PIN GRID ARRAY SOCKETS
Standard, Long Solder Tail
& Low Profile
www.mill-max.com 516- 9 2 2-60 0 0
98
Series 510, 511, 515
• Series 510, 511, & 515 PGA
sockets are available in three
solder tail lengths:
standard, long and low profile.
•Choice of three low force clips to
cover all applications.
•Hi-Temp PCT polyester insulator
material suitable for all forms of
soldering.
Ordering Information
1. Select pin type for PGA socket at left (standard, long, or low profile) to
determine series number.
2. Specify 2-digit plating code from chart at bottom of page
3. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
4. Determine the last 2 digits of part number from the Contact Chart below.
5 1 0
-- - -
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window Clip Type
EXAMPLE OF COMPLETE PART NUMBER:
510-43-068-11-061001
This is a 68 pin (11x11 grid) insulator with a 15,2 square
window and fitted with standard solder tail socket pins.
Pins are tin plated, inner contacts are Mill-Max #32
and are plated 0,76?m gold.
Clip
Type Contact (Clip) Chart
01
02
03
Mill-Max #32 clip, standard low force, recommended for devices
with less than 150 pins. See page 208 for details.
Mill-Max #43 clip, “ultra lite”, recommended for devices with
more than 250 pins. See page 209 for details.
Mill-Max #35 clip, ultra low force, recommended for devices with
more than 150 pins, but less than 250 pins. See page209 for details.
STANDARD SOLDER TAIL
SERIES 510
LONG SOLDER TAIL
SERIES 511
LOW PROFILE SOLDER TAIL
SERIES 515
Series Plating
Code
SPECIFY PLATING CODE XX= 1 3 9 1 93 4 1 4 3
Sleeve (Pin)
Contact (Clip)
200µ” Sn
10µ” Au 10µ” Au
0,38 0,64
2,41
0,51
2,79
3,71 4,19
3,18
0,38 0,64
2,62
0,51
2,79 3,81 4,19
4,32
0,38 0,64
2,44
0,76
2,79
3,84 3,1
2,74
0,25µm Au
0,76µm Au 0,76µm Au
5,08µm Sn/Pb
0,76µm Au
5,08µm Sn
