SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 1 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042
Part Number: AA1010SE28ZC Reddish-Orange
PRELIMINARY SPEC
XPower
Features
zPLCC-4 package.
zSingle color.
zHigh luminance.
zHigh power,operating current @350mA.
zSuitable for all SMT assembly methods.
zPackage : 500pcs / reel.
zMoisture sensitivity level : level 4.
zPatent pending.
zRoHS compliant.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.0 1") unles s otherwis e noted.
3. Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
Applications
ztraffic signaling
zbacklighting (illuminated adv ertising , general lighting )
zinterior and exterior autom otive lighting
zsubstitution of micro incandes cent lamps
zportable light source (e.g. bicycle flashlight)
zsignal and symbol luminaire f or orientation
zmarker lights (e.g. steps, exit ways, etc)
zdecorative and entertainme nt lighting
zindoor and outdoo r commercial and reside ntial
architectural lighting
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 2 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042
Selection Guide
Parameter Symbol Value Unit
Power dissipation Pt 1.05 W
Junction temperature TJ 110 °C
Operating Temperature Top -40 To +85 °C
S torage Temperature Tstg -40 To +85 °C
DC Forward Current [1] IF 350 mA
Peak Forward Current [2] IFM 500 mA
Thermal resistance [1] Rth 60 °C/W
Notes:
1.Results from mounting on PC board FR4(pad size≥100mm2 per pad), mounted on pc board-metal core PCB is recommend
for lowest thermal Resistance.
2.1/10 Duty Cycle, 0.1ms Pulse Width.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Parameter Symbol Value Unit
Wavelength at peak emission IF=350mA [Typ.] λpeak 640 nm
Dominant Wavelength IF=350mA [Typ.] λDom [1] 625 nm
Spectral bandwidth at 50%ΦREL MAX IF=350mA [Typ.] Δλ 30 nm
Forward Voltage IF=350mA [Min.]
VF [2]
2.0
V
Forward Voltage IF=350mA [Typ.] 2.5
Forward Voltage IF=350mA [Max.] 3.0
Temperature coefficient of λpeak
IF=350mA, -10°C≤ T≤100°C [Typ.] TCλpeak 0.14 nm/°C
Temperature coefficient of λdom
IF=350mA, -10°C≤ T≤100°C [Typ.] TCλdom 0.12 nm/°C
Temperature coefficient of VF
IF=350mA, -10°C≤ T≤100°C [Typ.] TCV -3.0 mV/°C
Part No. Dice Lens Type
luminous Intensity [2]
Iv(cd)@ 350mA
Фv (lm) [2]
@ 350mA
V
iewing
Angle [1]
Min. Typ. Min. Typ. 2θ1/2
AA1010SE28ZC Reddish-Orange (AlGaInP) WATER CLEAR 7.5 10 18 27 120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity / luminous Flux: +/-15%.
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 3 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042
AA1010SE28ZC
SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 4 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042
AA1010SE28ZC
Tape Specifications
(Units : mm)
Reel Dimension
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Reflow soldering is recommended and the soldering profile is shown bel ow.
Other soldering methods are not recommended as they might cause damage to the product.
SPEC NO: DSAH7221 REV NO: V.3 DATE: MAR/31/2009 PAGE: 5 OF 5
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP:1201100042
PACKING & LABEL SPECIFICATIONS AA1010SE28ZC
