
Specifications Subject To Change Without Notice www.ottoexcellence.com 140
ROCKER SWITCHES
The K series rockers are rugged, high performance sealed
switches designed for use under severe conditions found in
marine, appliance, heavy equipment and industrial control
applications. Sealed to IP68S with an optional panel gasket
available.
The K1 series is offered in single pole configuration while the
K2 series is available in single and double pole configurations.
Both series offer illuminated models. Illumination can be
independent or dependent of the switch position or a
combination of both. A choice of red, green, clear or amber
colored lenses are offered in illuminated models. Illumination
options include incandescent, LED or neon light sources.
Mounting is simple and quick; snaps into panel from the
front. The OTTO snap-in design supports a variety of panel
thicknesses with just one cutout size specified.
A choice of models are offered to handle power levels to 16 amps,
1/2 HP and low level electronic switching applications.
OTTO can provide custom colors upon request. Value-added
assemblies with wire leads are also available. Please consult
the factory for assistance.
Features:
• Withstandsdirectwaterspray
• WatertighttoIP68S
• Fitsindustrystandardpanelopeningsfordrop-in
replacementofpanelsealed&unsealedswitches
• Snap-infeatureaccommodatesawiderangeof
panelcutouts
• Switchesupto16amps
• UV&solventresistant
• Withstandsextremeshock&vibration
• Customlegendsavailable
• 2&3-position,momentary&maintainedaction
• Incandescent,LED&neonilluminationwith
independent&dependentlightsourceoptions
• ULrecognized&CSAcertified
• Ignitionprotected
• RoHS/WEEE/Reachcompliant
StandardCharacteristics/Ratings:
ELECTRICALRATINGS:
Load SeaLevel@28VDC Cycles
or125/250VAC,60Hz
Resistive 16A 25,000
Resistive 10A 50,000
Inductive 10A 25,000
Lamp 5A 25,000
Motor 0.5HP 25,000
DWV 1050Vrms except across light terminals
Low Level 10mA @ 30mV
ElectricalLife: See Rating Chart
LIGHTING:
LightSource Rating
Incandescent (VDC) 6V, 12V, 24V
Neon (VAC) 125V, 250V
LED (VDC) 2V, 6V, 12V, 24V
MechanicalLife: 100,000 cycles
Seal: IP68S
OperatingTempRange: -30°C to +85°C
MATERIALS:
Case: Thermoplastic
Button: Thermoplastic
Base: Thermoplastic
Terminals/Contact: Brass, silver alloy with silver plate, gold flash for low level
TerminalHardware: Screws and lockwashers provided when applicable
K1/K2 series recommended Quick Connect terminals:
AMP 60253-2 for 12-16 AWG
AMP 42100-2 for 14-18 AWG
MountingHardware: None provided
SEALED, ILLUMINATED ROCKER SWITCHES SNAP-IN
ROCKERS
K1/K2
LOW COST, SNAP-IN ROCKER FOR WET & DUSTY ENVIRONMENTS
K1 Series
Single Pole
K2 Series
Single & Double Pole