Static Shielding Bag 1000 Series This transparent metal-in static shielding bag is designed to provide a static safe environment for sensitive electronic devices. Bags are printed with an ESD protective symbol and a lot code for traceability. Open top (1000) and ZipTop (3000) styles are available. The bags are heat sealable. Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static Control Bag ANSI/ESD S11.4 Level 3 SCS Static Shielding Bags 1000 are manufactured from a polyester, metal, polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded. Open TopBag Bag Open Top ZipTop Bag ZipTop Bag Tolerance (inches): Width -0, +0.250 Length 0.125 Offset O to 0.250 Tolerance: Width -0, +1/4" Note: +/Standard bag markings shown above and SealOffset width0+/0.125 Length +/- 1/8" to 1/4" are not to scale. Seal width 3/8" with a tolerance of +/- 1/8" Physical Typical Value Testing Method Tensile Strength 4600 PSI, 32 MPa ASTM D882 Puncture Resistance 12 lbs, 53 N MIL-STD-3010C Method 2065 Seal Strength 11 lbs, 48 N ASTM D882 Thickness 2.8 mils, 0.071 mm +/-10% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Transparency 40% Tobias Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 Surface Resistance Interior 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Surface Resistance Exterior < 1 x 1011 ohms ANSI/ESD STM11.11 Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 300F - 375F, 149C - 190C Time 0.5 - 3.5 seconds Pressure 30 - 70 PSI, 206 - 482 KPa Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. RoHS 2, REACH, and Conflict Minerals Statement None of the RoHS 2 restricted materials or REACH substances of very high concern as of 2014/12/17, or Conflict Minerals are intentionally added in manufacturing this product. Ref: European Union Directive 2011/65/EU and Regulation (EC) No. 1907/2006/CE. See SCS Warranty, Limitation of Liability and Remedies 1000 SERIES STATIC SHIELDING BAG 926 JR Industrial Drive, Sanford, NC 27332 WEB SITE: StaticControl.com PHONE (919) 718-0000 (c) 2015 DESCO INDUSTRIES INC. Employee Owned Made in the United States of America Specifications and procedures subject to change without notice. DRAWING NUMBER 1000 Series DATE June 2015