EUSA EGERMANY EFRANCE EUK ESWEDEN EBENELUX EPOLAND EITALY ESPAIN ENORWAY
EDENMARK EFINLAND ESWITZERLAND ECZECHIEN EHUNGARY ECIS E CHINA EJAPAN E KOREA
Product Overview
Base module with 2 ModPack interfaces and 50-pin ribbon-cable connector on the front-panel
Base module with 2 ModPack interfaces and 50-pin ribbon-cable connector behind the front-panel
Base module with 2 ModPack interfaces and 50-pin D-Sub connector on the front-panel
3034
3058
3075
Product Description Order No.
PEP Modular Computers GmbH
Apfeltrangerstr. 16
D-87600 KAUFBEUREN
Tel.: ++49 (0) 8341 803 0
Fax: ++49 (0) 8341 803 499
Poland
PEP Modular Computers Sp.zo.o
Al. Jerozolimskie 144
Pok 714 Vp
02-305 WARSZAWA
Tel.: ++48 (0) 2 28 23 55 73
Fax: ++48 (0) 2 28 23 55 73
Sweden
PEP Modular Computers AB
Hornackersvägen 8
Box 1430
S-18314 TÄBY
Tel.: ++46 (0) 8 756 72 60
Fax: ++46 (0) 8 732 63 10
USA
PEP Modular Computers Inc.
750 Holiday Drive, Building 9
Pittsburgh, PA 15220
Tel.: ++1 412 921 3322
Fax: ++1 412 921 3356
Toll free: 800/228-1737
Great Britain
PEP Modular Computers (UK) Ltd.
Riverside Business Centre
SHOREHAM-BY-SEA
BN43 6RE
Tel.: ++44 (0) 1273 44 11 88
Fax: ++44 (0) 1273 44 11 99
Korea
PEP-Dasan Systems
2F Seahun Bldg.
162-1 Samsung-dong
Kangnam-ku
Seoul 135090
SOUTH KOREA
Tel.: ++82 (0) 25 58 08 38
Fax: ++82 (0) 25 55 08 39
Benelux
PEP Modular Computers Benelux
Koning-Albert-Laan 46
B-1780 WEMMEL
Tel.: ++32 (0)2 461 04 08
Fax: ++32 (0)2 461 00 31
Postbus 9712
NL-4801 LV BREDA
Tel.: ++31 (0)76 5217 957
Fax: ++31 (0)76 5217 959
France
EURO PEP Paris
Les Bureaux du Manoir
18 Chemin du Fond du Chêne
F-78 620 L’ETANG LA VILLE
Tel.: ++33 (0) 1 39 16 10 30
Fax: ++33 (0) 1 39 16 10 25
VMOD-2(D)
EVisit our home page at: http://www.pep.com
VMOD-2
VMOD-2
VMOD-2D
Versatility: Accepts any 2 industrial I/O ModPacks
Host Interface: A24/A16:D16/D8, slave VMEbus
Address Range: 128 bytes A1-A6 or 4kByte A1-A11 available to each
ModPack to enable additional decoding
Address Modifier: Standard supervisor/user data or short supervisor/
user data access via jumpers
Address Pipelining: Support for “address pipelining” is provided
Data Bus: Full 8/16-bit data bus, plus all extended control lines
to each ModPack
Interrupt Request: IRQ 1-7, jumper selectable. Interrupt vector generat-
ed by the ModPack or via jumper setting
DTACK Generation: Generated by each of the fitted ModPacks
Local Reset: Two-wire input available on front-panel connector
which may be disabled by jumper setting
Power Req.: +5V DC (±5%), 140mA typically. without ModPacks
Dimensions: 3U 100mm x 160mm x 20.4mm (4HP)
Front Panel: 50-pin male flat ribbon cable header with retaining
latches (VMOD-2); 50-pin D-Sub connector (-2D)
Temp. Ranges: 0ºC to +70ºC
-40ºC to +85ºC (extended E2)
-55ºC to +85ºC (storage)
Humidity: 5% to 95% non-condensing
Characteristics
The VMOD-2(D) was created to
provide systems designers with
a selection of dedicated I/O
interfaces from PEP’s large
palette of industrial ModPack
modules.
Industrial ModPacks provide a cost-
effective solution for a wide variety of
applications, tailoring the VMOD-2(D)
to precisely fit a particular input/out-
put requirement.
Each ModPack interface accesses an 8
or 16-bit data-bus, supports 11 address
and extended control (IRQ) lines and
provides separate interrupt lines.An
additional reset facility initializes the
the VMOD-2(D) and its ModPacks.
Any two industrial I/O ModPacks from
an ever expanding range may be fitted
to cater for the needs of digital, ana-
log, communication or counter func-
tions. PEP’s open piggyback specifica-
tion is documented also for custom
solutions and is currently undergoing
the process of standardization
through the VITA organization.
© PEP 1998:
™ All trademarks are recognised,Subject to change without notice
Publication Number AB 15179 DS-0298