CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
CAT. No. E1001I
@Super low ESR, high ripple current capability
@ESR 5mO max. (2.5Vdc)
@Longer life (5,000 hours at 105C)
@ESR after endurance is speciļ¬ ed within the initial spec (2.5Vdc)
@Rated voltage range : 2.5 to 16Vdc
@RoHS Compliant
@Halogen Free (Ask Engineering Bulletin No797 in detail)
?SPECIFICATIONS
(at 20C, 120Hz)
(at 105C)
(at 20C after 2 minutes)
(at 20C, 120Hz)
(at 100kHz)
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Surge Voltage
Leakage Current
*Note
Dissipation Factor
(tane)
Low Temperature
Characteristics
(Max.Impedance Ratio)
Endurance
Bias Humidity Test
Surge Voltage Test
Failure Rate
Items
-
55 to +105C
2.5 to 16Vdc
P20% (M)
Rated voltage(V)B1.15
I=0.2CV or 500MA, whichever is greater
Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V)
0.10 max.
Z(
-
25C)/Z(+20C)[1.15
Z(
-
55C)/Z(+20C)[1.25
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours
at 105C.
Appearance No significant damage
Capacitance change [P20% of the initial value
D.F. (tanE)[The initial specified value
ESR 2.5Vdc : [The initial specified value
16Vdc : [150% of the initial specified value
Leakage current [The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change [P20% of the initial value
D.F. (tanE)[The initial specified value
ESR 2.5Vdc : [The initial specified value
16Vdc : [150% of the initial specified value
Leakage current [The initial specified value
The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds
through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change [P20% of the initial value
D.F. (tanE)[The initial specified value
ESR 2.5Vdc : [The initial specified value
16Vdc : [150% of the initial specified value
Leakage current [The initial specified value
0.5% per 1,000 hours maximum (Confidence level 60% at 105C)
Characteristics
?DIMENSIONS [mm]
?MARKING
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C.
Size code
fD
fd
F
fD'
L'
F08
0.6
L+1.0max.
6.3
2.5
FD+0.5max.
0.6
L+1.5max.
FA5
0.5
L+0.3max.
HB5
8.0
3.5
JB5
10.0
5.0
Coated Case
L'
15min. 4min.
FD'
Fd
FP0.5
(FA5 to JB5)(F08)
FP0.5
F
6D6
560
2.5V
EX) 2.5V560MF
@Terminal Code : E
New!
Lower ESR
PSF
PSE
(1/2)
CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
CAT. No. E1001I
?PART NUMBERING SYSTEM
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 560MF:561)
Lead formingĀ·Taping code
Terminal code
Voltage code (ex. 2.5V:2R5, 16V:160)
Series code
Category
A P S F 2 R 5 EA A 5 6 1 F 0 8 SM
13426789105121311 16 17 181514
?STANDARD RATINGS
SS : Enter the appropriate lead forming or taping code.
New!
Please refer to "Product code guide (conductive polymer type)"
WV(Vdc) Cap(mF) Case size
fDbL(mm) ESR
(mo max./20c, 100k to 300kHz) Rated ripple current
(mArms/105c, 100kHz) Part No.
2.5 330 6.3B8 5 5,900 APSF2R5ESS331MF08S
470 6.3B8 5 5,900 APSF2R5ESS471MF08S
560 6.3B8 5 5,900 APSF2R5ESS561MF08S
16 100 6.3B10.5 25 2,820 APSF160ESS101MFA5S
270 8B11.5 11 5,080 APSF160ESS271MHB5S
470 10B11.5 10 6,100 APSF160ESS471MJB5S
(2/2)
