L130-4080001400001 - LUMILEDS HOLDING B.V.

ILLUMINATION

RoHS

COMPLIANT

No. E352519

LUXEON 3014 is an industry standard compatible footprint for ease

of installation into existing 3014 sockets and stays consistent with a

3.0mm x 1.4mm x 0.75mm package. LUXEON 3014 is hot-color targeted

at operating conditions—65°C. This low power device is an ideal

choice when uniformity and reduction in spottiness is necessary for

indoor designs.

LUXEON 3014

Hot-color targeted industry standard

package for uniform light

FEATURES AND BENEFITS PRIMARY APPLICATIONS

Industry standard footprint and package oering compatibility with

existing designs Indoor Area Lighting

1/9th ANSI micro-color binning enables tight color control Lamps

Hot-color targeted at 65°C which leads to better color accuracy Specialty Lighting

Rectangular package design allows for increased uniformity – Monochrome LED

Drive at maximum current, 120mA for superior value – Channel Lighting

– Signage

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................3

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Distribution Characteristics ...................................................................5

Light Output Characteristics ..........................................................................6

Forward Current Characteristics.......................................................................7

Radiation Patterns ...................................................................................8

Product Bin and Labeling Denitions ...............................................................9

Decoding Product Bin Labeling........................................................................9

Luminous Flux Bins ..................................................................................9

Color Bin Denition .................................................................................10

Forward Voltage Bins ...............................................................................16

Mechanical Dimensions..........................................................................16

Reow Soldering Guidelines ......................................................................17

Solder Pad Design ..................................................................................18

Packaging and Labeling Information...............................................................18

Pocket Tape .......................................................................................18

Reel...............................................................................................19

Moisture Barrier Bag (MBB) ..........................................................................20

Shipment Box ......................................................................................22

General Product Information

Product Test Conditions

LUXEON 3014 LEDs are tested and with a 20ms monopulse of 60mA at a junction temperature,Tj, of 25°C. Forward voltage and

luminous ux are binned at a Tj of 25°C, while color is hot targeted at a Tj of 65°C.

Part Number Nomenclature

Part numbers for LUXEON 3014 follow the convention below:

L 1 3 0 – A A B B 0 0 1 4 0 0 0 0 1

Where:

A A – designates nominal CCT (22=2200K, 25=2500K, 27=2700K, 30=3000K, 35=3500K, 40=4000K,

50=5000K, 57=5700K, 65=6500K, 80=8000K, 10=10000K)

B B designates minimum CRI (70=70CRI, 75=75CRI, 80=80CRI, 90=90CRI)

Therefore, the following part number is used for a LUXEON 3014 3000K 80CRI:

L 1 3 0 – 3 0 8 0 0 0 1 4 0 0 0 0 1

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON 3014 is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1. Product performance of LUXEON 3014 at 60mA and 30mA at test temperature.

NOMINAL

CCT [1]

MINIMUM

CRI [2, 3, 4]

LUMINOUS FLUX [3] (lm)TYPICAL

LUMINOUS

EFFICACY (lm/W)

TYPICAL

LUMINOUS

FLUX (lm)

TYPICAL

LUMINOUS

EFFICACY (lm/W) PART NUMBER

MINIMUM TYPICAL

60mA 30mA

8000K 70 23 26 140 14 151 L130-8070001400001

10000K 70 21 24 129 14 151 L130-1070001400001

5000K 75 25 27 145 14 151 L130-5075001400001

5700K 75 25 27 145 14 151 L130-5775001400001

6500K 75 25 27 145 14 151 L130-6575001400001

2200K 80 19 21 113 11 118 L130-2280001400001

2500K 80 21 23 124 12 129 L130-2580001400001

2700K 80 20 24 129 13 139 L130-2780001400001

3000K 80 22 26 140 12 129 L130-3080001400001

3500K 80 22 26 140 13 140 L130-3580001400001

4000K 80 23 27 145 14 151 L130-4080001400001

5000K 80 23 27 145 14 151 L130-5080001400001

5700K 80 23 27 145 14 151 L130-5780001400001

6500K 80 23 27 145 14 151 L130-6580001400001

2700K 90 17 19 102 10 108 L130-2790001400001

3000K 90 17 19 102 10 108 L130-3090001400001

3500K 90 19 21 113 11 118 L130-3590001400001

4000K 90 19 21 113 11 118 L130-4090001400001

5000K 90 19 22 118 12 129 L130-5090001400001

5700K 90 19 22 118 12 129 L130-5790001400001

6500K 90 19 21 113 11 118 L130-6590001400001

Notes for Table 1:

1. Correlated color temperature is hot targeted at Tj=65°C.

2. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ux measurements.

3. Typical CRI is approximately 2 points higher than the minimum CRI specied, but this is not guaranteed.

4. For 90CRI products, R9≥50.

Optical Characteristics

Table 2. Optical characteristics for LUXEON 3014 at 60mA, Tj=25°C.

PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [1] TYPICAL VIEWING ANGLE [2]

L130-xxxx001400001 140° 116°

Notes for Table 2:

1. Total angle at which 90% of total luminous ux is captured.

2. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON 3014 at 60mA, Tj=25ºC.

PART NUMBER

FORWARD VOLTAGE [1] (V) TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE (mV/°C) [2]

TYPICAL THERMAL

RESISTANCE — JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

L130-xxxx001400001 2.8 3.1 3.3 -2.0 to -4.0 35

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON 3014.

PARAMETER MAXIMUM PERFORMANCE

DC Forward Current [1,2] 120mA

Peak Pulsed Forward Current [1,3] 150mA

LED Junction Temperature [1] (DC & Pulse) 115°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 2

Operating Case Temperature [1] -40°C to 105°C

LED Storage Temperature -40°C to 100°C

Soldering Temperature JEDEC 020D 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse) -5V

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed 15% of the maximum allowable DC forward current

3. At 10% duty cycle with pulse width of 10ms.

Characteristic Curves

Spectral Distribution Characteristics

Figure 1a: Typical normalized power vs. wavelength for L130-xx70001400001 at 60mA, Tj=25ºC.

Figure 1b: Typical normalized power vs. wavelength for L130-xx80001400001 at 60mA, Tj=25ºC.

Light Output Characteristics

Figure 1c: Typical normalized power vs. wavelength for L130-xx90001400001 at 60mA, Tj=25ºC.

Figure 2a: Typical normalized light output vs. junction temperature for L130-xxxx001400001 at 60mA.

Forward Current Characteristics

Figure 2b: Typical normalized light output vs. forward current for L130-xxxx001400001 at Tj=25ºC.

Figure 3: Typical forward current vs. forward voltage for L130-xxxx001400001 at Tj=25ºC.

Radiation Patterns

Figure 4: Typical radiation pattern for L130-xxxx001400001 at 60mA, Tj=25ºC.

Figure 5: Typical polar radiation pattern for L130-xxxx001400001 at 60mA, Tj=25ºC.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux or radiometric power, color point, peak or

dominant wavelength and forward voltage.

LUXEON 3014 LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

A – designates luminous ux bin (example: B=10.0 to 11.5 lumens, F=17.0 to 19.0 lumens)

B C – designates color bin (example: 7D, 7E, 7F, 7G, 7H, 7J, 7K, 7L, 7M for 3000K parts)

D – designates forward voltage bin (example: T=2.80V to 2.90V, W=3.00V to 3.10V)

Therefore, a LUXEON 3014 with a lumen range of 10.0 to 11.5, color bin of 7D and a forward voltage range of 2.80V to 2.90V has

the following CAT code:

B 7 D T

Luminous Flux Bins

Table 5 lists the standard luminous ux bins for LUXEON 3014 emitters. Although several bins are outlined, product availability in

a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON 3014 at 60mA, Tj=25°C.

BIN LUMINOUS FLUX (lm)

MINIMUM MAXIMUM

A 8.5 10.0

B 10.0 11.5

C 11.5 13.0

D 13.0 15.0

E 15.0 17.0

F 17.0 19.0

G 19.0 21.0

H 21.0 24.0

J 24.0 28.0

K 28.0 32.0

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

Table 6a. 3- and 5-step MacAdam ellipse color bin denitions for L130-22xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

2200K Single 3-step MacAdam ellipse (0.5037, 0.4142) 0.0072 0.0042 51.0°

2200K Single 5-step MacAdam ellipse (0.5037, 0.4142) 0.0120 0.0070 51.0°

Notes for Table 6b:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Color Bin Denition

Figure 6: 3-, 4- and 5-step MacAdam ellipse illustration for Table 6.

Figure 7a: Color bin structure for LUXEON 3014 2200K, hot-color targeted at Tj=65°C.

Table 6c. 3- and 5-step MacAdam ellipse color bin denitions for L130-27xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

2700K Single 3-step MacAdam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.70°

2700K Single 5-step MacAdam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.70°

Notes for Table 6c:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.370

0.380

0.390

0.400

0.410

0.420

0.430

0.440

0.450

0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465 0.470 0.475 0.480 0.485 0.490

8J 8K

2580

2870K

Figure 7c: Color bin structure for LUXEON 3014 2700K, hot-color targeted at Tj=65°C.

Table 6b. 3- and 5-step MacAdam ellipse color bin denitions for L130-25xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

2500K Single 3-step MacAdam ellipse (0.4753, 0.4127) 0.0075 0.0042 53.0°

2500K Single 5-step MacAdam ellipse (0.4753, 0.4127) 0.0125 0.0070 53.0°

Notes for Table 6b:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 7b: Color bin structure for LUXEON 3014 2500K, hot-color targeted at Tj=65°C.

Table 6e. 3- and 5-step MacAdam ellipse color bin denitions for L130-35xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

3500K Single 3-step MacAdam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.00°

3500K Single 5-step MacAdam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.00°

Notes for Table 6e:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.360

0.370

0.380

0.390

0.400

0.410

0.420

0.430

0.380 0.385 0.390 0.395 0.400 0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440

3750K

3250K

Figure 7e: Color bin structure for LUXEON 3014 3500K, hot-color targeted at Tj=65°C.

Table 6d. 3- and 5-step MacAdam ellipse color bin denitions for L130-30xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

3000K Single 3-step MacAdam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.22°

3000K Single 5-step MacAdam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.22°

Notes for Table 6d:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.365

0.375

0.385

0.395

0.405

0.415

0.425

0.435

0.445

0.405 0.410 0.415 0.420 0.425 0.430 0.435 0.440 0.445 0.450 0.455 0.460 0.465

2870K

3200K

7E 7F

Figure 7d: Color bin structure for LUXEON 3014 3000K, hot-color targeted at Tj=65°C.

Table 6g. 3- and 5-step MacAdam ellipse color bin denitions for L130-50xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

5000K Single 3-step MacAdam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.62°

5000K Single 5-step MacAdam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.62°

Notes for Table 6g:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.320

0.330

0.340

0.350

0.360

0.370

0.380

0.390

0.325 0.330 0.335 0.340 0.345 0.350 0.355 0.360 0.365

5250K

3H 4750K

Figure 7g: Color bin structure for LUXEON 3014 5000K, hot-color targeted at Tj=65°C.

Table 6f. 3- and 5-step MacAdam ellipse color bin denitions for L130-40xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

4000K Single 3-step MacAdam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.72°

4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.72°

Notes for Table 6f:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.340

0.350

0.360

0.370

0.380

0.390

0.400

0.410

0.420

0.360 0.365 0.370 0.375 0.380 0.385 0.390 0.395 0.400 0.405 0.410

3750K

4250K

5E 5D

Figure 7f: Color bin structure for LUXEON 3014 4000K, hot-color targeted at Tj=65°C.

Table 6i. 3- and 5-step MacAdam ellipse color bin denitions for L130-65xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

6500K Single 3-step MacAdam ellipse (0.3123, 0.3282) 0.00669 0.00285 58.57°

6500K Single 5-step MacAdam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57°

Notes for Table 6i:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

0.295

0.305

0.315

0.325

0.335

0.345

0.355

0.365

0.290 0.295 0.300 0.305 0.310 0.315 0.320 0.325 0.330 0.335

7000K

6000K

Figure 7i: Color bin structure for LUXEON 3014 6500K, hot-color targeted at Tj=65°C.

0.310

0.320

0.330

0.340

0.350

0.360

0.370

0.310 0.315 0.320 0.325 0.330 0.335 0.340 0.345 0.350

6000K

5250K

Figure 7h: Color bin structure for LUXEON 3014 5700K, hot-color targeted at Tj=65°C.

Table 6h. 3- and 5-step MacAdam ellipse color bin denitions for L130-57xx001400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

5700K Single 3-step MacAdam ellipse (0.3287, 0.3417) 0.00746 0.00320 59.09°

5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09°

Notes for Table 6h:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Table 6j. 4-step MacAdam ellipse color bin denitions for L130-80xx01400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

8000K Single 4-step MacAdam ellipse (0.2966, 0.3126) 0.00844 0.00334 58.64°

Notes for Table 6j:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Table 6k. 4-step MacAdam ellipse color bin denitions for L130-10xx01400001 at 60mA, hot-color targeted at Tj=65°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

10000K Single 4-step MacAdam ellipse (0.2720, 0.2860) 0.00877 0.00332 63.28°

Notes for Table 6k:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 7j: Color bin structure for LUXEON 3014 8000K, hot-color targeted at Tj=65°C.

Figure 7k: Color bin structure for LUXEON 3014 10000K, hot-color targeted at Tj=65°C.

Forward Voltage Bins

Table 7. Forward voltage bin denitions for LUXEON 3014 at 60mA, Tj=25°C.

BIN FORWARD VOLTAGE [1] (V)

MINIMUM MAXIMUM

T 2.80 2.90

V 2.90 3.00

W 3.00 3.10

X 3.10 3.20

Y 3.20 3.30

Z 3.30 3.40

Notes for Table 7:

1. Lumileds maintains a tolerance of ±0.1V on forward voltage measurements.

Mechanical Dimensions

Notes for Figure 8:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 8: Mechanical dimensions for LUXEON 3014.

1,15

2,50

1,4

2,9

0,7 1,6

0,70

0,75

0,30

0,75

0,08

3,1MAX

3,2MAX

Reow Soldering Guidelines

Table 8. Reow prole characteristics for LUXEON 3014.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin) 150°C

Preheat Maximum Temperature (Tsmax) 200°C

Preheat Time (tsmin to tsmax) 60 to 120 seconds

Ramp-Up Rate (TL to Tp) 3°C / second maximum

Liquidus Temperature (TL) 217°C

Time Maintained Above Temperature TL (tL) 60 to 150 seconds

Peak / Classication Temperature (Tp) 260°C

Time Within 5°C of Actual Temperature (tp) 20 to 40 seconds

Ramp-Down Rate (Tp to TL) 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 9. Moisture sensitivity levels for LUXEON 3014.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

3 168 Hours ≤30°C / 60% RH 192 Hours +5 / -0 30°C / 60% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 9: Visualization of the acceptable reow temperature prole as specied in Table 8.

Packaging and Labeling Information

There are two labeling formats used on the reel, moisture barrier bag (MBB) and shipment box. Either Format A or Format B is

used throughout all the packaging steps. Lumileds uses CODE 128 barcode font on all the labels.

Pocket Tape

Notes for Figure 11:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Solder Pad Design

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 10: Recommended PCB solder pad layout for LUXEON 3014.

Figure 11: Pocket tape dimensions for LUXEON 3014.

Solder mask

Stencil

Top copper

0.69

0.79

1.61

0.60

0.80

0.70

0.72

0.62

Package geometric center

1.51

0.11

0.36

Reel

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Notes for Figure 13a and Figure 13b — Reel Label descriptions for customer use:

QR code and all other eld labels not described are for Lumileds internal use only.

1. Number of LED emitters in a reel.

2. Lumileds part number.

3. Product category code.

4. Unique production lot identication number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.

5. Country code of origin of manufacturing of parts. E.g. MY for Malaysia, CN for China according to ISO 3166-1 alpha-2 document.

6. Lumileds product name. Lumileds part number is provided in MBB label Format B #2 as shown in Figure 25c.

Figure 12: Reel dimensions for LUXEON 3014.

Figure 13a: Example of reel label format A.

Figure 13b: Example of reel label format B.

Moisture Barrier Bag (MBB)

Notes for Figure 14:

1. Drawings are not to scale.

There are two MBB labels attached (#1 and #2). The peeled o label (Figure 28) must be detached and axed to the reel upon

opening of the MBB package.

Notes for Figure 15a — MBB label descriptions for customer use:

QR code and all other eld labels not described are for Lumileds internal use only.

1. Number of LED emitters in a reel.

2. Lumileds part number.

3. Customer part number for custom requests only.

4. LED test date in YYWW format.

5. Kitting information for custom request only.

6. Unique production lot identication number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.

7. Product category code.

8. Date in which MBB was sealed in YYYYMMDD format.

Figure 14: Illustration of typical Moisture Barrier Bag (MBB) packaging of a LUXEON emitter reel. MBB consists of humidity indicator

card, desiccant bag, MBB label(s) and LED emitter reel. The MBB package is air-tight sealed per JEDEC J-STD-033C.

Figure 15a: Example of MBB label format A.

Notes for Figure 15b and Figure 15c — MBB label descriptions for customer use:

QR code and all other eld labels not described are for Lumileds internal use only.

1. Number of LED emitters in a reel.

2. Lumileds product name.

3. LED test date in YYWW format.

4. Unique production lot identication number. First six numbers refer to manufacturing date code in YYMMDD format. This number is required for traceability purpose.

5. Product category code.

6. Date in which MBB was sealed in YYYYMMDD format.

7. Lumileds part number.

8. Customer part number for custom requests only.

9. Kitting information for custom request only.

Figure 15b: Example of MBB label format B #1.

Figure 15c: Example of MBB label format B #2.

Shipment Box

Notes for Figure 16:

1. Drawings are not to scale.

Notes for Figure 17a — Shipment box label descriptions for customer use:

All other eld labels not described are for Lumileds internal use only.

1. Lumileds part number.

2. Customer part number for custom requests only.

3. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed.

Figure 16: Illustration of MBBs packing into a shipment box.

Figure 17a: Example of shipment box label format A.

Notes for Figure 17b — Shipment box label descriptions for customer use:

All other eld labels not described are for Lumileds internal use only.

1. Lumileds part number.

2. Customer part number for custom requests only.

3. Total number of LED emitters in a shipment box.

4. Maximum of 10 reels printed per label. For example, if there are 21 reels in a shipment box, there will be 3 labels printed.

5. Lumileds product name.

Figure 17b: Example of shipment box label format B.

DS208 LUXEON 3014

Product Datasheet 20160614

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or

any other damages, direct, indirect or consequential, resulting from the use of the provided

information and data. Although Lumileds Holding B.V. and/or its aliates have attempted to

provide the most accurate information and data, the materials and services information and data

are provided “as is,” and neither Lumileds Holding B.V. nor its aliates warrants or guarantees

the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aliates reserve the right to make changes without notice. You as user agree to this disclaimer

and user agreement with the download or use of the provided materials, information and data.

About Lumileds

Lumileds is the global leader in light engine technology. The company develops, manufactures and distributes groundbreaking

LEDs and automotive lighting products that shatter the status quo and help customers gain and maintain a competitive edge.

With a rich history of industry “rsts,” Lumileds is uniquely positioned to deliver lighting advancements well into the future by

maintaining an unwavering focus on quality, innovation and reliability.

To learn more about our portfolio of light engines, visit lumileds.com.