XPower Part Number: AA1010SE28ZC Reddish-Orange PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features z PLCC-4 package. z Single color. z High luminance. z High power,operating current @350mA. z Suitable for all SMT assembly methods. z Package : 500pcs / reel. Applications z Moisture sensitivity level : level 4. ztraffic signaling z Patent pending. zbacklighting (illuminated advertising , general lighting) z RoHS compliant. zinterior and exterior automotive lighting zsubstitution of micro incandescent lamps zportable light source (e.g. bicycle flashlight) zsignal and symbol luminaire for orientation zmarker lights (e.g. steps, exit ways, etc) Package Dimensions zdecorative and entertainment lighting zindoor and outdoor commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042 Selection Guide Dice Part No. AA1010SE28ZC Lens Type Reddish-Orange (AlGaInP) WATER CLEAR luminous Intensity [2] Iv(cd)@ 350mA v (lm) [2] @ 350mA Viewing Angle [1] Min. Typ. Min. Typ. 21/2 7.5 10 18 27 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous Flux: +/-15%. Absolute Maximum Ratings at TA=25C Symbol Value Unit Power dissipation Parameter Pt 1.05 W Junction temperature TJ 110 C Operating Temperature Top -40 To +85 C Storage Temperature Tstg -40 To +85 C IF 350 mA Peak Forward Current [2] IFM 500 mA Thermal resistance [1] Rth 60 C/W DC Forward Current [1] Notes: 1.Results from mounting on PC board FR4(pad size100mm 2 per pad), mounted on pc board-metal core PCB is recommend for lowest thermal Resistance. 2.1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics at TA=25C Parameter Wavelength at peak emission Dominant Wavelength IF=350mA IF=350mA [Typ.] [Typ.] Spectral bandwidth at 50%REL MAX IF=350mA [Typ.] Forward Voltage IF=350mA [Min.] Forward Voltage IF=350mA [Typ.] Forward Voltage IF=350mA [Max.] Symbol Value Unit peak 640 nm Dom [1] 625 nm 30 nm 2.0 2.5 VF [2] V 3.0 Temperature coefficient of peak IF=350mA, -10C T100C [Typ.] TCpeak 0.14 nm/ C Temperature coefficient of dom IF=350mA, -10C T100C [Typ.] TCdom 0.12 nm/ C Temperature coefficient of VF IF=350mA, -10C T100C [Typ.] TCV -3.0 mV/ C Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042 AA1010SE28ZC SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042 AA1010SE28ZC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042 PACKING & LABEL SPECIFICATIONS AA1010SE28ZC SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042