CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New! @Super low ESR, high ripple current capability @ESR 5mO max. (2.5Vdc) @Longer life (5,000 hours at 105C) @ESR after endurance is specified within the initial spec (2.5Vdc) @Rated voltage range : 2.5 to 16Vdc @RoHS Compliant @Halogen Free (Ask Engineering Bulletin No797 in detail) PSF Lower ESR PSE ?SPECIFICATIONS Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Characteristics -55 to +105C *Note 2.5 to 16Vdc P20% (M) Rated voltage(V)B1.15 I=0.2CV or 500MA, whichever is greater Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) Dissipation Factor (tane) 0.10 max. Low Temperature Characteristics (Max.Impedance Ratio) Z(-25C)/Z(+20C)[1.15 Z(-55C)/Z(+20C)[1.25 Endurance Bias Humidity Test Surge Voltage Test Failure Rate (at 20C, 120Hz) (at 105C) (at 20C after 2 minutes) (at 20C, 120Hz) (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR 2.5Vdc : [The initial specified value 16Vdc : [150% of the initial specified value Leakage current [The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR 2.5Vdc : [The initial specified value 16Vdc : [150% of the initial specified value Leakage current [The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change [P20% of the initial value D.F. (tanE) [The initial specified value ESR 2.5Vdc : [The initial specified value 16Vdc : [150% of the initial specified value Leakage current [The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. ?DIMENSIONS [mm] FD' Fd Coated Case FP0.5 FP0.5 @Terminal Code : E (F08) L' 15min. (FA5 to JB5) Size code FA5 HB5 JB5 F08 fD 8.0 10.0 6.3 fd 0.5 0.6 0.6 F 3.5 5.0 2.5 fD' FD+0.5max. L' L+1.0max. L+0.3max. L+1.5max. ?MARKING EX) 2.5V560MF F 6D6 560 2.5V 4min. (1/2) CAT. No. E1001I CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New! ?PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PS F 2 R 5 E AA 5 6 1 M F 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560MF:561) Lead forming*Taping code Terminal code Voltage code (ex. 2.5V:2R5, 16V:160) Series code Category Please refer to "Product code guide (conductive polymer type)" ?STANDARD RATINGS WV(Vdc) 2.5 16 Cap(mF) 330 470 560 100 270 470 Case size fDbL(mm) ESR (mo max./20c, 100k to 300kHz) 6.3B8 6.3B8 6.3B8 6.3B10.5 8B11.5 10B11.5 5 5 5 25 11 10 Rated ripple current (mArms/105c, 100kHz) 5,900 5,900 5,900 2,820 5,080 6,100 Part No. APSF2R5ESS331MF08S APSF2R5ESS471MF08S APSF2R5ESS561MF08S APSF160ESS101MFA5S APSF160ESS271MHB5S APSF160ESS471MJB5S SS : Enter the appropriate lead forming or taping code. (2/2) CAT. No. E1001I