FES16BT-E345 - VISHAY - Datasheet.Directory

FES16xT, FESF16xT, FESB16xT

www.vishay.com Vishay General Semiconductor

Revision: 28-Jun-2019 1Document Number: 88599

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Ultrafast Plastic Rectifier

DESIGN SUPPORT TOOLS AVAILABLE

FEATURES

• Power pack

• Glass passivated pellet chip junction

• Ultrafast recovery time

• Low switching losses, high efficiency

• High forward surge capability

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 245 °C (for D2PAK (TO-263AB) package)

• Solder dip 275 °C max. 10 s, per JESD 22-B106

(for TO-220AC and ITO-220AC package)

• AEC-Q101 qualified available

- Automotive ordering code: base P/NHE3

(for ITO-220AC and D2PAK (TO-263AB package))

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in high frequency rectifier of switching mode

power supplies, inverters, freewheeling diodes, DC/DC

converters, and other power switching application.

MECHANICAL DATA

Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified

(“_X” denotes revision code e.g. A, B,....)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: as marked

Mounting Torque: 10 in-lbs max.

PRIMARY CHARACTERISTICS

IF(AV) 16 A

VRRM 50 V to 600 V

IFSM 250 A

trr 35 ns, 50 ns

VF0.975 V, 1.30 V, 1.50 V

TJ max. 150 °C

Package

TO-220AC, ITO-220AC,

PAK (

TO-263AB)

Circuit configurations Single

CASE

PIN 2

PIN 1

TO-220AC ITO-220AC

PIN 1

PIN 2

HEATSINK

FES16xT Series FESF16xT Series

FESB16xT Series

PIN 2

PIN 1

PAK (TO-263AB)

3D Models

MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL FES

16AT

FES

16BT

FES

16CT

FES

16DT

FES

16FT

FES

16GT

FES

16HT

FES

16JT UNIT

Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 500 600 V

Maximum RMS voltage VRMS 35 70 105 140 210 280 350 420 V

Maximum DC blocking voltage VDC 50 100 150 200 300 400 500 600 V

Maximum average forward

rectified current at TC = 100 °C IF(AV) 16 A

Peak forward surge current 8.3 ms single half

sine-wave superimposed on rated load IFSM 250 A

Operating storage and temperature range TJ, TSTG -65 to +150 °C

Isolation voltage (ITO-220AC only)

from terminal to heatsink t = 1 min VAC 1500 V

FES16xT, FESF16xT, FESB16xT

www.vishay.com Vishay General Semiconductor

Revision: 28-Jun-2019 2Document Number: 88599

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Pulse test: 300 μs pulse width, 1 % duty cycle

Note

(1) AEC-Q101 qualified, available in ITO-220AC and TO-263AB package

ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL FES

16AT

FES

16BT

FES

16CT

FES

16DT

FES

16FT

FES

16GT

FES

16HT

FES

16JT UNIT

Maximum instantaneous forward

voltage 16 A VF (1) 0.975 1.30 1.50 V

Maximum DC reverse current at

rated DC blocking voltage

TC = 25 °C IR

10 μA

TC = 100 °C 500

Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A,

Irr = 0.25 A trr 35 50 ns

Typical junction capacitance 4.0 V, 1 MHz CJ175 145 pF

THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL FES FESF FESB UNIT

Typical thermal resistance, junction to case RJC 1.2 1.7 1.2 °C/W

ORDERING INFORMATION (Example)

PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE

TO-220AC FES16JT-E3/45 1.78 45 50/tube Tube

ITO-220AC FESF16JT-E3/45 1.80 45 50/tube Tube

TO-263AB FESB16JT-E3/45 1.33 45 50/tube Tube

TO-263AB FESB16JT-E3/81 1.33 81 800/reel Tape and reel

ITO-220AC FESF16JTHE3_A/P (1) 1.80 P 50/tube Tube

TO-263AB FESB16JTHE3_A/P (1) 1.33 P 50/tube Tube

TO-263AB FESB16JTHE3_A/I (1) 1.33 I 800/reel Tape and reel

FES16xT, FESF16xT, FESB16xT

www.vishay.com Vishay General Semiconductor

Revision: 28-Jun-2019 3Document Number: 88599

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Maximum Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Leakage Characteristics

Fig. 5 - Typical Junction Capacitance

050 100 150

Average Forward Rectied Current (A)

Case Temperature (°C)

Resistive or Inductive Load

110 100

100

150

200

250

300

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= T

max.

8.3 ms Single Half Sine-Wave

(JEDEC Method)

0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6

0.1

100

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

50 V to 200 V

300 V to 400 V

500 V to 600 V

= 125 °C

= 25 °C

020 40 60 80 100

0.1

100

1000

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Leakage

Current (μA)

50 V to 200 V

300 V to 400 V

TJ = 125 °C

TJ = 25 °C

TJ = 100 °C

0.1 110 100

100

1000

Reverse Voltage (V)

Junction Capacitance (pF)

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

50 V to 400 V

500 V to 600 V

FES16xT, FESF16xT, FESB16xT

www.vishay.com Vishay General Semiconductor

Revision: 28-Jun-2019 4Document Number: 88599

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

TO-220AC

CASE

PIN 2

PIN 1

0.635 (16.13)

0.625 (15.87)

0.415 (10.54) MAX.

0.154 (3.91) DIA.

0.148 (3.74) DIA.

0.113 (2.87)

0.103 (2.62)

0.370 (9.40)

0.360 (9.14)

0.160 (4.06)

0.140 (3.56)

0.057 (1.45)

0.045 (1.14)

0.105 (2.67)

0.095 (2.41) 0.037 (0.94)

0.027 (0.68)

0.205 (5.20)

0.195 (4.95)

0.022 (0.56)

0.014 (0.36)

1.148 (29.16)

1.118 (28.40)

0.560 (14.22)

0.530 (13.46)

0.110 (2.79)

0.100 (2.54)

0.350 (8.89)

0.330 (8.38)

0.145 (3.68)

0.135 (3.43)

0.603 (15.32)

0.573 (14.55)

0.055 (1.39)

0.045 (1.14)

0.185 (4.70)

0.175 (4.44)

ITO-220AC

0.025 (0.64)

0.015 (0.38)

0.404 (10.26)

0.384 (9.75)

0.076 (1.93) REF.

45° REF.

0.600 (15.24)

0.580 (14.73)

0.560 (14.22)

0.530 (13.46)

0.035 (0.89)

0.025 (0.64)

0.205 (5.21)

0.195 (4.95)

0.191 (4.85)

0.171 (4.35)

0.057 (1.45)

0.045 (1.14)

0.671 (17.04)

0.651 (16.54)

0.028 (0.71)

0.020 (0.51)

0.110 (2.79)

0.100 (2.54)

7° REF.

0.350 (8.89)

0.330 (8.38)

0.140 (3.56) DIA.

0.125 (3.17) DIA.

0.135 (3.43) DIA.

0.122 (3.08) DIA.

0.110 (2.79)

0.100 (2.54)

0.190 (4.83)

0.170 (4.32)

D2PAK (TO-263AB)

Mounting Pad Layout

0.670 (17.02)

0.591 (15.00)

0.105 (2.67)

0.095 (2.41)

0.08 (2.032) MIN.

0.15 (3.81) min.

0.33 (8.38) min.

0.42 (10.66) min.

0.140 (3.56)

0.110 (2.79)

0.021 (0.53)

0.014 (0.36)

0.110 (2.79)

0.090 (2.29)

0 to 0.01 (0 to 0.254)

0.055 (1.40)

0.047 (1.19)

0.055 (1.40)

0.045 (1.14)

0.190 (4.83)

0.160 (4.06)

0.205 (5.20)

0.195 (4.95)

0.624 (15.85)

0.591 (15.00)

0.037 (0.940)

0.027 (0.686)

0.105 (2.67)

0.095 (2.41)

0.360 (9.14)

0.320 (8.13)

0.411 (10.45)

0.380 (9.65)

0.245 (6.22)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.