(888) IPD-CONVerters (888) 473-2668 www.ipdconverters.com HAS SERIES - 60 WATT DESCRIPTION FEATURES HAS DC/DC converters are low-cost, industry standard, half-brick converters. The HAS features 2:1 input voltage, excellent efficiency, and open-frame packaging technology. Operation is guaranteed from -40C to 100C, and a built-in input pi filter ensures low noise operation. Available in several input and output combinations, the HAS is designed for industrial, telecom, and networking applications. * Industry Standard HalfBrick * Low-Cost Design * Open-Frame Packaging * 100C Baseplate Operation * * * * 24V and 48V Inputs Optional Enable Logic 1500V Isolation Input Pi Filter Efficiency vs. Load (24V Input) 90 EFFICIENCY % 85 TECHNICAL SPECIFICATIONS Input HAS060YH-A 75 EFF. (18v) 70 EFF. (24v) EFF. (36v) 65 Voltage Range 24 VDC Nominal 48 VDC Nominal Reflected Ripple Input Reverse Voltage Protection 18 - 36 VDC 36 - 72 VDC 25 mA Shunt Diode Remote Shutdown Reference Shutdown Pin Current, Sourced at Off 60 10 20 30 40 50 60 70 80 90 100 LOAD % 1% 0.2% Vout 0.2% Vout 0.5 VDC 10 % Iout Rated 25% Iout 4% Vout 500 s 10% Hiccup 110 - 140% 115 - 140% Vout Nom. Efficiency vs. Load (48V Input) 90 85 80 EFFICIENCY % Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., V in Nom. Remote Sense Headroom Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Voltage Trim Range Short Circuit / Overcurrent Protection Current Limit Threshold Range, % of Iout Rated OVP Trip Range 75 70 HAS060ZH-A 65 EFF. (36v) 60 EFF. (48v) 55 EFF. (72v) 50 Vin Negative 10 mA Max. 45 10 20 30 40 50 60 70 80 90 100 LOAD % General Turn-On Time Remote Shutdown Switching Frequency Isolation Input - Output Input - Case Output - Case Temperature Coefficient Case Temperature Operating Range Storage Range Thermal Shutdown Range Humidity Max., Non-Condensing Vibration, 3 Axes, 5 Min Each MTBF (Bellcore TR-NWT-000332) Safety Weight (approx.) 80 10 ms Positive or Negative Logic 500 kHz 1500 VDC 1050 VDC 500 VDC 0.03%/C -40 To +100C -40 To +125C 105 To 115C 95% 5 g, 10 - 55 Hz 2.5 x 106 hrs UL, CUL, TUV 1.4 oz 1 Notes MTBF predictions may vary slightly from model to model. Specifications typically at 25C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. Units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. HAS SERIES - 60 WATT MODELS - (See the last page of this file for options.) Vin (Volts) Vin Range (Volts) Iin Max.* (Amps) Vout (Volts) Iout Rated (Amps) Ripple & Noise Pk-Pk (mV) Efficiency Typ. ** Model 24 24 24 48 48 48 48 18 - 36 18 - 36 18 - 36 36 - 75 36 - 75 36 - 75 36 - 75 2.8 4.0 3.9 1.4 2.1 2.0 2.0 3.3 12 15 3.3 5 12 15 12 5 4 12 12 5 4 100 150 150 100 100 150 150 80% 85% 86% 81% 84% 85% 86% HAS040YE-A HAS060YH-A HAS060YJ-A HAS040ZE-A HAS060ZG-A HAS060ZH-A HAS060ZJ-A Denotes advanced product release. Consult factory for product availability. * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. MECHANICAL DRAWING 2.28" 0.18" (57.9mm) (4.6mm) MOUNTING INSERTS M3X.5 THROUGH 4PL 1 5 1.400"(35.6mm) 2 6 1.000"(25.4mm) 7 0.700"(17.8mm) 3 8 0.400"(10.2mm) 4 9 DIA 0.040" 2.40" BOTTOM VIEW (61.0mm) (1.0mm) 0 -0.50"(-12.7mm) 0.025" REF. 0 1.900" (0.6mm) (48.3mm) 0.50" (12.7mm) -0.19" (-4.8mm) Thermal Impedance Natural Convection 100 LFM 200 LFM 300 LFM 400 LFM 7.9 6.8 4.9 3.6 3.0 Pin C/W C/W C/W C/W C/W Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. Tolerances Function 1 2 3 4 5 6 7 8 9 -Vin Case On/Off +Vin -Vout -Sense Trim +Sense +Vout 2 Inches: .XX 0.020 .XXX 0.010 Pin: 0.002 (Millimeters) .X 0.5 .XX 0.25 0.05 ( Dimensions as listed unless otherwise specified.) OPTIONS When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION SUFFIX APPLICABLE SERIES Negative Logic N HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD Lucent Compatible Trim T HAS, HBD, HBS, HES, QBS, QES Terminal Strip TS REMARKS TTL "Low" Turns Module ON TTL "High" Turns Module OFF XWS, XWD, XWT Trim 1 IAS, LES Enable 2 IAD, IAS, LES, SMS Trim and Enable 3 IAS, LES Current Share 4 SMS Headerless Y Encapsulated EWS, IWS, OWS PIN LENGTH AND HEATSINK OPTIONS Standard Pin Length is 0.180" (4.6mm) 0.110" (2.8mm) Pin Length 8 All Units (Except SMS) 0.150" (3.8mm) Pin Length 9 All Units (Except SMS) 0.24" (6.1mm) Horizontal Heatsink 1H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.24" (6.1mm) Vertical Heatsink 1V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45" (11.4mm) Horizontal Heatsink 2H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.45" (11.4mm) Vertical Heatsink 2V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95" (24.1mm) Horizontal Heatsink 3H All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad 0.95" (24.1mm) Vertical Heatsink 3V All Units (Except DIP, SIP, and SM Packages) Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95" vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110" pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. 3