals and
moisture
Adhesive-lined version
provides a complete
moisture-proof seal
preventing corrosion of
underlying components
RoHS compliant
Applications
Medium wall, general
purpose RMW tubing is
specifically designed for
use in a broad range of
low-voltage applications.
RMW is tough and flexible,
making it particularly suited
for the insulation and
protection of cable joints as
well as for cable repair. The
outside jacket material used
is both halogen-free and
UV resistant. Uncoated
RMW provides insulation
and strain relief.
Adhesive-lined RMW also
provides an environmental
seal. RMW is a suitable
choice for applications
where maximum reliability
and product performance,
and simplified installation
are required. Because
RMW is heat-shrinkable, a
minimum number of sizes
are needed to cover a wide
range of cables and splice
diameters.
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 125°C [257°F]
Operating Temperature Range
-55°C to 110°C
[-67°F to 230°F]
Specifications/Approvals Series Raychem
RMW RMW SCD
Available in: Americas Europe Asia Pacific
■■
1-88
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RMW (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered Minimum
as Supplied After Heating Jacket Wall
10/3 10 [0.394] 3 [0.118] 1.0 [0.039]
16/5 16 [0.630] 5 [0.197] 1.4 [0.055]
25/8 25 [0.984] 8 [0.315] 2.0 [0.079]
35/12 35 [1.378] 12 [0.472] 2.0 [0.079]
50/16 50 [1.968] 16 [0.630] 2.0 [0.079]
63/19 63 [2.480] 19 [0.748] 2.4 [0.095]
75/22 75 [2.953] 22 [0.866] 2.7 [0.106]
85/25 85 [3.346] 25 [0.984] 2.8 [0.110]
95/29 95 [3.740] 29 [1.142] 3.1 [0.122]
115/34 115 [4.528] 34 [1.339] 3.1 [0.122]
140/42 140 [5.112] 42 [1.654] 3.1 [0.122]
160/50 160 [6.299] 50 [1.968] 3.2 [0.126]
180/60 180 [7.087] 60 [2.362] 3.2 [0.126]
245/80* 245 [9.646] 80 [3.150] 2.4 [0.095]
285/135 285 [11.220] 135 [5.315] 1.4 [0.055]
*Uncoated only
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes available upon request.
Standard packaging 1000mm and 1500mm lengths.
Marking Tubing will be marked with product name, size and batch number.
Ordering description Specify product name, size, cut length, coating option (for example, RMW-10/3-1000/U-0;
ADH = Adhesive-line, U = Uncoated).
1-89
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RNF-100
Flexible, Flame-Retardant,
General Purpose,
Polyolefin Tubing
Product Facts
2:1 shrink ratio
Superior abrasion and
solvent resistance when
compared with that of many
flexible, general purpose
polyolefin tubings
Excellent physical,
chemical, and electrical
properties that meet or
exceed industrial and
military standards for highly
reliable, general purpose
tubing
Flexible; conforms to
irregular shapes
Flame-retardant (colors
only)
Wide range of sizes and
colors
RoHS compliant Installation
Minimum shrink
temperature: 95°C [203°F]
Minimum full recovery
temperature: 121°C [250°F]
Operating Temperature Range
-55°C to 135°C
[-67°F to 275°F]
Specifications/Approvals
Applications
Designed to provide superior
mechanical (abrasion, cut-
through, and strain relief),
thermal, and fluid-resistance
performance in demanding
environments. Widely used
to provide insulation and
strain relief of wire termina-
tions and connections. Used
for jacketing wire bundles
and light-duty harnesses
where superior abrasion
resistance is a plus. Also
used to identify and color-
code electrical connections
and wire bundles.
Available in: Americas Europe Asia Pacific
■■
Series UL CSA Military Industry Raychem
RNF-100 Type 1 E35586 LR31929 AMS-DTL-23053/5*, VDE 0341 Pt 9005 RT-350, Type 1
(colors) 600 V, 125°C 600 V, 125°C Class 1 Type A and B RK-6001
Def. Stan. 59-97 Type 2B
RNF-100 Type 2 AMS-DTL-23053/5*, RT-350, Type 2
(clear) ——Class 2 RK-6001
VG 95343 Pt 5 Type B
*Formerly MIL-I-23053/5 and MIL-DTL-23053/5.
®
1-90
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RNF-100 (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered After Heating
as Supplied After Heating
3/64 1.2 [0.046] 0.6 [0.023] 0.40 ± 0.08 [0.016 ± 0.003]
1/16 1.6 [0.063] 0.8 [0.031] 0.43 ± 0.08 [0.017 ± 0.003]
3/32 2.4 [0.093] 1.2 [0.046] 0.51 ± 0.08 [0.020 ± 0.003]
1/8 3.2 [0.125] 1.6 [0.062] 0.51 ± 0.08 [0.020 ± 0.003]
3/16 4.8 [0.187] 2.4 [0.093] 0.51 ± 0.08 [0.020 ± 0.003]
1/4 6.4 [0.250] 3.2 [0.125] 0.64 ± 0.08 [0.025 ± 0.003]
3/8 9.5 [0.375] 4.8 [0.187] 0.64 ± 0.08 [0.025 ± 0.003]
1/2 12.7 [0.500] 6.4 [0.250] 0.64 ± 0.08 [0.025 ± 0.003]
3/4 19.1 [0.750] 9.5 [0.375] 0.76 ± 0.08 [0.030 ± 0.003]
1 25.4 [1.000] 12.7 [0.500] 0.89 ± 0.12 [0.035 ± 0.005]
1 1/4 31.8 [1.250] 15.9 [0.625] 1.02 ± 0.15 [0.040 ± 0.006]
1 1/2 38.1 [1.500] 19.1 [0.750] 1.02 ± 0.15 [0.040 ± 0.006]
2 50.8 [2.000] 25.4 [1.000] 1.14 ± 0.16 [0.045 ± 0.007]
3 76.2 [3.000] 38.1 [1.500] 1.27 ± 0.20 [0.050 ± 0.008]
4101.6 [4.000] 50.8 [2.000] 1.40 ± 0.23 [0.055 ± 0.009]
5127.0 [5.000] 63.5 [2.500] 1.52 ± 0.23 [0.060 ± 0.009]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0, BK), white (-9, WH), red (-2, RD), blue (-6, BU),
yellow (-4, YO), clear (-X, CL)
Nonstandard Brown (-1, BN), orange (-3, OR), green (-5, GN),
violet (-7, VT), gray (-8, GY)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging*** On spools or in 1.2-meter [4-foot] lengths.
Ordering description**** Specify product name, size and color (for example, RNF-100 1/4-0 [Europe]
or RNF-100 1/4-BK [Americas].
***Available in the convenient Mini-Spool packaging/dispensing system, for sizes 3/64” up to 1”.
****Europe only. For supply to MIL, Def Stan and BS add -MS, -DS or -BS to ordering description.
1-91
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RNF-150
High-Performance,
Flame-Resistant, Flexible,
Fluoropolymer Tubing
Product Facts
2:1 shrink ratio
Approximately 40 percent
thinner walls than most
general purpose polyolefin
tubings
High flame-resistance
Excellent physical and
electrical properties after
exposure to many chemicals
and solvents at 50°C [122°F]
(but not recommended for
use in direct contact with
ketones)
Recommended maximum
temperature for use as a
primary insulator: 135°C
[275°F]
RoHS compliant
Installation
Minimum shrink
temperature: 110°C [230°F]
Minimum full recovery
temperature: 150°C [302°F]
Operating Temperature Range
-55°C to 150°C
[-67°F to 302°F]
Specifications/Approvals
Applications
Can be used for jacketing
and bundling of wires to
form light-duty harnesses,
especially where a low
profile, abrasion resistance,
and flexibility are needed.
Can also be used to
provide insulation and
strain relief of electrical
connections and wire
terminations, identification
of wires, and packaging of
components.
Available in: Americas Europe Asia Pacific
■■
Series UL Military Raychem
RNF-150 E35586 VW-1 AMS-DTL-23053/18*, RT-370
600 V, 150°C Class 2
*Formerly MIL-I-23053/18 and MIL-DTL-23053/18.
1-92
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RNF-150 (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness**
Size Minimum Expanded Maximum Recovered After Heating
as Supplied After Heating
3/64 1.2 [0.046] 0.6 [0.023] 0.25 ± 0.05 [0.010 ± 0.002]
1/16 1.6 [0.063] 0.8 [0.031] 0.25 ± 0.05 [0.010 ± 0.002]
3/32 2.4 [0.093] 1.2 [0.046] 0.25 ± 0.05 [0.010 ± 0.002]
1/8 3.2 [0.125] 1.6 [0.062] 0.25 ± 0.05 [0.010 ± 0.002]
3/16 4.8 [0.187] 2.4 [0.093] 0.25 ± 0.05 [0.010 ± 0.002]
1/4 6.4 [0.250] 3.2 [0.125] 0.30 ± 0.08 [0.012 ± 0.003]
3/8 9.5 [0.375] 4.8 [0.187] 0.30 ± 0.08 [0.012 ± 0.003]
1/2 12.7 [0.500] 6.4 [0.250] 0.30 ± 0.08 [0.012 ± 0.003]
3/4 19.1 [0.750] 9.5 [0.375] 0.43 ± 0.08 [0.017 ± 0.003]
1 25.4 [1.000] 12.7 [0.500] 0.48 ± 0.08 [0.019 ± 0.003]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard Black (-0)
Nonstandard White (-9)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging On spools.
Ordering description*** Specify product name, size and color (for example, RNF-150 1/4-0).
***Europe only. For supply to MIL, Def Stan and BS add -MS, -DS or -BS to ordering description.
1-93
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RNF-3000
Flexible, High-Shrink-
Ratio, Flame-Retardant,
General Purpose,
Polyolefin Tubing
Product Facts
3:1 shrink ratio easily
accommodates awkward,
irregular shapes
Few sizes cover a wide
range of diameters, allowing
reduced inventory
Excellent physical,
chemical, and electrical
properties meet industry
standards for highly
reliable, general purpose
tubing
Flame-retardant (colors
only)
RoHS compliant
Installation
Minimum shrink
temperature: 80°C [176°F]
Minimum full recovery
temperature: 120°C [248°F]
Operating Temperature Range
-55°C to 135°C
[-67°F to 275°F]
Specifications/Approvals
Applications
Used for insulation
and strain relief of wire
terminations and electrical
connections. Also suitable
for light-duty harnessing,
jacketing, and identification
of wires, cables, and
electrical and electronic
components.
Available in: Americas Europe Asia Pacific
■■
Series UL CSA Military Industry Raychem
RNF-3000 E35586 LR31929 Def. Stan. 59-97 Type 2B VDE 0341 Pt 9005 RW-2053
600 V, 125°C 600 V, 125°C VG 95343 Pt 5 Type A (color) Type A and B
VG 95343 Pt 5 Type B (clear)
®
1-94
RAYCHEM Tubing Products
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RNF-3000 (Continued)
Product Dimensions
Ordering Information
Inside Diameter Recovered Wall Thickness*
Size Minimum Expanded Maximum Recovered After Heating
as Supplied After Heating
1.5/0.5 1.5 [0.060] 0.5 [0.019] 0.45 ± 0.10 [0.018 ± 0.003]
3/1 3 [0.118] 1 [0.039] 0.55 ± 0.10 [0.022 ± 0.003]
4.5/1.5 4.5 [0.177] 1.5 [0.059] 0.55 ± 0.10 [0.022 ± 0.003]
6/2 6 [0.236] 2 [0.079] 0.65 ± 0.10 [0.026 ± 0.003]
9/3 9 [0.354] 3 [0.118] 0.75 ± 0.12 [0.030 ± 0.004]
12/4 12 [0.472] 4 [0.157] 0.75 ± 0.12 [0.030 ± 0.004]
18/6 18 [0.709] 6 [0.236] 0.85 ± 0.12 [0.033 ± 0.004]
24/8 24 [0.944] 8 [0.315] 1.00 ± 0.18 [0.039 ± 0.007]
39/13 39 [1.534] 13 [0.512] 1.15 ± 0.20 [0.045 ± 0.008]
*Wall thickness will be less if tubing recovery is restricted during shrinkage.
Color Standard** Black (-0),
white (-9), red (-2), blue (-6), yellow (-4), clear (-X)
Nonstandard Brown (-1), orange (-3), green (-5), violet (-7), gray (-8)
Size selection Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
Standard packaging*** On spools or in 1.2-meter [4-foot] lengths.
Ordering description**** Specify product name, size and color (for example, RNF-3000 6/2-0).
**Black is the only standard color in the Americas. All other colors are nonstandard.
***Only spools are standard in the Americas. 1.2 meter [4-foot] lengths are nonstandard.
****Europe only. For supply to Def Stan and BS add -DS or -BS to ordering description.
1-95
9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999
CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015
specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013
te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666
RAYCHEM Tubing Products
1
Heat-shrinkable Tubing
RP-4800
High-Shrink-Ratio,
Flame-Retardant,
Polyolefin Tubing
Product Facts
4:1 shrink ratio
Conforms well to highly
variable substrate
dimensions
Has excellent physical,
chemical, and electrical
properties that meet or
exceed industrial and
military standards
Shows no significant
degradation when exposed
to common solvents and
chemicals, including
aviation fuel and hydraulic
fluid
RoHS compliant
Installation
Minimum shrink
temperature: 95°C [203°F]
Minimum full recovery
temperature: 121°C [250°F]
Operating Temperature Range
-55°C to 135°C
[-67°F to 275°F]
Specifications/Approvals
Applications
Well-suited for repairing
harnesses or cables; will
pass over a large-diameter
connector or transition, and
then shrink down onto a
smaller-diameter jacket.
Can insulate or protect a
substrate of varying
dimensions. Also provides
the abrasion and fluid
resistance required in
harnessing applications.
Available in: Americas Europe Asia Pacific
■■
Series UL Military Industry Raychem
RP-4800 E35586 AMS-DTL-23053/5*, VDE 0341 Pt 9005 Type A RT-1122
600V, 125°C Class 1 Overexpanded
(black only) VG 95343 Pt 5 Type A
*Formerly MIL-I-23053/5 and MIL-DTL-23053/5.