IFX1050G High Speed CAN-Transceiver Data Sheet Rev. 1.0, 2009-05-14 Standard Products IFX1050G Table of Contents Table of Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 3.1 3.2 Pin Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin Definitions and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 4.1 4.2 4.3 Operation Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Normal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stand - By Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Receive - Only Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 6 6 5 5.1 5.2 5.3 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Functional Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Thermal Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 7 7 6 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 7 7.1 Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Further Application Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 8 Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 9 Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Data Sheet 2 Rev. 1.0, 2009-05-14 High Speed CAN-Transceiver 1 IFX1050G Overview Features * * * * * * * * CAN data transmission rates from 1 kBaud up to 1 MBaud Receive - Only Mode and Stand - By Mode Optimized Electromagnetic Compatibility (EMC) Optimized for a high immunity against Electromagnetic Interference (EMI) Bus pins are short circuit proof Over - temperature protection Very wide temperature range (-40 C up to 125 C) Green Product (RoHS compliant) PG-DSO-8 Description The IFX1050G is optimized for high speed differential mode data transmission in industrial applications and it is compliant to ISO11898-2. The transceiver IFX1050G works as an interface between the CAN protocol controller and the physical differential bus in High Speed CAN applications. It supports data transmission rates from 1 kBaud up to 1 MBaud. The IFX1050G has three different operation modes: The Normal Mode, the Receive - Only Mode and the Stand - By Mode. The mode selection is controlled by the logical input pins RM and INH. The IC is based on the Smart Power Technology SPT(R) which allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit. The IFX1050G is designed to withstand the severe conditions in industrial applications and provides excellent EMC performance within a broad frequency range. Type Package Marking IFX1050G PG-DSO-8 IFX1050G Data Sheet 3 Rev. 1.0, 2009-05-14 IFX1050G Block Diagram 2 Block Diagram &$1+ &$1/ 9&& 'ULYHU 2XWSXW 6WDJH 7HPS 3URWHFWLRQ 0RGH&RQWURO 7[' ,1+ 50 5HFHLYHU *1' Figure 1 Data Sheet 5[' Block Diagram 4 Rev. 1.0, 2009-05-14 IFX1050G Pin Configuration 3 Pin Configuration 3.1 Pin Assignment 7[' ,1+ *1' &$1+ 9&& &$1/ 5[' 50 3,1&21),*B,);69* Figure 2 Pin Configuration 3.2 Pin Definitions and Functions Pin Symbol Function 1 TxD CAN transmit data input; 20 k pull - up, "LOW" in dominant state 2 GND Ground 3 VCC 5 V Supply input 4 RxD CAN receive data output; "LOW" in dominant state, integrated pull - up 5 RM Receive - Only input; control input, integrated 20 k pull - up, "LOW" to activate Receive - Only Mode 6 CANL Low line I/O; "LOW" in dominant state 7 CANH High line I/O; "HIGH" in dominant state 8 INH Inhibit Input; control input, 20 k pull - up, "LOW" to activate Normal Mode Data Sheet 5 Rev. 1.0, 2009-05-14 IFX1050G Operation Modes 4 Operation Modes INH = 1 Normal Mode INH = 0 RM = 1 INH = 0 and RM = 1 Stand-by Mode INH = 1 RM = 0 / 1 RM = 0 RM = 1 INH = 0 and RM = 0 INH = 1 Receive-only Mode INH = 0 RM = 0 AED02924 Figure 3 Mode State Diagram The IFX1050G is equipped with three different operation modes. 4.1 Normal Mode In the Normal Mode the device is able to receive data from the CAN bus and to transmit messages to the CAN bus. The IFX1050G enters Normal Mode by setting the INH input to logical "LOW" and the RM input to logical "HIGH" (see Figure 3). 4.2 Stand - By Mode Stand - By Mode is a Low - Power mode with reduced current consumption on the power supply VCC. In Stand - By Mode the receiver and the transceiver of the IFX1050G are disabled and the device can not receive any data from the CAN bus, nor transmit any data to the CAN bus. The IFX1050G enters Stand - By Mode by setting the INH input to logical "HIGH" (see Figure 3). When the Stand - By mode is not used the INH pin has to be connected to GND in order to switch the IFX1050G permanently into Normal Mode. 4.3 Receive - Only Mode The Receive - Only Mode can be used for diagnostic purposes (to check the bus connections between the nodes) as well as to prevent the bus being blocked by a faulty permanent dominant TxD input signal. In Receive - Only Mode the output stage of the transceiver IFX1050G is disabled. The IFX1050G can not send any data to the CAN bus, but is still able to receive data from the CAN bus. The IFX1050G enters Receive - Only Mode by setting the RM input and the INH input to logical "LOW" (see Figure 3). In case the Receive - Only Mode is not used, the RM pin can be left open or it can be also connected to the power supply VCC. Data Sheet 6 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics 5 Electrical Characteristics 5.1 Absolute Maximum Ratings Table 1 Absolute Maximum Ratings Parameter Symbol Limit Values Unit Remarks Min. Max. VCC VCANH/L VI VESD -0.3 6.5 V - -40 40 V - -0.3 VCC V 0 V < VCC < 5.5 V -6 6 kV human body model (100 pF via 1.5 k) VESD -2 2 kV human body model (100 pF via 1.5 k) Tj -40 160 C - Voltages Supply voltage CAN input voltage (CANH, CANL) Logic voltages at INH, RM, TxD, RxD Electrostatic discharge voltage at CANH, CANL Electrostatic discharge voltage Temperatures Junction temperature Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the data sheet. Fault conditions are considered as "outside" normal operating range. Protection functions are not designed for continuous repetitive operation. 5.2 Functional Range Table 2 Functional Range Parameter Symbol Supply voltage VCC Tj Junction temperature Limit Values Unit Remarks Min. Max. 4.5 5.5 V - -40 125 C - 160 200 C 10 C hysteresis Thermal Shutdown (junction temperature) Thermal shutdown temperature TjsD Note: Within the functional or operating range, the IC operates as described in the circuit description. The electrical characteristics are specified within the conditions given in the Electrical Characteristics table. 5.3 Thermal Resistance Pos. Parameter Symbol 5.3.1 Junction to Ambient1) RthJA Limit Values Min. Typ. Max. - - 185 Unit Conditions K/W 1) Not subject to production test, specified by design. Data Sheet 7 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics 6 Electrical Characteristics Table 3 Electrical Characteristics 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Typ. Max. Unit Remarks Current Consumption Current consumption ICC - 6 10 mA Recessive state; VTxD = VCC Current consumption ICC - 45 70 mA Dominant state; VTxD = 0 V Current consumption ICC - 6 10 mA Receive - Only Mode; RM = "LOW" Current consumption ICC,stb - 1 10 A Stand - By Mode; TxD = RM = "High" HIGH level output current IRD,H - -4 -2 mA LOW level output current IRD,L 2 4 - mA VRD = 0.8 x VCC, Vdiff < 0.4 V1) VRD = 0.2 x VCC, Vdiff > 1 V1) VTD,H - 0.5 x 0.7 x V Recessive state VTD,L 0.3 x 0.4 x - V Dominant state RTD 10 25 50 k - VINH,H - 0.5 x 0.7 x V Stand - By Mode; VINH,L 0.3 x 0.4 x - V Normal Mode RINH 10 25 50 k - VRM,H - 0.5 x 0.7 x V Normal Mode VRM,L 0.3 x 0.4 x - V Receive - Only Mode RRM 10 25 50 k - Receiver Output RxD Transmission Input TxD HIGH level input voltage threshold LOW level input voltage threshold TxD pull-up resistance VCC VCC VCC VCC Inhibit Input (pin INH) HIGH level input voltage threshold LOW level input voltage threshold INH pull-up resistance VCC VCC VCC VCC Receive only Input (pin RM) HIGH level input voltage threshold LOW level input voltage threshold RM pull-up resistance Data Sheet VCC VCC 8 VCC VCC Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics Table 3 Electrical Characteristics (cont'd) 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Typ. Max. Unit Remarks Bus Receiver Differential receiver threshold voltage, recessive to dominant edge Vdiff,d - 0.75 0.90 V -7 V < (VCANH, VCANL) < 12 V Vdiff = VCANH - VCANL Differential receiver threshold voltage dominant to recessive edge Vdiff,r 0.50 0.60 - V Common Mode Range CMR -7 - 12 V -7 V < (VCANH, VCANL) < 12 V Vdiff = VCANH - VCANL VCC = 5 V Differential receiver hysteresis Vdiff,hys Ri Rdiff - 150 - mV - 10 20 30 k Recessive state 20 40 60 k Recessive state VCANL/H 0.4 x - 0.6 x V VTxD = VCC CANH, CANL recessive output voltage difference Vdiff = VCANH - VCANL, no load Vdiff -1 - 0.05 V VTxD = VCC CANL dominant output voltage VCANL - - 2.0 V CANH dominant output voltage VCANH 2.8 - - V CANH, CANL dominant output voltage difference Vdiff = VCANH - VCANL Vdiff 1.5 - 3.0 V VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V VTxD = 0 V; VCC = 5 V CANL short circuit current ICANLsc 50 ICANHsc -200 ICANH/L,lk -50 120 200 mA -120 -50 mA -300 -400 A -100 -150 A ICANH/L,lk 50 280 400 A 50 100 150 A CANH, CANL input resistance Differential input resistance Bus Transmitter CANL/CANH recessive output voltage CANH short circuit current Output current CANH / CANL VCC -50 Output current CANH / CANL Data Sheet 9 VCC VCANLshort = 18 V VCANHshort = 0 V VCC = 0 V, VCANH = VCANL = -7 V VCC = 0 V, VCANH = VCANL = -2 V VCC = 0 V, VCANH = VCANL = 7 V VCC = 0 V, VCANH = VCANL = 2 V Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics Table 3 Electrical Characteristics (cont'd) 4.5 V < VCC < 5.5 V; RL = 60 ; VINH < VINH,ON; -40 C < Tj < 125 C; all voltages with respect to ground; positive current flowing into pin; unless otherwise specified. Parameter Symbol Limit Values Min. Typ. Max. Unit Remarks CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF CL = 47 pF; RL = 60 ; VCC = 5 V; CRxD = 20 pF Dynamic CAN-Transceiver Characteristics Propagation delay TxD-to-RxD LOW (recessive to dominant) td(L),TR - 150 280 ns Propagation delay TxD-to-RxD HIGH (dominant to recessive) td(H),TR - 150 280 ns Propagation delay TxD LOW to bus dominant td(L),T - 100 140 ns Propagation delay TxD HIGH to bus recessive td(H),T - 100 140 ns Propagation delay bus dominant to RxD td(L),R LOW - 50 140 ns Propagation delay bus recessive to RxD td(H),R HIGH - 50 140 ns 1) Vdiff = VCANH - VCANL Data Sheet 10 Rev. 1.0, 2009-05-14 IFX1050G Electrical Characteristics INH 7 CANH TxD RM 47 pF 8 1 5 60 RxD 6 4 20 pF CANL GND VCC 3 5V 100 nF 2 AEA03328.VSD Figure 4 Test Circuit for Dynamic Characteristics VTxD VCC(33V) GND VDIFF td(L), T td(H), T t VDIFF(d) VDIFF(r) VRxD td(L), R t td(H), R VCC(33V) 0.7VCC(33V) 0.3VCC(33V) GND td(L), TR td(H), TR t AET02926 Figure 5 Data Sheet Timing Diagrams for Dynamic Characteristics 11 Rev. 1.0, 2009-05-14 IFX1050G Application Information 7 Application Information Note: The following information is given as a hint for the implementation of the device only and shall not be regarded as a description or warranty of a certain functionality, condition or quality of the device. 120 IFX1050 VBat CAN Bus RM INH 7 6 RxD CANH TxD CANL 1) VCC GND 5 8 4 P 1 3 100 nF 2 100 nF GND ESD24VS2B e. g. TLE4270 VI + 22 F 100 nF 5V VQ + GND 22 F ECU 1 IFX1050 RM INH 7 6 CANH RxD CANL TxD 1) GND VCC 5 8 4 P 1 3 100 nF 2 100 nF GND ESD24VS2B e. g. TLE4270 VI + 22 F 100 nF VQ 5V GND + 22 F ECU 1 120 Figure 6 1) Optional Mode State Diagram Note: This is a very simplified example of an application circuit. The function must be verified in the real application. 7.1 * * * Further Application Information Please contact us for information regarding the Pin FMEA. Existing App. Note For further information you may contact http://www.infineon.com/ Data Sheet 12 Rev. 1.0, 2009-05-14 IFX1050G Package Outlines 8 Package Outlines 0.1 2) 0.41+0.1 -0.06 0.2 8 5 1 4 5 -0.2 1) M B 0.19 +0.06 C 8 MAX. 1.27 4 -0.21) 1.75 MAX. 0.175 0.07 (1.45) 0.35 x 45 0.64 0.25 6 0.2 A B 8x 0.2 M C 8x A Index Marking 1) Does not include plastic or metal protrusion of 0.15 max. per side 2) Lead width can be 0.61 max. in dambar area GPS01181 Figure 7 PG-DSO-8 (PG-DSO-8-16) Green Product (RoHS compliant) To meet the world-wide customer requirements for environmentally friendly products and to be compliant with government regulations the device is available as a green product. Green products are RoHS-Compliant (i.e Pb-free finish on leads and suitable for Pb-free soldering according to IPC/JEDEC J-STD-020). For further information on alternative packages, please visit our website: http://www.infineon.com/packages. Data Sheet 13 Dimensions in mm Rev. 1.0, 2009-05-14 IFX1050G Revision History 9 Revision History Revision Date Changes 1.0 2009-05-12 Initial data sheet Data Sheet 14 Rev. 1.0, 2009-05-14 Edition 2009-05-14 Published by Infineon Technologies AG 81726 Munich, Germany (c) 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.