2M x 8-Bit Dynamic RAM 2k Refresh (Hyper Page Mode-EDO) HYB 5117805/BSJ-50/-60 HYB 3117805/BSJ-50/-60 Advanced Information * 2 097 152 words by 8-bit organization * 0 to 70 C operating temperature * Hyper Page Mode-EDO-operation * Performance: -50 -60 tRAC RAS access time 50 60 ns tCAC CAS access time 13 15 ns tAA Access time from address 25 30 ns tRC Read/Write cycle time 84 104 ns tHPC Hyper page mode (EDO) cycle time 20 25 ns * Power dissipation: Power Supply Active HYB 5117805 HYB 3117805 -50 -50 -60 5 10% 440 -60 3.3 0.3 V 385 288 252 mW TTL Standby 11 7.2 mW CMOS Standby 5.5 3.6 mW * Read, write, read-modify-write, CAS-before-RAS refresh, RAS-only refresh, hidden refresh and test mode * All inputs, outputs and clocks fully TTL (5 V versions) and LV-TTL (3.3 V version)-compatible * 2048 refresh cycles / 32 ms (2k-refresh) * Plastic Package: P-SOJ-28-3 400 mil Semiconductor Group 1 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM The HYB 5(3)117805 are 16 MBit dynamic RAMs based on the die revisions "G" & "F" and organized as 2 097 152 words by 8-bits. The HYB 5(3)117805 utilizes a submicron CMOS silicon gate process technology, as well as advanced circuit techniques to provide wide operating margins, both internally and for the system user. Multiplexed address inputs permit the HYB 5(3)117805BJ to be packaged in a standard SOJ-28 plastic packages. Package with 400 mil width are available. These packages provide high system bit densities and are compatible with commonly used automatic testing and insertion equipment. Ordering Information Type Ordering Code Package Descriptions HYB 5117805BSJ-50 Q67100-Q1104 P-SOJ-28-3 400 mil 5V 50 ns EDO-DRAM HYB 5117805BSJ-60 Q67100-Q1105 P-SOJ-28-3 400 mil 5V 60 ns EDO-DRAM HYB 3117805BSJ-50 on request P-SOJ-28-3 400 mil 3.3 V 50 ns EDO-DRAM HYB 3117805BSJ-60 on request P-SOJ-28-3 400 mil 3.3 V 60 ns EDO-DRAM Pin Names and Configuration A0 - A10 Row Address Inputs A0 - A9 Column Address Inputs RAS Row Address Strobe OE Output Enable I/O1 - I/O8 Data Input/Output CAS Column Address Strobe WE Read/Write Input VCC Power Supply + 5 V for HYB 5117800 + 3.3 V for HYB 3117805 VSS Ground (0 V) N.C. Not Connected P-SOJ-28 400 mil V CC I/O1 I/O2 I/O3 I/O4 WE RAS N.C. A10 A0 A1 A2 A3 V CC 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 V SS 27 I/O8 26 I/O7 25 I/O6 24 I/O5 23 CAS 22 OE 21 A9 20 A8 19 A7 18 A6 17 A5 16 A4 15 V SS SPP02803 Semiconductor Group 2 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM I/O1 I/O2 Data IN Buffer I/O8 Data OUT Buffer OE & WE 8 CAS 8 No.2 Clock Generator Column Address Buffers (10) 10 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 10 Column Decoder Refresh Controller Sense Amplifier I/O Gating Refresh Counter (11) 4 1024 x8 11 11 RAS Row Address Buffers (11) 11 Row Decoder 2048 Memory Array 2048 x 1024 x 8 No.1 Clock Generator Voltage Down Generator VCC VCC (internal) SPB03456 Block Diagram Semiconductor Group 3 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM Absolute Maximum Ratings Operating temperature range ........................................................................................... 0 to 70 C Storage temperature range....................................................................................... - 55 to 150 C Input/output voltage (5 V versions) .................................................... - 0.5 to min (VCC + 0.5, 7.0) V Input/output voltage (3.3 V versions) ................................................. - 0.5 to min (VCC + 0.5, 4.6) V Power supply voltage (5 V versions) ....................................................................... - 1.0 V to 7.0 V Power supply voltage (3.3 V versions) .................................................................... - 1.0 V to 4.6 V Power dissipation (5 V versions) ............................................................................................. 1.0 W Power dissipation (3.3 V versions) .......................................................................................... 0.5 W Data out current (short circuit) ................................................................................................ 50 mA Note: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage of the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC Characteristics TA = 0 to 70 C, VSS = 0 V, tT = 2 ns Parameter Symbol Limit Values min. max. Unit Test Condition V 5 V Versions Power supply voltage VCC 4.5 5.5 Input high voltage VIH 2.4 VCC + 0.5 V 1 Input low voltage VIL - 0.5 0.8 V 1 Output high voltage (IOUT = - 5 mA) VOH 2.4 - V 1 Output low voltage (IOUT = 4.2 mA) VOL - 0.4 V 1 Power supply voltage VCC 3.0 3.6 V Input high voltage VIH 2.0 VCC + 0.5 V 1 Input low voltage VIL - 0.5 0.8 V 1 TTL Output high voltage (IOUT = - 2 mA) VOH 2.4 - V 1 TTL Output low voltage (IOUT = 2 mA) VOL - 0.4 V 1 CMOS Output high voltage (IOUT = - 100 A) VOH VCC - 0.2 - V CMOS Output low voltage (IOUT = 100 A) VOL - 0.2 V Input leakage current (0 V VIH VCC + 0.3 V, all other pins = 0 V) II(L) - 10 10 A 1 Output leakage current (DO is disabled, 0 V VOUT VCC + 0.3 V) IO(L) - 10 10 A 1 Semiconductor Group 4 3.3 V Versions Common Parameters 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM DC Characteristics (cont'd) TA = 0 to 70 C, VSS = 0 V, tT = 2 ns Parameter min. max. Unit Test Condition -50 ns version -60 ns version (RAS, CAS, address cycling: tRC = tRC MIN.) - - 80 70 mA mA 2, 3, )4 Standby VCC supply current (RAS = CAS = VIH) ICC2 - 2 mA - Average VCC supply current, during RAS-only ICC3 refresh cycles -50 ns version -60 ns version (RAS cycling, CAS = VIH, tRC = tRC MIN.) - - 80 70 mA mA 2, 4 Average VCC supply current, during hyper page ICC4 mode (EDO) -50 ns version -60 ns version (RAS = VIL, CAS, address cycling: tPC = tPC MIN.) - - 35 30 mA mA 2, 3, 4 ICC5 - 1 mA 1 Average VCC supply current, during CASICC6 before-RAS refresh mode -50 ns version -60 ns version (RAS, CAS cycling: tRC = tRC MIN.) - - 80 70 mA mA 2, 4 Average VCC supply current Standby VCC supply current (RAS = CAS = VCC - 0.2 V) Symbol Limit Values ICC1 2, 3, 4 2, 4 2, 3, 4 2, 4 Capacitance TA = 0 to 70 C, VCC = 5 V 10 %, f = 1 MHz Parameter Symbol Limit Values min. max. Unit Input capacitance (A0 to A10) CI1 - 5 pF Input capacitance (RAS, CAS, WE, OE) CI2 - 7 pF I/O capacitance (I/O1 - I/O8) CIO - 7 pF Semiconductor Group 5 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM AC Characteristics 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Common Parameters Random read or write cycle time tRC 84 - 104 - ns RAS precharge time tRP 30 - 40 - ns RAS pulse width tRAS 50 10k 60 10k ns CAS pulse width tCAS 8 10k 10 10k ns Row address setup time tASR 0 - 0 - ns Row address hold time tRAH 8 - 10 - ns Column address setup time tASC 0 - 0 - ns Column address hold time tCAH 8 - 10 - ns RAS to CAS delay time tRCD 12 37 14 45 ns RAS to column address delay tRAD 10 25 12 30 ns RAS hold time tRSH 13 - 15 - ns CAS hold time tCSH 40 - 50 - ns CAS to RAS precharge time tCRP 5 - 5 - ns Transition time (rise and fall) tT 1 50 1 50 ns Refresh period tREF - 32 - 32 ms Access time from RAS tRAC - 50 - 60 ns 8, 9 Access time from CAS tCAC - 13 - 15 ns 8, 9 Access time from column address tAA - 25 - 30 ns 8, 10 OE access time tOEA - 13 - 15 ns Column address to RAS lead time tRAL 25 - 30 - ns Read command setup time tRCS 0 - 0 - ns Read command hold time tRCH 0 - 0 - ns 11 Read command hold time referenced to RAS tRRH 0 - 0 - ns 11 CAS to output in low-Z tCLZ 0 - 0 - ns 8 Output buffer turn-off delay tOFF 0 13 0 15 ns 12 Output turn-off delay from OE tOEZ 0 13 0 15 ns 12 7 Read Cycle Semiconductor Group 6 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM AC Characteristics (cont'd) 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Data to CAS low delay tDZC 0 - 0 - ns 13 Data to OE low delay tDZO 0 - 0 - ns 13 CAS high to data delay tCDD 10 - 13 - ns 14 OE high to data delay tODD 10 - 13 - ns 14 Write command hold time tWCH 8 - 10 - ns Write command pulse width tWP 8 - 10 - ns Write command setup time tWCS 0 - 0 - ns Write command to RAS lead time tRWL 8 - 10 - ns Write command to CAS lead time tCWL 8 - 10 - ns Data setup time tDS 0 - 0 - ns 16 Data hold time tDH 8 - 10 - ns 16 Read-write cycle time tRWC 113 - 138 - ns RAS to WE delay time tRWD 64 - 77 - ns 15 CAS to WE delay time tCWD 27 - 32 - ns 15 Column address to WE delay time tAWD 39 - 47 - ns 15 OE command hold time tOEH 10 - 13 - ns Hyper page mode (EDO) cycle time tHPC 20 - 25 - ns CAS precharge time tCP 8 - 10 - ns Access time from CAS precharge tCPA - 27 - 32 ns Output data hold time tCOH 5 - 5 - ns RAS pulse width in EDO mode tRAS 50 200k 60 200k ns CAS precharge to RAS delay tRHCP 27 - 32 - ns OE setup time prior to CAS tOES 5 - 5 - 5 Write Cycle 15 Read-Modify-Write Cycle Hyper Page Mode (EDO) Cycle Semiconductor Group 7 7 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM AC Characteristics (cont'd) 5, 6 TA = 0 to 70 C, VCC = 5 V 10 % / VCC = 3.3 V 0.3 V, tT = 2 ns Parameter Symbol Limit Values -50 Unit Note -60 min. max. min. max. Hyper Page Mode (EDO) Read-Modify-Write Cycle Hyper page mode (EDO) read-write cycle time tPRWC 58 - 68 - ns CAS precharge to WE tCPWD 41 - 49 - ns CAS setup time tCSR 10 - 10 - ns CAS hold time tCHR 10 - 10 - ns RAS to CAS precharge time tRPC 5 - 5 - ns Write to RAS precharge time tWRP 10 - 10 - ns Write hold time referenced to RAS tWRH 10 - 10 - ns tCPT 35 - 40 - ns Write command setup time tWTS 10 - 10 - ns Write command hold time tWTH 10 - 10 - ns CAS hold time tCHRT 30 - 30 - ns RAS hold time in test mode tRAHT 30 - 30 - ns CAS-before-RAS Refresh Cycle CAS-before-RAS Counter Test Cycle CAS precharge time (CAS-before-RAS counter test cycle) Test Mode Semiconductor Group 8 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM Notes All voltages are referenced to VSS. ICC1, ICC3, ICC4 and ICC6 depend on cycle rate. ICC1 and ICC4 depend on output loading. Specified values are obtained with the output open. Address can be changed once or less while RAS = VIL. In case of ICC4 it can be changed once or less during a hyper page mode (EDO) cycle 5. An initial pause of 200 s is required after power-up followed by 8 RAS cycles of which at least one cycle has to be a refresh cycle, before proper device operation is achieved. In case of using the internal refresh counter, a minimum of 8 CAS-before-RAS initialization cycles instead of 8 RAS cycles are required. 6. AC measurements assume tT = 2 ns. 7. VIH (MIN.) and VIL (MAX.) are reference levels for measuring timing of input signals. Transition times are also measured between VIH and VIL. 8. Measured with the specified current load and 100 pF at VOL = 0.8 V and VOH = 2.0 V. Access time is determined by the latter of tRAC, tCAC, tAA, tCPA, tOEA. tCAC is measured from tristate. 9. Operation within the tRCD (MAX.) limit ensures that tRAC (MAX.) can be met. tRCD (MAX.) is specified as a reference point only. If tRCD is greater than the specified tRCD (MAX.) limit, then access time is controlled by tCAC. 10.Operation within the tRAD (MAX.) limit ensures that tRAC (MAX.) can be met. tRAD (MAX.) is specified as a reference point only. If tRAD is greater than the specified tRAD (MAX.) limit, then access time is controlled by tAA. 11.Either tRCH or tRRH must be satisfied for a read cycle. 12.tOFF (MAX.), tOEZ (MAX.) define the time at which the output achieves the open-circuit conditions and are not referenced to output voltage levels. tOFF is referenced from the rising edge of RAS or CAS, whichever occurs last. 13.Either tDZC or tDZO must be satisfied. 14.Either tCDD or tODD must be satisfied. 15.tWCS, tRWD, tCWD and tAWD are not restrictive operating parameters. They are included in the data sheet as electrical characteristics only. If tWCS > tWCS (MIN.), the cycle is an early write cycle and data out pin will remain open-circuit (high impedance) through the entire cycle; if tRWD > tRWD (MIN.), tCWD > tCWD (MIN.) and tAWD > tAWD (MIN.), the cycle is a read-write cycle and I/O will contain data read from the selected cells. If neither of the above sets of conditions is satisfied, the condition of I/O (at access time) is indeterminate. 16.These parameters are referenced to the CAS leading edge in early write cycles and to the WE leading edge in read-write cycles. 1. 2. 3. 4. Semiconductor Group 9 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CRP t CAS VIH CAS VIL t RAD t ASR t RAL t CAH t ASC t ASR VIH Address Row VIL Column Row t RAH t RCH t RRH t RCS VIH WE VIL t AA t OEA VIH OE VIL t DZC t CDD t DZO I/O (Inputs) t ODD VIH VIL t OFF t CAC t CLZ VOH Hi Z I/O (Outputs) V OL t OEZ Valid Data OUT Hi Z t RAC "H" or "L" SPT03025 Read Cycle Semiconductor Group 10 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CRP t CAS VIH CAS VIL t RAL t RAD t ASR t ASC t CAH t ASR VIH Address Row VIL Column t RAH t CWL t WCS VIH Row t WP WE VIL t WCH t RWL VIH OE VIL t DS I/O (Inputs) t DH VIH Valid Data IN VIL VOH I/O (Outputs) V OL Hi Z "H" or "L" SPT03026 Write Cycle (Early Write) Semiconductor Group 11 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CSH t RCD t RSH t CAS VIH t CRP CAS VIL t RAD t RAL t CAH t ASC t ASR t ASR VIH Address Row VIL Column Row t RAH t CWL t RWL t WP VIH WE VIL t OEH VIH OE VIL t ODD t DZO t DZC I/O (Inputs) t DH t DS VIH Valid Data VIL t CLZ t OEZ t OEA VOH I/O (Outputs) V OL Hi Z Hi Z "H" or "L" SPT03027 Write Cycle (OE Controlled Write) Semiconductor Group 12 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RWC t RAS VIH RAS VIL t CSH t RP t RSH t CAS t RCD t CRP VIH CAS VIL t RAH t ASR t CAH t ASC t ASR VIH Address Row Column Row VIL t RAD t CWL t AWD t CWD t RWL t WP t RWD VIH WE VIL t AA t RCS t OEA t OEH VIH OE VIL t DZC t DS t DZO I/O (Inputs) t DH VIH Valid Data IN VIL t ODD t CAC t OEZ t CLZ VOH I/O (Outputs) V OL Data OUT t RAC "H" or "L" SPT03028 Read-Write (Read-Modify-Write) Cycle Semiconductor Group 13 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RAS t RCD t RHCP VIH RAS VIL t HPC t RP t RSH t CP t CRP t CAS t CAS t CAS t CRP VIH CAS VIL t CSH t RAH t ASR t RAL t CAH t ASC t CAH t CAH t ASC Column 2 Column N t ASC VIH Address Row Column 1 VIL t RAD t RRH t RCS t RCH VIH WE VIL t CAC t AA t OES t OEA t CPA t CAC t AA t CPA t OFF VIH OE VIL t RAC t AA t CAC t CLZ VOH I/O (Output) V OL t COH Data OUT 1 t COH Data OUT 2 t OEZ Data OUT N "H" or "L" SPT03038 Hyper Page Mode (EDO) Read Cycle Semiconductor Group 14 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RAS t RCD t RHCP VIH RAS VIL t HPC t RP t CP t CRP t CAS t RSH t CAS t CAS t CRP VIH CAS VIL t CSH t RAH t ASR VIH Address VIL t ASC Row Address t CAH t ASC Column 1 t CAH t RAL t CAH t ASC Column 2 Column N t RAD t CWL t WCS t CWL t WCS t WCS t WCH t WCH t WP t RWL t CWL t WCH t WP t WP VIH WE VIL VIH OE VIL t DH t DS I/O (Input) t DH t DS t DH t DS VIH Data IN 1 Data IN 2 Data IN N VIL "H" or "L" SPT03039 Hyper Page Mode (EDO) Early Write Cycle Semiconductor Group 15 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RAS VIH RAS VIL t CSH t RP t CP t RCD t PRWC t CAS t RSH t CAS t CAS t CRP VIH CAS VIL t ASR t RAD t RAH t ASC t RAL t CAH t CAH t CAH t ASC t ASC t ASR VIH Address Row Column Column Column Row VIL t RWD t CWD t RCS t CPWD t CWD t CWL t CPWD t CWD t CWL t RWL t CWL VIH WE VIL t AWD t AA t AWD t WP t OEA t AWD t WP t OEA t WP t OEA t OEH t OEH t OEH VIH OE VIL t CLZ t DZC t CLZ t ODD t CLZ t CPA t ODD t DZC t DZO VIH I/O (Inputs) V IL Data IN t CAC t RAC VOH I/O (Outputs) V t OEZ t CPA t ODD Data IN t DH t DS t DZC Data IN t DH t AA t DS t OEZ t DS t AA Data OUT Data OUT t DH t CAC t OEZ Data OUT OL "H" or "L" SPT03031 Hyper Page Mode (EDO) Late Write and Read-Modify-Write Cycle Semiconductor Group 16 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RAS t RP VIH RAS VIL t CRP t RPC VIH CAS VIL t RAH t ASR t ASR VIH Row Address Row VIL VOH I/O (Outputs) V OL Hi Z "H" or "L" SPT03032 RAS-only Refresh Cycle Semiconductor Group 17 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RP t RAS t RP VIH RAS VIL t RPC t CP t CHR t RPC t CSR t CRP VIH CAS VIL t WRH t WRP VIH WE VIL VIH OE VIL t ODD I/O (Inputs) VIH VIL t CDD t OEZ VOH Hi Z I/O (Outputs) V OL t OFF "H" or "L" SPT03033 CAS-before-RAS Refresh Cycle Semiconductor Group 18 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RC t RP t RP t RAS t RAS VIH RAS VIL t RCD t RSH t CHR t CRP VIH CAS VIL t RAD t ASC t WRP t RAH t ASR t WRH t CAH t ASR VIH Address Row VIL Column Row t RCS t RRH VIH WE VIL t AA t OEA VIH OE VIL t DZC t CDD t DZO I/O (Inputs) t ODD VIH VIL t CLZ t CAC t OFF t RAC t OEZ VOH I/O (Outputs) V OL Valid Data OUT "H" or "L" Hi Z SPT03034 Hidden Refresh Cycle (Read) Cycle Semiconductor Group 19 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RC t RAS t RP t RAS t RP VIH RAS VIL t RCD t RSH t CHR t CRP VIH CAS VIL t RAD t ASC t RAH t ASR t ASR t CAH VIH Address Row VIL Column Row t WCS t WCH t WP t WRH t WRP VIH WE VIL t DS t DH I/O (Input) VIN Valid Data VIL VOH I/O (Output) V OL Hi Z "H" or "L" SPT03035 Hidden Refresh Early Write Cycle Semiconductor Group 20 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM Read Cycle t RAS t RP VIH RAS VIL t CHR t CSR t RSH t CP VIH t CAS CAS VIL t RAL t CAH t ASR t ASC VIH Address Column VIL t WRP Row t AA t RRH VIH WE VIL t WRH t CAC t RCS t RCH t OEA VIH OE VIL t CDD t DZC VIH I/O (Inputs) V IL t ODD t OFF t DZO t CLZ t OEZ VOH I/O (Outputs) V Write Cycle Data OUT t WCS OL t RWL t CWL t WRP t WCH VIH WE VIL t WRH t DH VIH OE VIL t DS VIH I/O (Inputs) V IL Data IN VOH I/O (Outputs) V Hi Z OL "H" or "L" SPT03036 CAS-before-RAS Refresh Counter Test Cycle Semiconductor Group 21 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM t RC t RP t RAS t RP VIH RAS VIL t RPC t CP t RPC t CHR t CRP t CSR VIH CAS VIL t RAH t ASR VIH Row Address VIL t WTH t WTS VIH WE VIL VIH OE VIL t ODD I/O (Inputs) VIH Hi Z VIL t CDD t OEZ VOH Hi Z I/O (Outputs) V OL t OFF "H" or "L" SPT03042 Test Mode Entry Semiconductor Group 22 1998-10-01 HYB 5(3)117805/BSJ-50/-60 2M x 8 EDO-DRAM Package Outlines GPJ05699 Plastic Package P-SOJ-28-3 (400mil) (SMD) (Plastic small outline J-leaded) Sorts of Packing Package outlines for tubes, trays etc. are contained in our Data Book "Package Information". SMD = Surface Mounted Device Semiconductor Group 23 Dimensions in mm 1998-10-01