AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking Material and Finish Designator A = Aluminum, Black Anodize N = Aluminum, Electroless Nickel S = Stainless Steel, Passivate W = Aluminum, Cadmium, Olive Drab X = Aluminum, Nickel Fluorocarbon Polymer Y = Aluminum, Pure Dense Electrodeposited Aluminum Z = Aluminum, Zinc-Nickel CONNECTOR DESIGNATOR: A AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III B M85049/118 Product Series and Basic Part Number 08 S = Detented Self-Locking N = Non-Detented Self-Locking Use Dash (-) for Non-Self-Locking (See Note 5) E Coupling Nut S F Captive Self-locking Nut Typical A Thread Dash No. Table I C See Note 4 G B Knurl Style Optional W Screw D .06/.25 (1.52/6.35) Screw Extension H APPLICATION NOTES (c) 2013 Glenair, Inc. 1. Assembly to be identified with manufacturer's name and part number, space permitting. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-126 E-Mail: sales@glenair.com AS85049 AS85049/118 Straight Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw No. Size 03 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II A Thread Class 2B B Dia Max C Dim .031 (0.8) D Min E Max Length -- 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- 3 -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 -- 8 10 12 14 16 18 20 22 -- -- -- -- -- -- -- -- 9/16-24 UNEF 1/2-20 UNF 5/8-20 UNEF 3/4-20 UNEF 7/8-20 UNEF 1-20 UNEF 1 1/16-18 UNEF 1 3/16-18 UNEF 1 5/16-18 UNEF 1 7/16-18 UNEF 1 3/4-18 UNS 2-18 UNS 2 1/4-16 UN 2 1/2-16 UN 2 3/4-16 UN 3-16 UN 1 1/2-18 UNEF .95 (24.1) .89 (22.6) 1.01 (25.7) 1.14 (29.0) 1.26 (32.0) 1.39 (35.3) 1.51 (38.4) 1.64 (41.7) 1.176 (44.7) 1.89 (48.0) 2.14 (54.4) 2.40 (61.0) 2.64 (67.1) 2.89 (73.4) 3.14 (79.8) 3.39 (86.1) 1.95 (49.5) .219 (5.6) .219 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) .780 (19.8) .850 (21.6) .950 (24.1) 1.015 (25.8) 1.187 (30.1) 1.220 (31.0) 1.500 (38.1) 1.625 (41.3) .850 (21.6) .22 (5.6) .22 (5.6) .27 (6.9) .35 (8.9) .47 (11.9) .55 (14.0) .62 (15.7) .70 (17.8) .78 (19.8) .85 (21.6) .95 (24.1) 1.02 (25.2) 1.19 (30.2) 1.22 (31.0) 1.50 (38.1) 1.63 (41.4) .85 (21.6) 1.14 (29.0) 1.14 (29.0) 1.25 (31.8) 1.38 (35.1) 1.38 (35.1) 1.50 (38.1) 1.75 (44.5) 1.88 (47.8) 2.00 (50.8) 2.13 (54.1) 2.56 (65.0) 2.81 (71.4) 3.06 (77.7) 3.16 (80.3) 3.53 (89.7) 3.93 (99.8) 2.13 (54.1) 4-40 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 TABLE I: (Continued from Above) Dash No. Screw Size MIL-DTL-83723 Series III MIL-DTL-5015 MS3400 Series AS81703 Series III MIL-DTL-26482 Series II F Dim 03 4-40 -- -- 3 -- .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 8 .77 (19.6) .51 (13.0) .88 (22.4) .710 (18.00 10 .89 (22.6) .64 (16.3) .94 (23.9) .710 (18.00 12 1.01 (25.7) .76 (19.3) 1.12 (28.4) .710 (18.00 14 1.01 (25.7) .76 (19.3) 1.19 (30.3) .710 (18.00 16 1.13 (28.7) .88 (22.4) 1.44 (36.6) .710 (18.00 18 1.38 (35.1) 1.13 (28.7) 1.56 (39.6) .710 (18.00 20 1.51 (38.4) 1.25 (31.8) 1.69 (42.9) .710 (18.00 24 1.62 (41.1) 1.38 (35.1) 1.75 (44.5) .710 (18.00 -- 1.76 (44.7) 1.51 (38.4) 1.88 (47.8) .710 (18.00 -- 2.03 (51.6) 1.67 (42.5) 2.12 (53.8) .890 (22.6) -- 2.28 (57.9) 1.87 (47.5) 2.50 (63.5) .890 (22.6) -- 2.53 (64.3) 2.22 (56.4) 2.62 (66.5) .890 (22.6) -- 2.63 (66.8) 2.41 (61.2) 2.68 (68.1) .890 (22.6) -- 3.00 (76.2) 2.80 (71.1) 3.00 (76.2) .890 (22.6) -- 3.40 (86.4) 3.20 (81.3) 3.50 (88.9) .890 (22.6) -- 1.76 (44.7) 1.51 (38.5) 1.88 (47.8) .710 (18.0) 08 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 (c) 2013 Glenair, Inc. 4-40 4-40 4-40 4-40 4-40 6-32 6-32 6-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8 10 12 14 16 18 20 22 24 -- -- -- -- -- -- -- 8S 10S, 10SL 12, 12S 14.14S 16, 16S 18 20 22 24 28 32 36 40 44 48 -- -- -- 7 12 19 27 37 -- -- -- -- -- -- -- -- 61 G Dim Max H Dim Max Dimensions in inches (millimeters) and are subject to change without notice. Mil-Spec Backshells U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com B-127 Rev. 05.15.18 E-Mail: sales@glenair.com B