https://www.phoenixcontact.com/us/products/1424658 Connector - SACC-MS-5PL SH SCO - 1424658 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, 5-position, shielded, Plug straight M12 SPEEDCON, A-coded, Spring-cage connection, Knurl material: Zinc die-cast, nickel-plated, External cable diameter 4 mm ... 8 mm Why buy this product Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Save time, thanks to installation with SPEEDCON fast locking system Spring-cage connection: connect more securely, even in the case of shock and vibration, thanks to high contact forces Reliable signal transmission - 360 shielding in environments with electromagnetic interference Easy tool free wiring with the push-in connection Quick and easy installation, thanks to Push-in connection technology Key Commercial Data Packing unit 1 GTIN GTIN 4055626375854 Technical data Dimensions External cable diameter 4 mm ... 8 mm Stripping length of the sheath 29 mm Stripping length of the individual wire 8 mm Ambient conditions Ambient temperature (operation) -40 C ... 85 C (Plug / socket) Degree of protection IP65 04/10/2017 Page 1 / 4 https://www.phoenixcontact.com/us/products/1424658 Connector - SACC-MS-5PL SH SCO - 1424658 Technical data Ambient conditions IP67 General Rated current at 40C 4A Rated voltage 60 V DC 48 V AC Number of positions 5 Insulation resistance 100 M Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Shock, vibration EN 50155:2001 Status display No Overvoltage category II Degree of pollution 3 Connection method Spring-cage connection Conductor cross section 0.14 mm ... 0.75 mm 0.08 mm ... 0.5 mm (with ferrule) Conductor cross section AWG 26 ... 18 28 ... 20 (with ferrule) Insertion/withdrawal cycles 100 Torque 0.4 Nm (M12 knurl) 0.8 Nm (Connector with coupling sleeve) 3 Nm (Pressure nut with coupling sleeve) Assembly instructions The wires can be connected both with ferrules and without ferrules Material Flammability rating according to UL 94 V0 Contact material CuSn Contact surface material Ni/Au Contact carrier material PA 6.6 Material of grip body Zinc die-cast, nickel-plated Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Shock, vibration EN 50155:2001 Standards and Regulations 04/10/2017 Page 2 / 4 https://www.phoenixcontact.com/us/products/1424658 Connector - SACC-MS-5PL SH SCO - 1424658 Technical data Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Standard designation Shock, vibration Standards/regulations EN 50155:2001 Flammability rating according to UL 94 V0 Drawings Schematic diagram 4 Functional drawing 29 3 1 8 12 5 2 O 4 - 8 mm Pin assignment M12 male connector, 5-pos., Acoded, male side 0,14 - 0,75 mm 1208445 16 1212597 0,8 Nm 13 16 3 Nm Dimensional drawing O19 M12 ca. 61 16 13 M12 SPEEDCON plug, straight, shielded Approvals Approvals 04/10/2017 Page 3 / 4 https://www.phoenixcontact.com/us/products/1424658 Connector - SACC-MS-5PL SH SCO - 1424658 Approvals Approvals EAC Ex Approvals Approval details EAC EAC-Zulassung Phoenix Contact 2017 (c) - all rights reserved http://www.phoenixcontact.com 04/10/2017 Page 4 / 4