REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Veena 02/8/08 Suresh 02/8/08 G. C 17/8/08 2226A-06 Specifications: Current rating Voltage rating Maximum contact resistance Minimum insulation resistance Withstanding voltage Operating temperature rating Material and Finish: Insulator Insulator colour Contact Finish : : : : : : 3.0A ac/dc. 250V ac/dc. 20m. 1000M. 600V ac for one minute. -40C to +105C. : : : : High temperature plastic. Black. Phosphor bronze. Gold plated. Dimensions : Millimetres Specification Table Number of Positions A B Part Number 6 12.70 15.24 2226A-06 Dimensions : Millimetres Part Number Explanation: 2226 A - 06 http://www.farnell.com Single Row Number of Positions http://www.newark.com Number of Positions http://www.cpc.co.uk : 06 = 6 Positions. This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2008. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Veena DATE: 02/08/08 CHECKED BY: DATE: 02/08/08 SIZE DATE: 17/08/08 SCALE: NTS Suresh APPROVED BY: G.Cook Single Row Housing & Terminal - 6 Way A DWG NO. M10001509 U.O.M.: mm REV ELECTRONIC FILE 2226A-XX-F4(PC0006)_5_DWG A SHEET: 1 1 OF